1 / 5
Core One Top Cover with Hinges - Remix for 8x3mm magnets — zdjęcie 1
1 / 5

Core One Top Cover with Hinges - Remix for 8x3mm magnets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Top Cover with hinges mod for Prusa CoreOne remixed to use 8x3mm N42 magnets.

Ocena
5 / 5
Polubienia
4
Pobrania
29
Wydruki
3
Wyświetlenia
267
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I really like the hinged version of Top Cover mode for CoreOne, but I only have 8x3mm magnets at home so I remixed the original back cover with 105°angle to hold them. Also i used stepped chamfers from main Top Cover model so it snaps inside easily. With my printer and my setting it worked as snap fit - without any glue but it may verry due to printer2printer tolerance differences!  

Print Settings: 

  • Print part with text side up
  • Material: PETG or ASA
  • Nozzle: 0.4mm
  • Layer: 0.20mm Structural
  • Infill: 20% Adaptive Cubic or Gyroid
  • Walls: 3
  • Supports: Build plate only (0.2 or 0.25 Z separation) 

Used magnets:

https://www.unimagnet.cz/neodymovy-magnet-kotouc-8-mm-v-3-mm-sila-1-3-kg_z11/

Parts:

1x Remixed back frame part with hinges 8x3mm magnets

1x original hinges

Rest of the Top Cover with vent model can be found in main design page below:

→ Prusa Core One Magnetic Top Cover with Integrated Vent Handle 

 

Tagi