Fried Egg Fridge Magnet - (8x3mm magnet)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Decorate your fridge or any magnetic surface with this Fried Egg Magnet.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Fried Egg Fridge Magnet - (8x3mm magnet)
This Fried Egg model has a magnet embedded within it. During slicing, add a pause to switch the filament to yellow at layer 9 (with 0.2mm layer height) if you don't have an MMU or AMS, and then pause again at layer 19 (with 0.2mm layer height) to insert the magnet. Ensure the pause happens right before the top layer covers the magnet slot. When placing the magnet, make sure it sits flush with the surrounding plastic.
If the magnet sticks out, it could damage your nozzle or other parts of your printer. Sometimes, the magnet can dislodge and attach to the nozzle (especially with Bambu printers). In this case, simply apply a drop of fast drying glue and wait for the required time.
Feel free to remix this design to suit your needs. If you have any questions or need assistance, don't hesitate to leave a comment or send me a message. And once you've printed, be sure to share your makes.
Happy printing!