Small Dessicant Box with Sliding Lid and Catch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small desiccant box measuring 56mm x 56mm x 26mm. Lid slides on via dovetail joint, and has catch to lock closed (but…
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 126
- Makes
- 1
- Views
- 624
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Small desiccant box measuring 56mm x 56mm x 26mm. Lid slides on via dovetail joint, and has catch to lock closed (but can be reopened with a little effort). Air slots are 1mm wide.
The sliding dovetail requires a reasonably well-calibrated printer. If your printer is over-extruding, it may be too tight.
Sketchup design file included for those who want to change the design.
Silica-gel desiccant can be regenerated by baking at 75-90C (167-200F) for a few hours. Since PLA may soften at that temperature, I recommend a higher temperature filament (I used clear PETG.) If you use PLA, you will want to open the box and pour the desiccant into a baking pan for the oven, then return to the box after cooling a bit.
Print Settings
Printer Brand:
LulzBot
Printer:
Mini
Rafts:
No
Supports:
No
Resolution:
.25mm
Infill:
30%
Category: 3D Printer Accessories