Liczymy pasujące modele…
Sadly my goto No1 / 3mm clipper cover for (Wahl trimmers) has broken and there is no replacement available without buying a full set This was made to be an absolute pattern fit and size to the original. If printing from STL you should…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Braid sold for slot car pick ups is often sold in one meter lengths that you need to cut yourself. These lengths are usually sold with no container, as a loose coil, which can be a PITA to put back where it goes pretty much every time you…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Rather than the short stubby handle, here's one you can print for use with a long broom handle. The hole is 23.2mm, so its for a (you guessed it) 23mm diameter broom handle with a .2mm clearence. There's also a hole in the back of it…
Wydruk około 5,86 €–7,17 € nettoWstępna wycena jednego wariantu
Mosquito Net Magnets. Magnets size: D: 10mm, H:3mm As the original, magnets are pressed into the holes and locket with glue(but personally, I use them without glue). The Windowmagnet can be glued on a strong adhesive tape, which is then…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder for 6x10 vials with 13mm diameter, tougher if printed from PETG. If you encounter issues printing without supports, try printing the version with supports.
Wydruk około 2,81 €–3,43 € nettoWstępna wycena jednego wariantu
Espresso Coffee Portafilter Stand Balanced 73m OD 58mm dia basket Stand for portafilter will rest without having to hold the handle. Small base to fit on a small scale. Stand designed to work with the portafilter of the Elektra…
Wydruk około 5,11 €–6,25 € nettoWstępna wycena jednego wariantu
I made this bundle of brackets so you can print your own when needed. Both L-shaped brackets and corner braces, inside and outside versions. All brackets are 3mm thick, with a 6mm thick version for extra strength when that is needed. The…
Update 07 Apr 24 A truncated version of this style and size of blast gate is now available (Print 835725) Update 06 Apr 24 Uploaded 63mm to 50mm adapter. The 63mm end sleeves outside the ball valve exit/entry tube (1.5mm taper), the 50mm…
A modified set of armor for the Dummy 13 type-F armor which integrates 3mm ports at the waist, hips, and thighs. With this set, your Dummy 13 can be equipped with accessories of other action figures and model kits that use 3mm pegs, such…
Simple interface plate with 4 locking lugs on one side and a 17mm ball socket on the other. Quick and simple in PLA, will likely build one in PET-G in coming weeks. Overture Easy Black PLA 6 walls, 25% infill, Exterior to interior…
Desktop stand for Xiaomi LYWSD03MMC temperature and humidity sensor. Original design by the thingiverse user pasiz I modified it for a better fit, the original was kind of tight.
Syringe plunger with 13mm end for use in 10cc Amtech flux tubes. I was fed up with trying to use a pen or my finger to push out flux, so I designed this! I recommend orienting the large end of the plunger to sit on the print bed so there…
Remove harmful fumes and VOC from the air to keep you, your family and your pets safe. This mod uses proven HEPA and activated carbon filters with powerful 5015 radial fans to achieve a 5.5x improved filtration over the axial version!…
A simple component you can use to represent a 3mm LED holder when designing cases etc. Not suitable for printing. The STEP file can be uploaded then imported into Fusion 360 to use with your projects. Alternative design to my other 3mm…
The Elegoo Centauri Carbon 2-Spool Adapter is a functional hardware modification designed to adapt the printer's stock spool holder to accommodate 63mm spools . The design utilizes a flanged, slotted cylinder to provide a fit for various…
Lehce modifikováno. Vnitřní průměr konstantní cca 33mm. Vnitřní průměr proměnný 26 - 29mm. Velikost rozstřiku zvětšena na 100mm. Bez podpor. Slightly modified. Inner diameter constant approx. 33mm. Inner diameter variable 26 - 29mm. Spray…
A model to fit air compressor hose to tubing (can fit tubing of 2mm ID with a tight seal)
This is connected with me being the new owner of a Bambu Labs A1 combo. Specifically, this adapter will shrink the hole in the centre of your Anycubic filament spool so that it works with the Bambu Labs AMS system. Also it has a super…
I was not satisfied with the already available lens-protectors so I made another one. This one is very slim and does not influence the general look of the sight too much. Meant for the cheap EOTech clones from China (e.g. for Airsoft). I…
Gridfinity Dimensions: 1x2x3U 2x2x3U Remix The model was made with OnShape and should be available to all https://cad.onshape.com/documents/d2b1533fdd4339235a0aeaef/w/dfd6302d8036a7602175fc06/e/bd297a3feee5e0f1c54b42ff
1/2" (13mm) PVC parts to build enclosures or shelves Parts: pvc clip: clip to hold fabric or plastic on the tube pvc-corner: to build a door or a frame pvc-3-corner: brackets to hold the corners pvc-table: clamp for 4mm board, can be used…
Remix to use common magnet size from Voron printers. How many you use is up to you. Unlikely to need to fill every hole.
Here is a fun little catapult design that relies on magnetic repulsion rather than spring tension to power it. This requires three 20x3mm magnets. Two will be embedded into the base and one will be glued into the arm of the catapult.…
Really quick remix for Biltema pegboard, as I needed one for HSW and one for Biltema pegboard. EDIT: Added remix for smaller 4mm hexbits.
For a Steampunk foam building project I made these brackets to hold 3mm to 7mm pipes to the walls of my structure. Made 5 years ago with meshmixer, so file size is somewhat large. Printed with 0.03 layerheight
All this holes have to disappear! just print at max resolution for best result! 0.1 precision is suggested to have 2 layer for the cap external part that is 0.2mm watch out they are very difficult to remove, so I've tried to print them as…
Initially, I drew a durable and convenient glasses case, but it can be used as a container for small items. Internal case dimensions: diameter 33 mm and length 155 mm. First change I added another version of the body half, making it a…
Remix of the original “LILYGO T-Embed CC1101 back shell with external antennas” by dansh with 6x3 magnets
Here's a little holder for a Xiaomi LYWSD03MMC to fit inside your Filament Dry Box. I use these sensors with ESPHome using the PVVX firmware and Home Assistant to monitor the humidity of my Dry Boxes.…
Diffuser for 13mm led strip. Diffuser is 1mm thick, i made it so i can put it on the sides of my table. Its sturdy, and light goes through it pretty good. Printed with Centauri Carbon White PLA 0.2mm layer height 10% Gyroid infill.
Multipurpose (bed leveling, etc) knobs with 43mm diameter. For brass inserts melting in: M4 (height 8mm) M5 (height 9.5mm)
I was tired of always having to remix drawer models so I decided to design a divider in 2 parts that fit together perfectly, can scale to whatever dimensions you like, print without supports and without brim. The result is a drawer…
https://www.castorama.pl/zlaczka-rury-ocean-63-mm-brazowa-id-1003107.html
All credit goes to CandianKorean. I just took his design an resized it down for a 230mm x 230mm box. I also added two optional risers to keep it tight height wise. Category: Games
A rivet that can be popped into a 6mm or 1/4" hole and made more-permanent by pushing a short length of 1.75mm filament into it. A horizontal and vertical orientation has been set up to see which prints best. The horizontal one may be…
Guides for rolling dough to 3mm thickness.
Fried Egg Fridge Magnet - (8x3mm magnet) This Fried Egg model has a magnet embedded within it. During slicing, add a pause to switch the filament to yellow at layer 9 (with 0.2mm layer height) if you don't have an MMU or AMS, and then…
Fillet Radius Finder (Inner/Outer) - Design Reference Ruler 21 to 27mm, This is a remix of product linked to underneath
I didn't have any 8x3 magnets on hand, so I made it fit 5x3mm magnets instead. Uses 2 magnets in the base, to make up for the lost diameter, plus are top-loaded, to get the magnets closer to the lid. Chamfered the inside and bottom edges…
This is a simple barrel-mounted holder for blowgun nail darts. It clips onto a 16mm diameter tube and holds 8 darts made from 3mm nails . The design keeps the darts secure so they don’t rattle or fall out, while still allowing quick…
Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament: 3DJake TPU A95 Category: Office
Made this for my desktop speakers to sit on to be off my desk. my print didnt need supports. pretty simple long ish shelf.
Adapt a pivotal 25.4mm post (common BMX size) to 30.9 seat tube ID. Recommend PETG-CF or PET-CF. Tried EasyPA but it's slippery... Shim head has a relief to prevent cracking/layer separation. Can be printed vertically with no issue, as…
Made a very simple holder for my large screwdrivers.
This is connected with me being the new owner of a Bambu Labs A1 combo. Specifically, this adapter will shrink the hole in the centre of your Anycubic filament spool so that it works with the Bambu Labs AMS system. Also it has a super…
A simple adaptor to connect the Makita 2012NB thickness planer extractor shroud to a 63mm flexible hose in a dust extraction system gcode reflects a PLA print, but as my mini hates PLA its a really slow config
Amazon shipped a small water pump for a fountain with no nozzle to connect the hose to, printed this one to replace it, maybe you need a replacement too. Should work with any pump that has a 13mm inner diamater outlet to connect to an 8mm…
Modified the magnet holes to fit 6mm x 3mm magnets Also had to modify the hole tolerances so its easier to print the overhangs, but will no longer be able to pressure fit the magnet in Had to thicken the walls a bit to fit the bigger…
This design is a handle for small drill bits. It is a remix from my blade handle and also uses a mandrel system to securely hold the drill. To build it you need a 25mm M3 screw and a melt insert. Print one "handle", one "Knob" and choose…
Made them for 3mm Panels and much more Clearance (~0.3-0.5mm)
Small part printed solid for strength. Use PETG or ABS, pla is not recommended
for 23mm handler for big soldering iron made for https://www.printables.com/model/1038915-fully-3d-printed-heat-set-press
Cable Organizer / Cable Clip - Clip RJ45 - USB Ø3mm USB Ø4mm - Ø6.5mm - Ø7mm - Ø8mm - Ø9mm - Ø10mm 12/01/2025 added: CPM_USB CPM_Ø7mm CPM_Ø9mm 19/01/2025 added: CPM_Rj45 Long Patch CPM_Ø6.5mm 10/03/2025 added: CPM_USB Ø3mm CPM_USB Ø4mm…
The text in the logo is made in a different font. The model should be checked and its measurements and settings made bef
I was not satisfied with the already available lens-protectors so I made another one. This one is very slim and does not influence the general look of the sight too much. Meant for the cheap EOTech clones from China (e.g. for Airsoft). I…
After printing the drill stopper sets of @cewo and seeing the included box design, I decided to make a different box using a living hinge and magnets to lock the lid. I've printed this with some generic PETG on a Bambu Lab P1S using the…
!!! This model is still in progress - I am adding new models/info !!! ------------------------------------------------------------------------------------- Background/What is it? In my leasure I like building simple cabinets, wardrobes,…
SVG file to laser-cut a character storage box for Gloomhaven character. Remix of etiennepb's model on Thingiverse.
To be paired with my Marshmallow Blaster Modular Breech , I've created a super simple method to attach a 31mmx33mm aluminum tube (Greg barrel) to launch Mega XL at frankly frightening velocities. Simply thread the 33mm_adapter onto to the…
Once I've lost one of my rod joints during kite play in field, I needed to design and print new ones on my own. Photo shows original and printed joint. Step and FreeCad source files for are attached. Feel free to modify it for your use.
Punisher Perle / Cord stopper / Kordelstopper 16-3mm / 32-6mm Kordelstopper geeignet für Streetjacken, Kapuzenpullover, Rucksackschnüre und ähnliches. Es sind 2 Varianten Kordelstopper 16-3mm = 16mm hoch max. 3mm Schnur Kordelstopper…
End cap to fit over a 43mm pipe, used for preventing dirt ingress while laying pipe over numerous days, while renovating a bathroom. This is not airtight, don't use for active waste pipeing Print in PETG or PLA, 3 walls should give good…
Wheel hub for 30mm Ranglebox tyres . Compliant, designed to be printed out of TPU, I use the same hub with a gear fitting on my competitive Antweights (150g). Since moving to these we've had significantly less motor failures due to the…
The handle for the balcony door is mounted on the outside of the balcony door. It can also be used on terrace door, door screens and similar applications. The holes spacing is 43 mm and 48 mm. The hole diameter is 4.6 mm. Add a small drop…
The base model is made for a 25mm pipe, I've made 2 variations, one for 21mm and one for 33mm pipe.
Joints to create a PVC door You'll need one 25mm M3 screw to attach the hinge. Hinge-A PVC-Corner-A.stl PVC-Corner-Frame-A.stl Hinge-B PVC-Corner-B.stl PVC-Corner-Frame-B.stl Please note: This is designed for 1/2" CTS (Copper Tube Size)…
Counting Trays 100 pcs. - 2mm 2.5mm 3mm 4mm 5mm 6mm 7mm 8mm
Fillet Radius Finder (Inner/Outer) - Design Reference Ruler 21 to 27mm, This is a remix of product linked to underneath
This a cover for the 3mm adjuster nut used on IOM sailboat shrouds. This allows you to use your fingers instead of a tool for changing the location. It can be used for other sailboats and many other things as well. It is designed to fit a…
This is a remix of the original snap fit case bottom as well as the version of the top made for the Armor Lite V5 heatsink. This remix is based on the V3.1 case. I printed this with Sunlu transparent PLA with the 0.25mm Structural…
I made these to rebuild my Kawasaki H1 forks, they should work for any 36mm fork. 6x2 magnetic insert holes allow for press fit, which will keep the soft jaws in place while you work. I used IEMAI PETG CF with Anycubic Kobra S1, .6mm…
Adapt a pivotal 25.4mm post (common BMX size) to 30.9 seat tube ID. Recommend PETG-CF or PET-CF. Tried EasyPA but it's slippery... Shim head has a relief to prevent cracking/layer separation. Can be printed vertically with no issue, as…
****************** Long Shaft Servo Discontinued ****************** The long shaft servo was discontinued :(. I removed the alpha 0.1 printable mount for the short shaft motor as it didn't work. I'm working on a new mount that shifts the…
Simple base to instal humidity sensor on 3mm Plexi. Printed from PLA with small suports
Simple adapter to snugly fit into JAYO PLA spools and then slide onto AD5X spool holder. Takes JAYO spool with 73mm diameter opening and steps it down to 54mm. Fits onto AD5X very snugly, so I recommend leaving adapter on the spool holder…
The divider is about 43mm wide and 40mm high with a 1.2mm depth
I really like the hinged version of Top Cover mode for CoreOne, but I only have 8x3mm magnets at home so I remixed the original back cover with 105°angle to hold them. Also i used stepped chamfers from main Top Cover model so it snaps…
TIRED OF THROWING A PARTY AND SOME JABRONI TURNS OFF THE LIGHT SWITCH THAT POWERS YOUR SMART SWITCH BECAUSE YOUR RENTAL WAS BUILT IN 1875 AND HASN'T BEEN UPGRADED SO YOU DON'T HAVE OVERHEAD LIGHTS? AND YOUR LANDLORD HAS THE AUDACITY TO…
This model includes the carriage of the Mad Max toolchanger, with 3mm holes instead of 1/8". This makes it easier to source parts. This is a drop-in replacement, so if you decide to use it, you only need to reprint this part. The…
Sakura Front Shock Mount Higher plus 1mm, 2mm and 3mm.. For those who have short shocks (52mm see the picture, i use +3mm mount) and they are weak (even the spring is pre-tensioned at maximum) you can even higher the mount to help it..
layer high 0.2 infill 45 shell 2 buttom 1 time 15h Category: 3D Printer Extruders
Support-less design. designed for cheap hot air guns that use a 33mm diameter handle. Printing in PLA is fine but be careful not to get the stand hot. I printed it with a 0.4mm nozzle, 4 walls and 15% rectilinear infill
.STL .DXF .SVG Uploaded Lissajous Figure Pattern 170x170x3mm Made with Lissajous Tool in PILED 3D CAD Multi Tool https://store.steampowered.com/app/3565810/PILED_3D_CAD_MULTI_TOOL/
Paper backups fail. Ink fades. Hardware wallets break. This 3mm stamping jig is designed to help you create a durable, offline backup of a 12–24 word crypto seed phrase (or any critical secret) by stamping directly into stainless steel…
See the pictures for one application. This adapter is designed to connect a 2-1/2 inch (63mm) hose fitting to a 4 inch (100mm) duct connection. The inner dimension is slightly tapered but is 2-1/2 inches (about 63mm) at its widest point.…
A simple Wrench with a 15° tilted 13mm Head. Modeled as a exercise, but maybe helpful for someone.
A magnetic clip to hold and display your Printables badges. @denisgomez_469657's original file was for (2) 5x3mm magnets, and I just altered slightly to accommodate (2) 6x3mm magnets.
Printed with : Creality Ender 5 S1 + Sonic Pad, 0.6mm Nozzle, PLA, 0.4mm Layer height, 50% Gyroid infill, 2 walls, Tree support. Slicer print time: 57 minutes. Print time: 39 minutes. ~5M of PLA = ~15gr = ~€0.30 worth of filament.…
Tool for unscrewing the back cover of a wristwatch case. For replacing the battery. The exact dimensions are shown in th
Bohrerhalter für 1-13mm in 0,5mm Schritte. Geeignet für Wandmontage. Die Bohrungen sind jeweils 0,5mm größer. Viel Spaß damit ;-)
