Modified dessicant box for cereal container filament dry box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified model for faster printing.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 336
- Makes
- 4
- Views
- 1,645
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I liked a lof the original model, good size, robust, very good fitting between the lid and the box, bulky. However, I had a feeling it could be printed faster.
So, I decided to change the pattern on the lid and the bottom of box to avoid slow printing 90 degrees corners. I replaced the original grid with a curved pattern. I added several longitudinal curves and also 2 transversal ones to add a little stability and stiffness.
The result showed less improvement than I wanted, to be honest. My print time for the combo (lid + box) came from 1h41m to 1h27m, less than 15% improvement. In case you are going to print a dozen it may be worth. I could also increase the gap between the fins, but I don't want to take risks here.
My printing settings are: First layer heigh 0.20 mm, additional layers height 0.28 mm. Layer width 0.6 mm (grid fins are optimize for this setings with 1.2 mm),