1 / 10
GX16 Connector Housing for 48mm NEMA 17 Stepper Motors
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple housing for adding GX16 Aviation style connectors to hard-wired 48mm NEMA 17 stepper motors.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Just a simple housing for adding GX16 Aviation style connectors to hard-wired 48mm NEMA 17 stepper motors. I didnt want to add height to my motors, and this style worked best for my CNC machine.
Update - 02/12/25: Added a version that comes straight out at a right angle and has a 1mm split to enable easier cable installation.
NOTES:
- Make sure you feed the wires through the retaining nut and washer before soldering your wires to the connector.
- Stepper motors get hot, so print these in ASA or ABS - PETG and PLA are NOT suitable materials and will deform.
- Use nylon zip-ties to fix the mount in place.