1 / 10
GX16 Connector Housing for 48mm NEMA 17 Stepper Motors — zdjęcie 1
1 / 10

GX16 Connector Housing for 48mm NEMA 17 Stepper Motors

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple housing for adding GX16 Aviation style connectors to hard-wired 48mm NEMA 17 stepper motors.

Ocena
0 / 5
Polubienia
1
Pobrania
12
Wydruki
0
Wyświetlenia
103
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

Just a simple housing for adding GX16 Aviation style connectors to hard-wired 48mm NEMA 17 stepper motors. I didnt want to add height to my motors, and this style worked best for my CNC machine.

Update - 02/12/25: Added a version that comes straight out at a right angle and has a 1mm split to enable easier cable installation.

NOTES: 

  • Make sure you feed the wires through the retaining nut and washer before soldering your wires to the connector.
  • Stepper motors get hot, so print these in ASA or ABS - PETG and PLA are NOT suitable materials and will deform.
  • Use nylon zip-ties to fix the mount in place.

Tagi