igus WS-10-40 RAIL TRAY ENDCAP
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SIMPLE CAPS TO MAKE IGUS 10-40 RAIL INTO A SMALL TRAY
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I had extra samples of igus 10-40 rail on hand and I figured I'd make a small parts tray. My original intent was for holding heatset inserts, but this will work with screws, nuts, anything small enough to fit. The sample boxes come with a 150mm section of rail so that is what I used for the model.
There are 2 types of end caps. one has a ramp to help grab things in the corner, and the other does not have a ramp if you want a straight wall.
I used #10-32 x ½" socket head cap screws and they are just a little proud of the top of the print once all the slack is tightened down. You could try 3/8" or 7/16" length screws and they may fit better. You could also try M5x10 (might be tight), or M4x10 (might be loose).
I included the design files in case you want to modify these in some way. Happy printing.