SV06/+ Double Sheared and Sturdier Y Bracket - Offset For 48mm NEMA17
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"Double Sheared" (supported stepper shaft) Y bracket for the SV06/+ for higher Y belt tensions, up to 48mm NEMA17.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
REQUIRES CWT EXPERIMENTAL +10MM Y PARTS BELOW FOR 48MM STEPPERS, BEARING BRACKETS ARE GOOD FOR STABILITY TOO:
https://www.printables.com/model/727854-sovol-sv-06-reinforced-y-axis-components-7mm-eleva/files
A "Double Sheared" (bearing supported stepper shaft) Y bracket for the SV06/+ for higher Y belt tensions, offset from the rear metal for 48mm steppers.
You must remove the rear plastic from the frame to use this mod.
No heat inserts required.
It's a little ugly so feel free to remix.
Lazy BOM:
M3 SHCS 26mm (30mm if you ran out and have to use a nut and washer on each like I have) *3 to mount stepper
M4 ANY 16-18mm *3 to mount to metal
F695ZZ Flanged Bearing *1 to push into Y Motor Fixing Plate.step