igus WS-10-40 RAIL TRAY ENDCAP
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SIMPLE CAPS TO MAKE IGUS 10-40 RAIL INTO A SMALL TRAY
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I had extra samples of igus 10-40 rail on hand and I figured I'd make a small parts tray. My original intent was for holding heatset inserts, but this will work with screws, nuts, anything small enough to fit. The sample boxes come with a 150mm section of rail so that is what I used for the model.
There are 2 types of end caps. one has a ramp to help grab things in the corner, and the other does not have a ramp if you want a straight wall.
I used #10-32 x ½" socket head cap screws and they are just a little proud of the top of the print once all the slack is tightened down. You could try 3/8" or 7/16" length screws and they may fit better. You could also try M5x10 (might be tight), or M4x10 (might be loose).
I included the design files in case you want to modify these in some way. Happy printing.