BEARINGS - Print in place - with real rolling elements
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print in Place Bearings --- hard to print --- easy to fail --- READ DESCRIPTION !
- Ocena
- 4,806 / 5
- Polubienia
- 5427
- Pobrania
- 16 230
- Wydruki
- 118
- Wyświetlenia
- 62 210
- Oceny
- 93
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Print in Place Bearings with real rolling elements.
! ATTENTION !
- these models are hard to print and fail easily.
- your printer MUST be able to print gaps of 0,1mm width
- clean your printbed
- make sure, great adhesion is possible
- elements might stick to each other, free the parts by moving and cleaning
- the rolling elements of the bigger bearings might heave to be wiggled free with tweezers
! YOU HAVE BEEN WARNED !
my working settings:
eSun PLA+
layer height: 0,08
flowrate: 12mm³/s
wall loops: 3
top layers: 4
bottom layers: 4
seam position: aligned
infill: gyroid, 30%
printer: bambulab x1c
Available Sizes:
608 — 8/22/7
609 — 9/24/7
6000 — 10/26/8
6002 — 15/32/9
6004 — 20/42/12
Filename:
Bearing# — inner-Diameter / outer-Diamter / height
example:
608 — 8/22/7 => 8mm hole, 22mm outer diameter, 7mm height