P
PrintablesPaescu91
Gitter Abdeckung Schrank Ø48mm
Kann z.B. in Stallschränken eingebaut werden, damit die Mäuse nicht durch die Lüftungsbohrungen in den Schrank gelangen.
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
Wyniki wyszukiwania: 48mm
Liczymy pasujące modele…
P
PrintablesDusan Fajler
Bird Feeder for a bottle (48mm and 28mm threads)
There's a model for a 48mm thread (usually from European 5-6l bottles) and for a 28mm thread (ex. Coca Cola bottle). Using a 48mm thread is recommended because the seeds don't get stuck Poke a small hole in the center at the bottom of the…
- Pobrania
- 3029
- Polubienia
- 970
- Ocena
- 4,77
P
Printablessometimes_erik
Fork Seal Driver Tool - KTM/Husky/GasGas (48mm)
--Updated V2 Available Now!-- Features 3mm alignment pins and better clearance! Use standard nails as alignment pins for more consistent driving. This is a fork seal driving tool for use with 48mm diameter dirt bike forks. This was…
- Pobrania
- 1352
- Polubienia
- 116
- Ocena
- 5
P
PrintablesCharleszard
Self-Centering 48mm Chuck for Mini Lathe
Originally made for cheap tiny lathes like those sold on Amazon ( like so ). Remixed from mdkendall's excellent design that provided the basis for this smaller version. Thanks mdkendall! This version mini-fies the design to: work within…
- Pobrania
- 1185
- Polubienia
- 158
- Ocena
- 5
P
PrintablesStriK3FoRC3
Portal Cube Edited, Remixed, now 50% size! (48mm)
Original Creator: https://www.thingiverse.com/thing:3388750 (All files are already in 50% Size!) i edited the original cube so you can print it in 50% Size and made some small improvements like: Logo looks more like the original. Added…
- Pobrania
- 313
- Polubienia
- 120
- Ocena
- 5
P
PrintablesRobin
Ostmann Spice Shelf (for Ø 48mm Containers)
Small Shelf for a better organization of your Spice inventory. 2-5 Containers per Print. Print instructions I recommend using Food safe Materials, like PLA or PETG. Use 3mm countersunk head screws for mounting. Print tested in PETG
- Pobrania
- 290
- Polubienia
- 43
- Ocena
- 4,8
P
PrintablesChristoph Streek
Eckverbinder für Holzlatten 24mm x 48mm
Eckverbindungen für Konstruktionslatten 24mm x 48mm Größe: 80mm x 82mm x 55,5 mm (BxLxH) Jeweils eine Rechte und eine Linke Eckverbindung
- Pobrania
- 252
- Polubienia
- 38
- Ocena
- 0
P
Printablesalexan_e
Round Metric Screw Measuring Tool (M2-M6, up to 48mm)
A round shaped screw measuring tool in a diameter of 50mm with 6mm height to fit in a pocket with a capability to identify M2, M2.5, M3, M4, M5, M6 screws and measure screw lengths up to 48mm. I have used PLA, 0.2mm layer height, 10%…
- Pobrania
- 193
- Polubienia
- 24
- Ocena
- 5
P
Printablesmbe075
RC tyres OD85mm=3.3" ID48mm=1.9" W28mm=1.1"
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
- Pobrania
- 153
- Polubienia
- 23
- Ocena
- 0
P
PrintablesPavlo Kotula
48mm Pastamatic Leadscrew
This is a remixed model designed for smaller spools with a width of 48mm. I have smaller spools myself, so I had to modify the original design to fit my needs. This version might also be useful for others who have similar spool sizes and…
- Pobrania
- 150
- Polubienia
- 16
- Ocena
- 5
P
Printablesthall72
Lego Compatible (18744.dat) Minifig Utensil Ski 6L (48mm Long)
This model is compatible with the lego system.
- Pobrania
- 135
- Polubienia
- 18
- Ocena
- 5
P
Printablesangel618
Wasser Flaschen Trockner 48mm für SIGG Flaschen oder ähnlich - Bottle Dryer Bottledryer
Flaschen Trockner für SIGG Getränke Flaschen passend. Ohne irgendwelche Schrägen so steht die Flasche sicher ohne zu kippen. Gedruckt in PETG - weiss - keine Supports nötig - Infill 15% oder 20%
- Pobrania
- 127
- Polubienia
- 5
- Ocena
- 0
P
PrintablesAlex Just Alex
Otto Mecanum: 48mm mecanum wheel servo adaptor
The print in place mecanum wheels were ok, but suffered from the use of PLA for the rollers, which really limited the surfaces that they functioned properly on. I did consider a new self assembly wheel with TPU rollers but discovered that…
- Pobrania
- 118
- Polubienia
- 24
- Ocena
- 0
P
PrintablesParagon
A set of holders, for a wooden fence, for a 48mm post
Zestaw uchwytów do mocowania ogrodzenia drewnianego na słupku Fi 48mm... XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX A set of brackets, for fixing a wooden fence on a post Fi 48mm ... - Jeżeli chciałbyś zapoznać się z tym co robię na…
- Pobrania
- 117
- Polubienia
- 34
- Ocena
- 5
P
Printablesmbe075
RC tyres OD85mm=3.3" ID48mm=1.9" W38mm=1.5"
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
- Pobrania
- 115
- Polubienia
- 15
- Ocena
- 0
P
PrintablesBladepianist
Ender-3 S1 3-Point Bed Carriage 48mm Y Stepper
Update 20240123 : Added V2 revisions of both designs for Ender-3 S1 compatibility (175x170mm). This new version is retrocompatible with 170x170 beds. Refer to Gulfcoast Robotics' amazing explanation . V1 is only compatible with 170x170mm…
- Pobrania
- 107
- Polubienia
- 10
- Ocena
- 0
P
PrintablesReece Neff
Nema 17 48mm Stepper Motor Vertical Mount
Modified the original 40mm design of cndewil and extended it to support the taller 48mm nema 17 stepper motor variety.
- Pobrania
- 106
- Polubienia
- 4
- Ocena
- 1
P
PrintablesKimframes
Photo frames, 148mm x 100mm (second edition)
Can be printed with 0.4 or 0.6 nozzle. Recommended to have infill of 10% or more.
- Pobrania
- 103
- Polubienia
- 22
- Ocena
- 5
P
PrintablesMAKERTEAM®
MT-SYSTEM Holder M: Cordless Screwdriver Holder 48mm for BOSCH 12V etc. (Akkuschrauber-Halter)
If you want to have your cordless screwdriver, impact wrench, electric drill or whatever right in place you can have it with one of these holders (125mm baseplate). The center hole is sloped by 5° to the user to make the handling more…
- Pobrania
- 102
- Polubienia
- 12
- Ocena
- 0
P
PrintablesBLMaker20
Arrma Rear Lower Suspension Arma 148MM (ARA330654) | 3D Scanned
I 3D scanned this Arrma part and edited the holes a bit so it's printable. It is a little bit rough on the surface. The printed one is on the left. It fits without any problems, screw holes are a bit tight but it won't strip your screw…
- Pobrania
- 101
- Polubienia
- 20
- Ocena
- 0
P
PrintablesSixpack99
Ender 3 S1 Bed Frame 48mm Y Stepper
This remix makes room for a 48mm Y axis stepper motor. I did test print it at 5mm thick with ASA and it worked, but tigtening the bedscrews will bend the corners upward. It needs to be made out of aluminum. I used https://sendcutsend.com/…
- Pobrania
- 98
- Polubienia
- 20
- Ocena
- 0
P
PrintablesMatt Voska
Zemismart Roller Blind Motor Adapter for 48mm Tube
I printed with 10 wall lines and 100% infill. I have a hefty blind, so I don't want to take any chances. For the freewheeling tube plug, I used the included metal axle with a standard skateboard bearing. I used these ones, but any…
- Pobrania
- 95
- Polubienia
- 3
- Ocena
- 0
P
Printablesmbe075
RC tyres OD85mm=3.3" ID48mm=1.9" W 20mm=0.8"
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
- Pobrania
- 91
- Polubienia
- 9
- Ocena
- 0
P
PrintablesRiley Price
48mm Coffee tamper
I didn't have a tamper and needed one. This seems to work perfectly with just a little bit of room at the sides for relief. Message me if you have any questions! Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
- Pobrania
- 82
- Polubienia
- 8
- Ocena
- 5
P
Printablesvervurax
Extended stepper cooler bodies (for 48mm motors) - E3NG 1.2
Extended cooler bodies for 48mm stepper motors.
- Pobrania
- 78
- Polubienia
- 30
- Ocena
- 5
P
PrintablesClac
Nema17 2.5A 48mm stepper motor
A precise model of the Nema17 2.5A 48mm stepper motor I made NOT for printing, this models parts are not joined together and could cause a very weak print! Category: 3D Printing
- Pobrania
- 71
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMchapman121
48mm fork driving tool confirmed to work on Kawasaki. Should work on KTM, Husky, KYB, GasGas as well
I printed this tool with 50% fill and it worked great.
- Pobrania
- 70
- Polubienia
- 9
- Ocena
- 0
P
Printablescaveduck
Ring light for stereo microscope with 48mm thread, Olympus and others
This is an Arduino-controlled ring light for stereo microscopes with a 48x0.75mm threaded nose piece. This is one of the most common sizes and fits my vintage Olympus unit. Other thread sizes for which commercial ringlight adapters are…
- Pobrania
- 69
- Polubienia
- 10
- Ocena
- 0
P
PrintablesHatti
Geschenkspapier Wandhalter 48mm
Geschenkspapier Wandhalter mit 4 Löcher (jeweils 48mm) für offenes Geschenkspapier. Hier kann auch geöffnetes Geschenkspapier aufbewahrt werden.
- Pobrania
- 59
- Polubienia
- 9
- Ocena
- 5
P
PrintablesBunkerotter
Minimalist Picture Frame for 100x148mm 4x6 Pictures
A very minimalistic picture frame for 4x6 (100x148mm) pictures. It has multiple mounting holes for pins or nails, depending on if you want to mount it portrait, landscape, at a slight tilt, as a chain, etc. The Frame uses barely any…
- Pobrania
- 57
- Polubienia
- 2
- Ocena
- 0
P
PrintablesOeschMe
Cap for Tekno Wheels (48mm hole, blank)
My cars' winter tyres where fitted on Tekno Wheels rims, and the center hole caps were in really bad shape, so I made these. These fit 48mm center hole. Scaling on XY might allow you to fit them on other hole sizes too. STL is just plain…
- Pobrania
- 51
- Polubienia
- 2
- Ocena
- 0
P
PrintablesOcho Camino
KYB 48mm Fork Shock Adjuster
A simple tool which uses a slotted ¼" hex bit to adjust the compression clickers on a 48mm KYB shock - Adjusting them using a screwdriver is often difficult because the bars are in the way. There are 2 models here, 1 for standard 25mm…
- Pobrania
- 47
- Polubienia
- 4
- Ocena
- 0
P
PrintablesNKTechnical
48mm Hood for W-Nikkor 3.5cm f/1.8 Nikon S Rangefinder Lens
Information This is a lens hood for the W-Nikkor 3.5cm f/1.8 rangefinder lens (in Nikon S mount). It should also fit on the rare third version of the 3.5cm f/2.5. It uses a M48 X 0.5 filter thread. "Why does it have all those holes?" On…
- Pobrania
- 47
- Polubienia
- 6
- Ocena
- 0
P
Printablesherbert
48mm spool adapter (lead screw and spacer) for PASTA lite respooler
This is a remixed model designed for smaller spools with a width of 48mm. I have smaller spools myself, so I had to modify the original design to fit my needs. This version might also be useful for others who have similar spool sizes and…
- Pobrania
- 44
- Polubienia
- 4
- Ocena
- 4
P
PrintablesBeaver
Binocular Lens Caps 48mm & 38mm OD for flexible filament
Lens caps for binoculars with 48mm & 38mm outer diameter lenses. The 38mm cap is designed to be looped through a strap m
- Pobrania
- 43
- Polubienia
- 9
- Ocena
- 0
P
PrintablesShane D
LM2596 Buck Converter Box 48mmX23mm
This is a box for a LM2596 converter whose board measures 48mm X 23mm. A quick way to tell if this one will work for you is if by the output positive there are 4 pads arranged in a square. I made this after I realized that not all…
- Pobrania
- 41
- Polubienia
- 5
- Ocena
- 0
P
Printablesalkeryn
Guitar Wall Mount, VHB tape, 48mm version remix
i thought i'd need to make the base wider for more surface area but turns out it is plenty big enough, i covered the whole surface with pattex double adhesive, i think 3M VHB would work just as well. electric guitar has been attached for…
- Pobrania
- 39
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCary C
Ikea Skadis Hand Vacuum and Air Duster Holder (48mm)
I created this Ikea Skadis compatible vacuum and duster holder as I was sick of my hand vacuum laying around. I use it to suck out all the strings and bits and bobs out of my printer, it's a very handy tool to have around. Also use it to…
- Pobrania
- 37
- Polubienia
- 8
- Ocena
- 0
P
PrintablesDouglas Calabrese
48mm Cubicle Wall Hook
From the original upload: A simple hook for a cubicle wall with 48mm wide tops. Added some curves and angles for strength and smoothness.
- Pobrania
- 36
- Polubienia
- 9
- Ocena
- 0
P
Printablesjackharvest
Starlink Satellite Gen2 (Generation 2) 48mm (1.89in) Chain Link Fence Post Adapter
Please note, this doesn't have the lock mechanism (it would be pretty easy to add, just haven't done it yet cause I was too excited to get this up and running, lol). The weight of the Satellite should be plenty to keep in place for now. I…
- Pobrania
- 35
- Polubienia
- 9
- Ocena
- 0
P
Printablesormstont
48mm Mast Cap (bayonet fit) for ADS-B Radome Ground Plane Antenna
The ADS-B radome by markend is a brilliant design - looks really smart and fits really nicely with no soldering necessary to fit everything together. My only issue with it was the mount, which I wanted to modify so that it would fit on…
- Pobrania
- 34
- Polubienia
- 7
- Ocena
- 0
P
PrintablesPHabermehl
Wohnwagen Dachluken Fliegengitter Reparatur Spannrahmen 248x248mm
Bei unserer Bad-Dachluke war das Fliegengitter gerissen. Ich habe die Gitter-Reste entfernt und einen Spannrahmen gedruckt, der in den originalen Träger passt. Die Maße des Rahmens sind 248x248mm mit zwei abgeschrägten Ecken und einer…
- Pobrania
- 30
- Polubienia
- 5
- Ocena
- 0
P
PrintablesTurbopstros
Reinforced Balcony Door Handle (43mm and 48mm Holes Spacing)
The handle for the balcony door is mounted on the outside of the balcony door. It can also be used on terrace door, door screens and similar applications. The holes spacing is 43 mm and 48 mm. The hole diameter is 4.6 mm. Add a small drop…
- Pobrania
- 29
- Polubienia
- 6
- Ocena
- 0
P
PrintablesHaulien
Traxxas Rustler 4x4 VXL - 48mm battery strap
This is a replacement battery hold-down for the Traxxas Rustler 4x4 VXL, to fit 48mm tall batteries. I'm modifying my Rustler to support 4S, and the batteries I've chosen are suited for being used in an xmaxx, so they're tall bois. It's…
- Pobrania
- 29
- Polubienia
- 5
- Ocena
- 0
P
PrintablesTWWlaser
Stand for squared timber 24x48mm
English description (German description below) Stand for squared timber - The dimensions of the squared timber are 24x48mm. - Two versions available: High (55mm mounting) and Low (40mm mounting). - The bottom of the low version is open,…
- Pobrania
- 27
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDarthKaker
WP 48mm Fork cover from KTM 990 Adventure
The covers were printed from TPU95, filling 100%. Added cutouts to fit standard 5mm wide zip ties. Shields fit any fork whose outside diameter is about 57mm.
- Pobrania
- 27
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSnarky
7-Day 88mm x 48mm Pill Bottle Insert (daily or am/pm)
7-day insert for 88mm x 48mm pill bottle, as used by HyVee and other pharmacy chains. I use these for daily doses, but also made an AM/PM variant for those who take pills twice a day. This version has slots in the bottom nthat act as a…
- Pobrania
- 26
- Polubienia
- 9
- Ocena
- 0
P
PrintablesMichal Molcany
Slim 48mm uPVC Balcony Pull Tab
Overview A clean, minimalist replacement for the standard plastic "pull tabs" on balcony and patio doors. This model specifically features the common 48mm screw hole spacing (center-to-center), making it a drop-in replacement for the…
- Pobrania
- 25
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMarkus
Ring Light adapter for microscopes (48mm thread)
This is an adapter to attach ring lights to microscopes that do not have a groove to hold on to. It screws into the thread that is usually meant for attaching barlow lenses, a 48mm (x 1mm pitch?) thread in this case. The adapter extends a…
- Pobrania
- 24
- Polubienia
- 3
- Ocena
- 0
P
Printablesqwerty
Amphibious Tires - for 1.9" / 48mm Rims
I started this project as an addition for my XRP Offroad mod that can also be seen in the rendered picture to make it ready for the water and you're not limited to the XRP Boat Mod anymore. And in theory this would also work, but that…
- Pobrania
- 22
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDienes Alex
SV06 y axis 48mm stepper adapter
No inserts are needed, use original screws. You will need extra 4pcs of M4x15mm screws at least. you could go longer than 15mm. No supports, 0.2, as much infill as possible. thick walls. PS. Zip ties in the pictures are not needed at all.…
- Pobrania
- 20
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEd
48mm Organizer Cubes
1x1 bins for AIRTOON toolbox / organizer. May also fit other branded toolboxes with 48mm bins NOTE - the feet on the bottom of the cubes are required to keep things from sliding around when the organizer lid is closed. The bottom of the…
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJP
air hose connectors 148mm-120mm wich can be screwed in
133mm-120,5mm connector 148mm-120,5mm connector counterhold designed with M4 inserts inmind I designt these to connect air hoses with a flage.
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
PrintablesTheo
Tachohalter Mofa Ø48mm
Tachohalterung für Mofa/Töffli (Puch, Hercules, Sachs, Kreidler, DKW etc.) Halterung für Nachbauscheinwerfer für Mofa
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 0
P
Printablesxyzroe
120Ah LiFePO4 Battery Cell Holder & Spacer (174mm x 48mm)
Building a DIY battery bank requires precision and safety. These spacers are designed to securely hold 3.2V 120Ah LiFePO4 cells , ensuring they remain perfectly aligned for busbar installation while providing structural integrity to your…
- Pobrania
- 16
- Polubienia
- 3
- Ocena
- 0
P
PrintablesClaudiu Gîlmeanu
Bios: Megafauna 2nd Ed. Insert (Remix + Width 148mm)
This is the Bios: Megafauna boardgame insert, remixed with the width fixed to fit the second edition of the game box which is 148mm wide. Print Settings Printer Brand: Prusa Rafts: No **Resolution:** 0.2 Infill: 10%, Adaptive Cubic Notes:…
- Pobrania
- 15
- Polubienia
- 5
- Ocena
- 3
P
PrintablesWolfEntchtein
Darkroom 105x148mm Easel
This is my first project here. For those who are tired of struggling with adjustable easel, I've created this project for better repeatability, ease and timesaving while printing little postcards in the darkroom. This easel is designed to…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
Printablesyako000
48mm motor mount for coreception
I created this motor mount for the creativity elf/coreception 300 to mount 48mm steppers without major modifications. print in a high temp filament that will not creep (ex: abs,asa,pc,other.) I printed mine in push plastics CF PC+PBT but…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 4
P
Printableskoudja
Koudelinek foto kryt na objektiv 48mm
Koudelinek_kryt_48mm_objektiv
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDrewDeeDoo
Fat Tire to Mountain Bike boost 148mm axle brake adapters
Made these adapters to convert a fat tire bike (197mm) frame to 148mm rear boost hub. -Print in PPA-CF for strength. -No supports needed -Do not attempt this unless you are a mechanic -Replace brake disc bolts with M5 x 40mm bolts…
- Pobrania
- 14
- Polubienia
- 5
- Ocena
- 0
P
Printablespemlik
Eheim Twin Duo Adapter 48mm
Eheim Twin Duo Adapter 48mm Category: Hobby
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesYamzi
SV06/+ Double Sheared and Sturdier Y Bracket - Offset For 48mm NEMA17
REQUIRES CWT EXPERIMENTAL +10MM Y PARTS BELOW FOR 48MM STEPPERS, BEARING BRACKETS ARE GOOD FOR STABILITY TOO: https://www.printables.com/model/727854-sovol-sv-06-reinforced-y-axis-components-7mm-eleva/files A "Double Sheared" (bearing…
- Pobrania
- 12
- Polubienia
- 3
- Ocena
- 0
P
Printablesdjos_1475
GX16 Connector Housing for 48mm NEMA 17 Stepper Motors
Just a simple housing for adding GX16 Aviation style connectors to hard-wired 48mm NEMA 17 stepper motors. I didnt want to add height to my motors, and this style worked best for my CNC machine. Update - 02/12/25 : Added a version that…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
PrintablesGoldenBoyGarage
Steering Stem Bearing Install Tool 30mm (ID) x 48mm (OD) Kawasaki H1 H2 KH KZ
Printing More walls are better, At least 3. Probably will work will work with PLA, but might be junk after. PETG will also work great, but I recommend not using a metal hammer as it can shatter sometimes. I used 3 walls and 30% Infill…
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJulius3E8
19mm Coat Hook Spacer for 48mm Cubicle Wall
What a great time to be alive! Fuzzy little work spaces for us to live in and earn our keep on a daily basis... ample coffee day and night. sigh ... good times. Oh, and if your cubicle wall is 48mm thick and the coat hook that is supposed…
- Pobrania
- 11
- Polubienia
- 3
- Ocena
- 0
P
Printablesjames23
Silicone Wire Spool (48mm dia x 34mm wide) Holder
This is a 5-slot spool holder for Silicone-insulated wire spools 48mm in diameter and 34mm wide. The spools snap in place with a slot for the wire to exit near the top front. Printed in PLA. I printed at a 45 degree angle (with brim &…
- Pobrania
- 10
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDORLOCK
IKEA OFTAST Bowl Holder - Height 5cm, Diameter 15cm (exactly 148mm)
IKEA OFTAST Bowl Holder - Height 5cm, Diameter 15cm (exactly 148mm) I created this bowl holder because our old cat doesn't have many teeth left, and when he licks kibble and food from his bowl, there used to be a mess around the feeding…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDaniel
DoorHandle with 48mm spacing
FreeCAD file included. I printed it in ASA as this is exposed to sunlight and the elements in my case. Warning: Beware of the spacing to your individual shutters as this is quite a bit larger than the original one.
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesGerWa61
Batterie AA Zellen- Stabgehäuse Pro K_Klotz Stab 24mm*24mm*48mm mit 16mm Bohrungen
Mit diesem Stabsystem können Sie Batterie-Akku Zellen TypAA aufbewahren oder verschalten paralleloder Seriell!
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMike Ratcliffe
Eschenbach 33213 Microscope 48mm Barlow Lens Adapter
This adapter was designed for the Eschenbach 33213 microscope , allowing standard 48mm Barlow lenses to be used in place of the original proprietary Eschenbach accessories. The factory microscope uses a ribbed push-fit mount for Barlow…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFoil Kiter
Schutzblech-Halter 42-48mm
Die Originalhalterung an meinem Fahrrad war gebrochen. Deshalb habe ich es nachkonstruiert und in PETG gedruckt. Beim Drucken sollte 100% infill verwendet werden und die Lasche auf der Druckplatte aufliegen.
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJeyTee
Balcony door handle, holes 48mm apart
Balcony door handle, holes 48mm apart Plugs can be printed without supports, just upside down. Print setting: Material: PET-G or other UV stable material(preferrably ASA) Perimeters: 6 Support material: Yes, Organic, Use support blocker…
- Pobrania
- 1
- Polubienia
- 2
- Ocena
- 0
P
Printables
Reinforced Balcony Door Handle (43mm and 48mm Holes Spacing)
The handle for the balcony door is mounted on the outside of the balcony door. It can also be used on terrace door, door screens and similar applications. The holes spacing is 43 mm and 48 mm. The hole diameter is 4.6 mm. Add a small drop…
P
Printables
IKEA OFTAST Bowl Holder - Height 5cm, Diameter 15cm (exactly 148mm)
IKEA OFTAST Bowl Holder - Height 5cm, Diameter 15cm (exactly 148mm) I created this bowl holder because our old cat doesn't have many teeth left, and when he licks kibble and food from his bowl, there used to be a mess around the feeding…
P
Printables
DoorHandle with 48mm spacing
FreeCAD file included. I printed it in ASA as this is exposed to sunlight and the elements in my case. Warning: Beware of the spacing to your individual shutters as this is quite a bit larger than the original one.
P
Printables
Darkroom 105x148mm Easel
This is my first project here. For those who are tired of struggling with adjustable easel, I've created this project for better repeatability, ease and timesaving while printing little postcards in the darkroom. This easel is designed to…
P
Printables
48mm PET bottle adapter for water dispenser
The original cap has been adapted to a specific model I found on temu. You can see the model in one of the pictures. If you wish to make changes to suite your own dispenser, here is a link to the Onshape document:…
P
Printables
48mm spool adapter (lead screw and spacer) for PASTA lite respooler
This is a remixed model designed for smaller spools with a width of 48mm. I have smaller spools myself, so I had to modify the original design to fit my needs. This version might also be useful for others who have similar spool sizes and…
P
Printables
Slim 48mm uPVC Balcony Pull Tab
Overview A clean, minimalist replacement for the standard plastic "pull tabs" on balcony and patio doors. This model specifically features the common 48mm screw hole spacing (center-to-center), making it a drop-in replacement for the…
P
Printables
LM2596 Buck Converter Box 48mmX23mm
This is a box for a LM2596 converter whose board measures 48mm X 23mm. A quick way to tell if this one will work for you is if by the output positive there are 4 pads arranged in a square. I made this after I realized that not all…
P
Printables
.30 Thompson Center/7.62x48mm Cartridge
Model of the .30 Thompson Center cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be…
P
Printables
48mm roll holder with locking mechanism
this roll holder is meant to be glued with 19mm double sided tap
P
Printables
Pipe tool holder 48mm
Držák pro připevnění na trubku průměru 48mm po vytisknutí 1. části je třeba udělat závit M6 pro uchycovací šrouby
P
Printables
Saw Horse Jig for 24mmx48mm boards
For making a saw horse from 24x48mm boards. I included a small tolerance test file to print out and make sure the scale will work with your boards.
P
Printables
48mm/1717 Motor Mount for X-Maxx
Motor mount for Traxxas X-Maxx, designed for a Castle 1717 series 48mm motor. Includes a version with an integrated fan mount and one without, and a 1mm spacer that can be used to shim the mount to fit larger gears. Without shimming, it…
P
Printables
8mm Gympin remix 148mm
8mm version, havent tested it yet. Is probably not as rigid as the 100m one.
P
Printables
kitchen cabinet door hinge 48mm to 45 mm hole conversion jig
my kitchen door hinges are failing. the new hinge i got has different hole patern on the door side. I don't want to modify the door, so i made the jig to modify the hinges to use the existing holes on the door. (hinges are cheaper than…
P
Printables
Power Extension Cable Gland - Suit 7mm & 9mm Cables with 48mm Plug/Sockets
This set of parts was developed to allow an extension cable to be temporarily passed through a sheet metal floor of a stealth camper van when parked up on site power and removed for transit, whilst retaining some kind of seal to the…
P
Printables
TOMLOV microscope adapter for standard arm & 48mm Ring Led Light
There is a lot of cheap and stable arms for microscopes, like Relife one. These is an adapter for arms with tube diameter 31.8mm, as the source file is included you can mod it for other diameters. Because there is play between the arm…
P
Printables
Simple Photo Frame for 100x148mm Prints (No Supports)
This minimalist photo frame is designed for 100x148mm prints (like Canon Selphy photo paper). Prints in just 1.5 hours (Prusa XL, no supports) Ultra-light, low-material design to keep costs and waste down Includes stand for portrait and…
P
Printables
Hair Dryer Nozzle for Revlon or other 48mm nozzle dryers
Printing Instructions Filament Material Advised PETG/PET/ASA Material Propaties Required Property Type Constancy Hard Durablity Not brittle Sun Bleaching Protection depends on use case but would advise for long term use not using PLA Heat…
P
Printables
Spool silica gel insert diameter 48mm length 50-70mm
Spool silica gel insert for CFS, AMS and other Diameter 48mm for spools with narrow hole Length 50-70mm for wide or narrow spools Print settings 0.2 mm layer 3 walls 25% gyroid infill No supports
P
Printables
Dust Collection Hose Adapter 54mm OD to 48mm ID
Dust collector adapter for a hose to a Mullet Tools cyclone
P
Printables
48mm Hood for Nikkor 8.5cm f/2 Nikon Rangefinder Lens
The Nikkor P 8.5cm f/2 is one of the lenses that put Nikon on the map, but it came about when filter sizes were less standardized. It's really hard to find 48mm-sized step up rings and filters, and the ones that exist today usually have a…
P
Printables
48mm PET bottle adapter for water dispenser
The original cap has been adapted to a specific model I found on temu. You can see the model in one of the pictures. If you wish to make changes to suite your own dispenser, here is a link to the Onshape document:…
P
Printables
EOS R Drop In Filters / 48mm (2in) Filters
Holder is sized to accept Baader 2in filters which measure 1.87in and uses a retaining ring that can be glued in. Will also work with smaller sized filters like ones by Lumicon and others at 1.767in and uses another retaining ring with a…
P
Printables
Ring light Lens Adapter - Ring 48mm / Lens 36 mm
Print in ABS or ASA, theese lights get fairly hot. Cheap plastic lens ~ 36 mm or adapt it. The light, and yeah, it's the crappy one ~ 10 €. Which is a awesome great product for the price. Search it by yourself "Retoo LED Ring Light with…