Small Dessicant Box with Sliding Lid and Catch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small desiccant box measuring 56mm x 56mm x 26mm. Lid slides on via dovetail joint, and has catch to lock closed (but…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 126
- Wydruki
- 1
- Wyświetlenia
- 624
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Small desiccant box measuring 56mm x 56mm x 26mm. Lid slides on via dovetail joint, and has catch to lock closed (but can be reopened with a little effort). Air slots are 1mm wide.
The sliding dovetail requires a reasonably well-calibrated printer. If your printer is over-extruding, it may be too tight.
Sketchup design file included for those who want to change the design.
Silica-gel desiccant can be regenerated by baking at 75-90C (167-200F) for a few hours. Since PLA may soften at that temperature, I recommend a higher temperature filament (I used clear PETG.) If you use PLA, you will want to open the box and pour the desiccant into a baking pan for the oven, then return to the box after cooling a bit.
Print Settings
Printer Brand:
LulzBot
Printer:
Mini
Rafts:
No
Supports:
No
Resolution:
.25mm
Infill:
30%
Category: 3D Printer Accessories