Modified dessicant box for cereal container filament dry box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified model for faster printing.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 337
- Wydruki
- 4
- Wyświetlenia
- 1654
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I liked a lof the original model, good size, robust, very good fitting between the lid and the box, bulky. However, I had a feeling it could be printed faster.
So, I decided to change the pattern on the lid and the bottom of box to avoid slow printing 90 degrees corners. I replaced the original grid with a curved pattern. I added several longitudinal curves and also 2 transversal ones to add a little stability and stiffness.
The result showed less improvement than I wanted, to be honest. My print time for the combo (lid + box) came from 1h41m to 1h27m, less than 15% improvement. In case you are going to print a dozen it may be worth. I could also increase the gap between the fins, but I don't want to take risks here.
My printing settings are: First layer heigh 0.20 mm, additional layers height 0.28 mm. Layer width 0.6 mm (grid fins are optimize for this setings with 1.2 mm),