Dessicant Holder for Polymaker and Prusament Filament Spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desiccant holder that easily clips inside the center opening of a Polymaker cardboard spool or Prusament plastic spool
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 164
- Wydruki
- 3
- Wyświetlenia
- 910
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This desiccant holder easily clips inside the center opening of a Polymaker cardboard filament spool or a Prusament plastic spools. The desiccant container does not need to be opened to remove it from the spool. The desiccant holder can quickly and easily be popped out of the spool and moved to a new spool when desired. The desiccant basket fills easily and the lid closes with a 90degree turn.
I printed these from PET-G so that the clips would have good flexibility. No supports should be required, but glue stick may be a good idea for the lid if you have problems getting PET-G to stick to your build plate. One of the lids is designed for the Polymaker cardboard spools and the other lid works with Prusament filament spools. The desiccant basket is interchangeable with either lid.