Counting matching models…
Stop wasting water on the surface and start nourishing your plants at the source. This innovative root irrigation spike delivers water directly to the root zone, ensuring deep, efficient hydration exactly where your plants need it. Simply…
Features Modular structure, easily scalable, put modules together, twist & lock, done Filling module with cap 3-way planting modules (hollow version recommended) Internal/external water dispenser modules Lid Custom net pot for Jiffy-7 41…
This handle is thicker than standard handles and has some extra reinforcement ribs on the inner side which makes it unbreakable. Cover for screws is also included. Choose correct orientation (left/right) for your door. For outdoor use I…
Einfach zu druckender Türgriff für die Terrasse aus PETG. Der Lochabstand beträgt 47mm. Griff stehend und mit 15% Infill gedruckt. Klammer auf der Seite liegend mit 0% Infill gedruckt. Easy to print balcony door handle made out of PETG…
I needed a door handle for my balcony door for gluing, because I live for rent and cannot simply screw into the door. I recommend to print version 2, because version 1 has your finger pinched. For gluing I used 25x50mm 3M adhesive pads…
A simple spike strip I made for my balcony handrail, to keep birds from resting and doing their business there. Nothing fancy as such. Dimensions copied from some strips I had purchased too little and ran out of. They came with two-sided…
Flowerpots/Planters to fit between the rails of our balcony railings. OpenSCAD file is included so you can easily make it fit yours! There are two variants of the pot (measures in mm ): a smaller one that fits between two rails:…
The plastic ornament at the corner of the roof and balcony on LGB wagons is somewhat fragile. This is a direct, printable replacement. Please DON'T print this part in PLA. It will be too brittle to survive a reasonable time. Printing it…
The model has been made only from the picture and the dimensions have been just roughly translated. Printed on a Prusa Mk2 with support Resolution: 0.15 / Infill: 20% Malta_Balcony_1.stl is with a ribbed roof Malta_Balcony_2.stl is…
Update 26th of March Updated the parts to be a single ring without flat parts around the contours of the followers. Otherwise the parts won't fit the output array. Furthermore the single balcony now connects to all three followers instead…
I used the dragon from: http://www.123dapp.com/creature/Gargoyle-Dragon/3355535 and BLENDER for cutting out the pipe. Two versions: for 50mm and 40 mm pipes Print Settings Printer Brand: RepRap Printer: Prusa I3 Rafts: No Supports: Yes…
Die ist ein flacher Griff für eine Balkon-/Terrassentür.
Repair your broken balcony door handle. Screw diameter: 4 mm Pitch between screws: 50 mm
Replacement balcony door handle Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: Yes Resolution: 0,25 Infill: 25% Category: Replacement Parts
I needed a flat door handle for my balcony door to glue. This is designed so that the shutters can still be closed. I have glued it with 3M double-sided adhesive strips with the dimensions 50x25mm.
Eine Halterung die an die Tür geschraubt werden kann um die Tür von außen entspannt zu zu ziehen.
If the door needs do be adjusted, the handles break before the screws damage the frame of the door, so sometimes you need them new. This part does not fit to the original base, because I needed to make the groove bigger then the original,…
This is a balcony-style thing to hold small items, in my case chalk for a blackboard. The model for the design were baroque style elements at bridges, roofs and balconies around Museumsinsel in Berlin, more specifically: the Inselbrücke.…
Improved version of the previous model. Includes a built-in lock that you can turn to block the balcony door from opening by itself. The holder can be mounted with double-sided tape to the door, so it is rental friendly. Dimensions…
Originally printed on MINI+ in PETG with some supports. I expect that PLA would work fine as well maybe even without support.
OpenForge 2.0 Towne Balcony / Gallery Separate wall tiles for building balcony or gallery railings attached to OpenForge towne wood floor tiles. (File names follow the OpenForge / OpenLOCK naming conventions, low poly tiles can be used…
This nice Lidl Playtive Dollhouse XXL comes with front door only. So I have created widows and balcony door which fits perfectly to prepared holes. Hinges are created using small piece of raw 1,75 mm filament. In my case the hinges works…
Dies ist ein Remix eines anderen Balkontürgriffs von Cristian . Ich habe ihn etwas runder gemacht und eine Abdeckung dazu entworfen. Die Maße ansich sind gleich geblieben und dem Bild des Orginals zu entnehmen. --- This is a remix of…
Ein Ersatzteil für Lechuza Blumenkübel. Es handelt sich um die Abdeckplatte ohne Loch, d. h. nicht für den Füllstandanzeiger sondern als Verschluss für die zweite Seite. Wenn dir mein(e) Modell(e) gefallen, hinterlasse mir bitte ein Like,…
This 50x50 filler cover fits on the Balconera Series (50 or 80). You get two files: the one with the hole and one without any hole. Please note: despite all Lechuza filler covers look the same on the Lechuza site, they have different…
Easy to print handle for a window/balcony door so it can be closed from the outside. Model Info All model files include the handle in its specific height and the screws covers. Make sure to choose “No” on importing the model into your…
Mini Dude Balcony desinged to fit Wekster Mini dues based on Statler and Waldorf Balcony from the Muppets show MINI Dudes shown not included, but can be downloaded below: Mini Bob: https://www.printables.com/model/484808-mini-bob Mini Mad…
Balcony door handle because the old one was broken. Printed from petg or asa. Balkontürgriff da der alte gebrochen war. Gedruckt aus petg oder asa.
Cap for Lechuza Balconera 50 or 80 cm trays. Print in PETG at 0.3mm or 0.2mm Layerheight.
Balcony door handle- two versions- one for doublesided tape and one attaches with screws. Category: Household
Introducing the Balcony Rail Planter: the perfect fusion of functionality and elegance for your urban gardening needs. Crafted with precision through cutting-edge 3D printing technology, this innovative planter is designed to bring life…
Description I designed my own lamp for my balcony that is easy to print, assemble, and maintain. The construction uses PLA+ 2.0, PETG, and TPU 95A depending on the part and its purpose. Bambulab .3mf Files vor Bambu Studio with print…
I made it in Fusion 360 for own use, but download it
Note: Header photo shows the provided version on the bottom left, a previous version (not published) is in the top right. Requirements You first need to make sure this pot fits your balcony handrail: Distance between bars: 105mm Size of…
This are endcaps for a balcony railing to prevent wasp building their nest inside the steel tubes. Rectangular Version: Size: 50 mm x 30 mm (outside), 45 mm x 25 mm (inside) It is designed to fit into a 50x30 profile with 2 mm wall…
An einigen meiner Balkontüren sind die Griffe altersbedingt abgebrochen. Also habe ich neue gemacht. The handles on some of my balcony doors have broken off due to age. So I made new ones.
My settings are provided in the .3mf file or .gcode. The main settings were: 0.4mm nozzle Overture PETG 4 perimeters 0.3mm Layer Height 25%/15% Cubic infill (more dense near load) Print two brackets per build plate (or 3 if you'll do two…
Printed with transparent PETG This solution can carry a lot. With a wall thickness of 2 mm and a dimension of 17 mm, it fits on standard cabinets, doors and windows. The length of the hook is 62mm and is 50mm at the bottom on the widest…
This is a sliding latch lock designed for securing plastic-metal balcony doors , built as a multi-part assembly: Main sliding body with mounting holes. Internal part with guiding cutouts that allow the latch lever to lock in place.…
Adjusting Screw for Lechuza Balconera planters like the ‘Balconera Cottage 50 granite’ ( https://www.lechuza.world/promo/balconera-cottage-50-granite/15602.html ). The adjusting screw has a wider head than the original. Thanks to Lechuza…
Filaments used: Devil Design PLA Black Devil Design PLA Dark Brown Devil Design PLA Brown Devil Design PLA Dark Red Devil Design PLA Dark Gray Devil Design PLA Beige Devil Design PLA Bright Yellow Devil Design PLA Vanilla Devil Design PLA…
This is a replacement part for a BG53 balcony handle. Das ist ein Ersatz für einen BG53 Balkontuergriff. The distance between the two outer screws is ca. 59 mm. Der Lochabstand zwischen den 2 äusseren Schrauben beträgt ca. 59 mm. Print…
Decorative balcony for Skadis, Three different sizes,in the balustrade style Created for my daughter for her Skådis pegboard. Printing is simple : first the bottom part, then attach the handle and insert the hooks. Prusament PLA Sakura…
Balcony box holder. I don't know how much weight it can hold. PETG best for heavy boxes or use more holder. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG…
While I was building my first Dollhouse I found some leftover pieces of plexiglass laying around. I designed some poles and just like that I got some cute balkony railing for this dollhouse. The poles can be screwed to the dollhouse with…
Jedná se o repliku z Schüco Balkontür-Schnäpper 287893 profil CT70. Na původním díle prasklo jedno rameno a potřeboval vyměnit. Originál moc dlouho nevydržel. Tiskl jsem z PETG. This is a replica of the Schüco Balkontür-Schnäpper 287893…
Works really well. With two of these you can mount umbrellas with a cylindrical main shafts onto your balcony railing. The railing has two have two or more horizontal rectangular bars whichs inside edges line up vertically. Rubber inlets…
Recommended settings: Material: PETG (PLA might not withstand high temperatures on balcony) Layer height: 0.35 mm Infill: 20% Other material: Screws Model files: Fusion 360 model - https://a360.co/3qQXBKM Build Video:
The distance between the centers of the holes is 48.5 mm. The hole is sized for M4 screw.
This planter should fit on balcony rails with a width of up to 45mms. It comes with 3 options you can combine as you wish: self-watering reservoir planter with water level indicator (TBD) draining planter with drain hole for excess water…
Zaoblené madlo namodelované podle originalního madla na klasických balkónových dveřích
We have an old style iron staircase, and wanted something simple for pot for the flowers. This is include two pot holders straight 45 degrees And the pot. Printing instructions: Pot - print in vase mode, it is faster and strong enough.…
Simply balcony flag holder mounting by 3 zipties (4mm) I recomend: 4 walls, min. 20% infill and PET-G or ASA. No support needed.
This very flat door handle fits easily between the balcony door and the insect screen. There was already a 4mm ISO thread on my door frame, which is why I'm using the single-screw variant (with washer and flat-head screw). Usually,…
I used this to replace the balcony flower pot attachments for balcony railings that were lost over the years. Slices well, at least in Cura. The size of the mesh should be 16.8 x 64.3 x 12.2 mm. Print Settings Printer Brand: Snapmaker…
Iconic Movie Moments - Annie Hall - The Balcony Date - 1977
Balcony door stopper for doors without a ventilation mode, or for doors that can be closed or fully opened without leaving a small ventilation gap. For fixing to door frame I used a double-sided sticky tape Printed from PETG on MK4s 4…
Here is a small size balcony pot for urban balconies. It is fixed with wire in the 2 holes provided (diameter 5mm). The bottom is well drained. I did not provide a cup. Voici une balconnière de petit format pour balcon urbain. Elle se…
This needs to be printed in a flexible filament, I designed it for TPU. Unlike many door stops that under the door to stop it's movement this design goes into the corner between door and frame which only opens when the door is open. The…
This Flower box holder is capable of holding a flower box on a thick balcony railing. It is designed that even during a storm, the flower box can only fall onto the balcony (and not onto people walking underneath)
I needed a solution to keep my balcony door open, but also easily release them at will, so I came up with this. The base of the door holder is glued to the floor with a strong, double sided mounting tape (remember to de-grease both…
CROW & BIRD REPELLENT FOR BALCONY RAILINGS Here is a simple solution to get rid of crows and other birds which perch on your balcony railings and wake you up early in the morning with their noisy voices or dirty your balcony with their…
New version uploaded (v10). The model is now more bulky and stiff, but it still fits. Print with supports - change type to organic for best performance and hange “seem” setting to random. Or use 3mf file for printing. I use PETG.
This is a slimline door handle for patios and balcony doors where space is limited due to a fly screen. Its only 8mm thick and very stable. Easy to print, because it lays flat on the bed.
Summary Assisting bracket for mount of parasols on balcony railings using zip ties, which enables stable mounting and reduces the need to turn the parasol. Dimensions Diameter of the pipe: 25,4mm (+- 1 mm) Maximum ziptie width: 6mm fully…
This is a printable scarecrow to keep your newly planted seeds from being devoured by birds. No more flying dino's digging up precious seeds, scare them off with this Dangerface Scarepeller! The scarepeller is effective against most of…
A detailed 3D model of a high-end contemporary residence featuring strong geometric volumes, a prominent upper-floor cantilever frame, and extensive glass openings. The layout includes a covered carport structure, integrated perimeter…
The design of this table is quite simple. It explains itself. You can print one made either with or without holes to hold drinks. It’s fabiouslous to hold your drink and snacks whilst reading a book there. Just print and lock it in place…
I was having trouble keeping the balcony door closed on windy days as it only locks from the inside, so I designed this simple but robust latch to keep it in place. Depending on what size screws you use you may need to tap bigger holes in…
Simple and easy to print model of handle to balcony door, it's renter friendly, you can use command strips or double sited tape to stick this handle to your door, no need to use screws. Dimensions Height- 7cm Width- 2,5cm Depth - 4cm
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Watering Cover for Lechuza Balconera with grid to prevent…
Small PV power plants are becoming popular and inexpensive. However, mounts are quite expensive. This is a 3d printed solution which is inexpensive and fits all kind of modules. This mount can be used to hold the panels on a flat surface,…
This is the first design I publish and the second ever made in my life, so every comment and suggestion is welcome! As title says, is a pratical solution i needed to design for myself because i don't have a near place to store my…
Découvrez le modèle 3D du Panier Extérieur pour Balcon, une solution pratique et esthétique pour ajouter de l'espace de rangement sur votre balcon. Imprimez ce panier en 3D et fixez-le facilement à la balustrade de votre balcon, pour…
Can help with close balcony window from outside. Printed with support.
The original model ( https://www.printables.com/model/113428-balcony-door-handle-with-cover-unbreakable ) had a different hole spacing than what I needed.
I printed it with PLA, 50% infill, 0.2mm layer height. Less infill should be good enough aswell.
Beer holder for hanging on a concrete balcony. It works flawlessly. It can be printed with supports, it is enough to print them only from the mat. They go down easily. If necessary, I can adjust the size of the holder, as every concrete…
I created a balcony gully cleaning shovel with 48mm width. it cleans the balcony rain pipe. for printing, you need to use supports.
This is a replacement handle for euro-style plastic french door or balcony door. Hole spacing (center-center 48mm) fits some handles originally delivered with doors in Czech Republic, but will work for any door if you use self tapping…
A simple lock for a window, e.g. a balcony window, to keep it in place.
You also need: 2x M6x60 2x M5x25 or 30 -nuts and washers I printed it in PETG with 20% infill. The width of the aluminum profile is 52mm. If you found this useful, please donate what you think it is worth to my paypal.me. Help cover the…
The basic part (p1) should be printed with minimum 40% fill.
Balcony bird feeder for handrail, 5 x 2.5 cm. It may fit slightly smaller rails. Printed with Anycubic Kobra 2 Neo, PLA, layer height 0.2 mm.
The handle for the balcony door is mounted on the outside of the balcony door. It can also be used on terrace door, door screens and similar applications. The holes spacing is 43 mm and 48 mm. The hole diameter is 4.6 mm. Add a small drop…
We've got 2 versions here one can be printed standing on the square cutout if you want to print the part in one piece, this is the simple Tableclamp.stl. The other version consists of two halves that snap together to make printing easier,…
We had these nice plant on our balcony and planned to let it grow. As a support i developed this system. You only need 4 x M4 Screws to fasten it. I printed it in PETG
Wir benutzen einen Briefkasten aus Edelstahl, um einige Werkzeuge für unsere Blumenkästen auf dem Balkon ordentlich und wettergeschützt aufzubewahren. Zum Aufhängen der Werkzeuge habe ich diese Haken entworfen. Die Maße sind 196 mm x 40…
An opera balcony, composed of 3 parts, pluggable, wall-mountable, lighting possible, for placing e.g. Mini 13, Dummy 13, Lucky 13 figures (print at 150%). I made it for the figures of statler and waldorf from Alex as you can see at the…
Flowerpot for the balcony to be hung on a railing of the terrace as in the picture. It has its dispenser for water. And it is printed with brackets. It is on a 75% scale so it can be made longer, shorter or wider.
Needed a way to keep my parasol steady on my apartment balcony. The balcony structure is round and is approx 44mm in diameter. The Parasol is 22mm in Diameter. I'm using 5mm bolts with washers to secure the bracket in place. Print…
Balcony clamp for Krmítko/Improved bird feeder . Print it with automatically generated tree supports. Use more walls and bigger infill. Bird feeder: https://www.printables.com/cs/model/58209-improved-bird-feeder Screw and screw end for…
Requirements You first need to make sure this pot fits your balcony handrail: Distance between bars: 105mm Size of bars: 18mm x 18mm Smaller bars may be compensated with more anti-slip material. Materials Ca. 265 g of filament (tested…
Portable AC Balcony Door Adapter I designed this because my apartment has no suitable window for a portable air conditioner exhaust hose. The only practical option was the balcony door. The common fabric zipper door seals were not a good…
I wanted to save some material and created a minimalistic mount. It ist just put between the 1cm iron bars of my balcony rail. The distance between the bars is 18mm.
Created with Solvespace. Printed with 0.6 nozzle.
This clamp holds the tubes of balcony awning tight and in place. Great improvement during heavy winds. Print with PETG as awnings are usually at sunny spots and some flexibility is required for the snapping. The Fusion file is available…
![Balcony door handle [Including F360 files]](https://media.printables.com/media/prints/279190/images/2473959_00732632-82d6-4f0d-8d2e-4a5c37cda868/shotcut_00_01_50_551.png)
![Balcony clothespins basket with room for socks and underwear [UNIVERSAL] (Customizable)](https://media.printables.com/media/prints/953672/images/7301122_ada3649f-0429-46c7-9ff1-eb942971f5f5_dc4a6078-76d7-49e8-aa45-3acffcd92e25/img_20240729_071507.jpg)
