1 / 3
Standard T8 8mm pitch to TR8 1.5mm pitch IGUS leadscrew adapter — zdjęcie 1
1 / 3

Standard T8 8mm pitch to TR8 1.5mm pitch IGUS leadscrew adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ok, the thing name is pretty long, but it actually describes what this thing is, so... ...here is my adapter to use…

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
435
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Ok, the thing name is pretty long, but it actually describes what this thing is, so...

...here is my adapter to use TR8 1.5mm pitch leadscrews (https://www.dold-mechatronik.de/TR-Spindeln-8x15) with the standard IGUS (https://www.dold-mechatronik.de/Kunststoff-Flanschmutter) nuts instead of theshtty chinese T8 8mm pitch leadscrews with more shtty brass nuts.

The IGUS nuts are really high quality and don't need any anti-backslash chinese low quality nuts.

You need to saw, or better, sand down (with electric sander for your convenience) the IGUS nuts to the form of the template attached in this thing.

Furthermore you need:

ATTENTION:

  • Recalculate your Z steps, the stepper needs to spin much faster because of the 8mm to 1.5mm pitch "upgrade".
  • Print the stepper relocator!

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.2mm

Infill:

at least 40%

Filament: M4P PLA Grey


Notes:

At least 40% infill WITH a high quality infill in Cura, like cubic or something like this.
I wouldn't go with 100% infill to let the part work a little bit (there is no leadscrew that is 100% straight ;))

Category: 3D Printer Parts

Tagi