Counting matching models…
With the bowl in the center a simple but very effective way of sorting those nuts, bolts, washers and other hardware. Update 13/09: Added a version with bottom, so you don't accidentally push out one of the trays if you lift it.
This a 4 x 3 gridfinity base/gauge holder that holds standard 6 unit tall bins and a screw gauge that is 5 mm thick. I use it with this imperial screw gauge and these gridfinity labeled lightweight bins . Allows one to use the gauge with…
Plastic bead sorting trays make it easy to sort and organize your diamond rhinestones for your DIY art and craft projects. The diamond rhinestone plate tray can also be used for diamond painting and nail art dotting, making it a versatile…
Oy! I was looking for a Sorting tray to sort out all my Mtg cards without taking too much space, I found one for catan cards and went to work. •I design the model to accommodate cards without sleeves, its a perfect fit for those! But I…
The “ MES - Gridfinity Bin Holder/Sorting Modules ” are designed around Gridfinity 1x1x6, 2x1x6 and 2x2x6 bins and are for use within the Modular Edge System . The bin holder modules allow for 6U bins to be flush mounted to your table top…
High load capacity and easy printing without support Bearing 1pc 606ZZ Screw 1pc M3x12 Neodymium magnets 6pcs circle 4x4 mm Neodymium magnets 6pcs circle 4x2 mm Box: Printed without support. PETG / layer 0.2 / perimeter 2x / fill 0%…
Trays for sorting small parts is all over the web and not a new invention, but I needed a set with different sizes for different tasks - This is what I ended up with: Different tray sizes for different needs: 50x50mm, 75x75mm, 100x100mm,…
High load capacity and easy printing without support Bearing 1pc 606ZZ Screw 1pc M3x12 Neodymium magnets 3pcs circle 4x4 mm Neodymium magnets 3pcs circle 4x2 mm Box: Printed without support. PETG / layer 0.2 / perimeter 2x / fill 0%…
I want to pre-sort the parts for my Core One kit before I start assembly. Therefore, I copied the components from the assembly instructions into a single document. The parts are sorted by construction steps and also by package. This…
Print with funnel opening facing upwards with support and 8 walls for bedslingers make sure to orient part with the funnel side of the tray towards the front of the plate. (should be slim when looking at part from front of printer) this…
The model includes holes for 5x2mm magnets, mid parts require 4 - 2x5 magnets, and lid or bottom parts require 2 - 2x5 magnets. I included various dimensions and separations to suit your requirements Required Parts: 2mm x 5mm magnets. The…
DE Beschreibung: Eine kleine Schüssel mit 4 Unterteilungen die sich platzsparend stapeln lassen. Geeignet für kleine Schrauben und Kleinteile von Modellbausetze oder Klemmbausteinbausetze. (Nicht nur Lego™!) EN Description: A small tray…
I wanted to design a storage option with easy retrieval and stackability, so I did. Object is 120x120x40mm with 52.5 x 52.5 x 33.5 mm storage areas. Front swoops upwards. Lip helps makes stackable. Left open a section across the front as…
YRRAH Pellet Sorter NOTE: 1 FEB 26 I've added a STL which can be used to print a number of indexes which can be used to replace the bail method of release. The bail is easiest to learn to use. The indexes are fastest to operate and with…
Interlocking hexagonal storage cups for organizing boardgame parts or small items on your desktop/workshop. Following the original model's conventions, I've added 0.25-0.50 mm tolerance versions along with matching testpieces. The design…
A nice sorting tray to sort through your cards as you rip open packs or to sort them however you like. I tried to make it as basic as I could without wasting extra filament. Printed with 5% infill and no supports needed. Short tray is…
Made to fit a standard sorting box. I printed this in PETG with a 0.4 nozzle, 0.25 layer height, STRUCTURAL, 4 vertical perimeters. Print two for each box, and mirror one of them.
This is a parameterised (OpenSCAD) model for creating different specimen sampling trays suitable for sorting invertebrate samples from Malaise traps, pitfalls, soil samples, etc. under a microscope or camera. The size and number of cells,…
2 sorting trays to help keep up with your small blocks when building. one larger holes one smaller. curved bottoms help keep blocks in easy for little fingers or ladies with nails. block plate on top for stacking or decorating. super easy…
We used these jars: www.amazon.de In our kitchen 32 of the single parts fit. If you want you can use the holes on the side to connect them with a pin. We just sticky-taped it to the drawer.
Educational kids shape sorter designed to help children learn basic shapes, colors, and hand–eye coordination through play. This cylindrical sorter features a clean, modern form with multiple shape openings on the top and matching…
the rounded inner edges make it easy to pick up lego blocks, one of the large circles is reserved for collecting the blocks before assembly
Minimalist sorting tray that will print fast and eat up only little filament. 4.5g, 1.5m, 10 minutes
Just small sorting trays of different sizes. They stack one of top of each other. I made regular and long versions. There is also a funnel if you want. If You need any other specific hole size let me know ;) they can be scaled, obviously…
The original link to parametric files no longer appears to be working. Created parametric models for editing.
Add some fun to your workspace with this Coin Sorting Vault Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…
Egal ob LEGO-Set oder Schrankaufbau: Ich brauchte eine Schale für Kleinteile, damit nichts mehr vom Tisch rollt. Hab diese hier entworfen und ich liebe sie, haha! (Es ist mein Erstes Design) 200x200x31 mm 200x200x41 mm 200x200x51 mm…
Summary Simple stackable sorting trays designed for easy and reliable 3D printing. Support-free printing Flat printing orientation Stable stacking system Compact and lightweight design Two tray heights included Details These stackable…
Sortiereinsatz für 1/4" Stecknüsse für Klapp-Werkzeugkiste aus Blech ...................... Sorting insert for 1/4" sockets for folding sheet metal toolbox
Sortiereinsatz für 1/2" Stecknüsse für Klapp-Werkzeugkiste aus Blech. Der Einsatz fädelt in die mittlere Lade ein. Da es viele Werkzeugkisten gibt welche sich in den Abmessungen geringfügig unterscheiden, ist es empfehlenswert, zuerst die…
Sortiereinsatz für 1/2" Stecknüsse für Klapp-Werkzeugkiste aus Blech. Der Einsatz fädelt in die mittlere Lade ein. Da es viele Werkzeugkisten gibt welche sich in den Abmessungen geringfügig unterscheiden, ist es empfehlenswert, zuerst die…
Sortiereinsatz für 3/8" Stecknüsse für Klapp-Werkzeugkiste aus Blech. Der Einsatz fädelt in die mittlere Lade ein. Da es viele Werkzeugkisten gibt welche sich in den Abmessungen geringfügig unterscheiden, ist es empfehlenswert, zuerst die…
Sortiereinsatz für 3/8" Stecknüsse für Klapp-Werkzeugkiste aus Blech. Der Einsatz fädelt in die mittlere Lade ein. Da es viele Werkzeugkisten gibt welche sich in den Abmessungen geringfügig unterscheiden, ist es empfehlenswert, zuerst die…
Dies ist eine Sortierkiste mit Schnappverschluss und verschiedenen Einsätzen. Somit kann die benötigte Fachgröße einfach zusammengestellt werden. Die Einsätze haben eine innere Höhe von 25 mm sowie eine Breite und Länge in einem Rastermaß…
High load capacity and easy printing without support Bearing 1pc 606ZZ Screw 1pc M3x12 Neodymium magnets 4pcs circle 4x4 mm Neodymium magnets 4pcs circle 4x2 mm Box: Printed without support. PETG / layer 0.2 / perimeter 2x / fill 0%…
I wanted a quick way to sort through my most commonly used slingshot ammo. I use 9.5mm or 3/8", 8mm or 5/16", and .177 BB's for practice. These trays allow for quick sorting and take up only a small amount of space. I printed mine with 2…
High load capacity and easy printing without support Bearing 1pc 606ZZ Screw 1pc M3x12 Neodymium magnets 4pcs circle 4x4 mm Neodymium magnets 4pcs circle 4x2 mm Box: Printed without support. PETG / layer 0.2 / perimeter 2x / fill 0%…
High load capacity and easy printing without support Bearing 1pc 606ZZ Screw 1pc M3x12 Neodymium magnets 8pcs circle 4x4 mm Neodymium magnets 8pcs circle 4x2 mm Box: Printed without support. PETG / layer 0.2 / perimeter 2x / fill 0%…
High load capacity and easy printing without support Bearing 1pc 606ZZ Screw 1pc M3x12 Neodymium magnets 9pcs circle 4x4 mm Neodymium magnets 9pcs circle 4x2 mm Box: Printed without support. PETG / layer 0.2 / perimeter 2x / fill 0%…
High load capacity and easy printing without support Bearing 1pc 606ZZ Screw 1pc M3x12 Neodymium magnets 12pcs circle 4x4 mm Neodymium magnets 12pcs circle 4x2 mm Box: Printed without support. PETG / layer 0.2 / perimeter 2x / fill 0%…
Sorting tray for screws, bolts and other fasteners. Easy pickup. Banana not included.
The fordable card sorter is great, but the cover in the original model was too large. I took 10mm out. I printed with 0% infill, no support in PLA.
I wanted to try and coat the downside of a phone holder with some latex to prevent it from sliding around on the table. So i thought the best way would be to just dipp it instead of painting it. I couldnt find anything near to what i need…
Hi everyone! Here is my version of a 3D printed Color Sorting Machine. I took some inspiration from other projects on internet. Special thanks to Michael Cheich for his Arduino course ! Check the machine video here: Check the original…
This is a simple 2x2 gridfinity small part sorting tray - it is setup so it can be stored in a gridfinity system. I personally use it in a Gridfinity Storage Box by Pred, which I used to store all the small size metrics nuts and bolts.…
Stackable trays for sorting stuff. Current design is 280 x 280 x 35mm and 215 x 215 x 35mm - other will by made on request.
This coin-sorter is connected to a storage box with individual trays for each type of coin, all secured behind a vault door. Aside from 3d printed parts, you will need: 5 bearings - 22mm outer diameter, 8mm inner diameter, 7mm high 2…
Everyone knows it, a huge chaos on his table with cables is now a thing of the past. you can attach it with double-sided tape on or under your table to get to your cable at any time. It is designed for cables with a diameter of 4mm. if…
Once I had to mill active carbon and I needed to sort the particles according the size into the groups. Thus I created this. You will most likely need wall size of 0.4 to print the sieve correctly. I thought you might find some OpenSCAD…
Printed in Prusament PLA Blend lime green. New .stl file due to an error in the old one.
I need to sort small parts for my projects. I want to make some trays on-demand and also stackable so they can be easily stored when I finish my project. So I made this sorting tray for my needs. This small parts sorting tray is…
These are sorting trays that I use to keep an overview of the things I need to remove and then build up again
Got a bunch of small parts like screws, bolts, electronic components etc. that needs to be sorted? Dump them in the middle and easily slide them into one of the 8 or 16 compartments.
Magnetic sorting tray with 6 magnetic compartments. It uses 6 15x3mm magnets. I bought the from aliexpress: https://es.aliexpress.com/item/1005005909132326.html?spm=a2g0o.order_list.order_list_main.635.eac7194d3ZXS7r&gatewayAdapt=glo2esp
small sorting Tray for odds and ends in a leaf design. printed with Prusa MK04 PLA supports: Lid yes / only on plate Middle part no PiP Floor yes / only on plate The lid is sliced in two colors, you don't need an MKS for this. Simply wait…
The design has been used with plastic filament spools measuring 195mm (97.5mm radius) and an inner height of 62mm (where the filament is wound). Cut in half we obtain two bases for this project. The containers can be fixed with glue or…
With the bowl in the center a simple but very effective way of sorting those nuts, bolts, washers and other hardware. Update 13/09: Added a version with bottom, so you don't accidentally push out one of the trays if you lift it.
Dies ist meine Version einer Sortierschale. Dieses Design entstammt aus der Idee viele Kleinteile auf einmal ordentlich in einer Hand transportieren zu können.
Has your desk ever been so cluttered you can't move anything without knocking something off? Have you ever wanted to put a hundred items in an impossibly small area? Then this is the organizer for you!! I used this for my desk and the…
You can feed the nuts from the hole in the box. Shaking it they will be filtered in the right drawer. Works for M5,M4 and M3 nuts.
Summary This is a makers sorting tray for screws, springs and other knicknacks, it is split into segments with low barriers that allow sorting but still allow easy pouring. Instructions I printed this at 5 percent infill with supports…
Quickly separate and sort your metric hex nuts using this set of stackable trays. The set is even Gridfinity compatible! This design uses angled slots to allow the hex nuts to fall through faster and with less shaking than using circular…
Basic sorting tray, could be used as a jewelry tray or a place to put your cell phone, wallet, keys, etc.
Some basic sorting trays (4+1) with an organic shape that nest nicely together.
Bei diesen Boxen hast Du die Wahl, wie viele Böden Du benötigst und wie diese angeordnet werden sollen. Auch die Farbgestaltung bleibt natürlich Dir überlassen.
How to print: Standard settings Can be printed in PLA or PETG Draft (was good for me) Used fond: https://www.1001fonts.com/tgl-font.html
I was very inspired by the model from Martin_au . However, I needed to sort several screws at once, and most of all, I missed the possibility of finding out which screw or nut it actually is, so that I don't have to keep reaching for the…
This Model allows you to: separate up to four different fractions in parallel dump the fractions individually in some other container without losing the separations
As I'm working on quite a lot of Eurorack (modular synth) modules, I needed a solution to sort the components I'll need to solder. Small switches, LEDs, transistors, ICs etc. fit the small compartments perfectly. Resistors, diodes and…
This gridfinity sorting tray lets you sort that catch-all overflowing with random screws and nuts and whatnot directly into their bins! No need to precariously tip or dump: slide them directly into their final receptacles. If you don't…
The basic size fits Prusa Mini, but feel free to scale it as you need! :) I used basic settings, layer height 0,28 mm.
Octagon Sorting Tray (Vase Mode) This Sorting Tray uses a minimal amount of material and can be reduced in scale if desired. It was inspired by one of my pervious models “ Paperclip Container & Cover ” where I tried to make a container…
All trays shown here were printed on a Prusa XL using Prusament filament.
Tray to keep hard drives organized without generating heat due to enclosure. For 2.5' hard drives and SSD drives
Working station with sorting tray and tool holder with the dimensions of 235x235 mm it fits perfectly on the build plate of many printers the 10 sorting compartments help to keep the individual components seperate with the tool holder,…
For puzzle enthusiasts and makers alike, our free STL file is a game-changer. Create a personalized puzzle sorter that fits your style and needs. This 3D-printable design offers a practical solution for keeping your puzzle pieces…
This is Easy Sorting Tray designed for "Prusa Flash Contest". Main Features: 8 detachable containers. Easy sorting slope. Compatible with small printers. No supports. Fully scalable. Commercial use: To sell prints of this and my other…
Elegant geometric sorting tray / holder Hight of each section - 3,4 cm - 6,1 cm - 4,5 cm 0,2 layerhight on example. Change z-hight in slicer if u want the sections higher. Print Settings Supports: No Resolution: 100% Infill: 100% or 3-4…
Square Sorting Tray (Vase Mode) This Sorting Tray uses a minimal amount of material and can be reduced in scale if desired. It was inspired by one of my pervious models “ Paperclip Container & Cover ” & “ Octagon Sorting Tray (Vase Mode)…
Now it's time to organize those messy nuts and bolts with just one "shake"! I designed it for M2
Keep your jigsaw puzzle pieces sorted and organized with this tray. Print as many trays as needed, connect them together and stack them with your sorted jigsaw puzzle pieces and put them away when you need the space. This tray may be…
A simple but effective sorting plate with a central well and 7 different boxes where to drag small parts.
A basic sorting tray that allows you to sort and then pour its contents into a container of your choice. It's design also means it can be stacked onto one another if you wish to print multiples. Print with what ever material and settings…
This a 4 x 3 gridfinity base/gauge holder that holds standard 6 unit tall bins and a screw gauge that is 5 mm thick. I use it with this imperial screw gauge and these gridfinity labeled lightweight bins . Allows one to use the gauge with…
Square Sorting Tray v2 (Vase Mode) This Sorting Tray uses a minimal amount of material and can be reduced in scale if desired. It was inspired by one of my pervious models “ Paperclip Container & Cover ”, “ Octagon Sorting Tray (Vase…
Just print and add a few types of beads. The children have the task of using tweezers to sort the beads according to color or size. Develops motor skills For children from two years print on its side for a better surface Added version 2…
Plastic bead sorting trays make it easy to sort and organize your diamond rhinestones for your DIY art and craft projects. The diamond rhinestone plate tray can also be used for diamond painting and nail art dotting, making it a versatile…
Intended for the hobby electronics builder, these trays organize the parts used in most electronics projects so that when soldering, you can just grab the part and solder it rather than searching through a pile of parts. Each slot type is…
