P
Printables
LITTLE STEPPER MOTOR (28BYJ-48) HOLDER
GADGET FOR HOLDING AND FASTENING 28BYJ-48 STEPPER MOTOR FOR YOUR PROJECTS
Wyniki wyszukiwania: stepper
Liczymy pasujące modele…
P
Printables
Neptune 3 Pro/Plus/Max Stepper Hood With Eyes And Accessories
Added eye slots for easier placing the 20mm eyes and mounts for glasses and hats. Only 2 accessories are available at the moment but I added the hat hole and glasses arms for those who want to make their own hats and glasses. Eye holes…
P
Printables
RatRig V-Core Z Stepper Wire Guide with 3030 stoppers
This protects the wires from the Z motors on a ratrig v-core as they enter the electrical compartment. These wires run on the bottom of the 3030 extrusion at the bottom of the machine and can easily snag on something while moving the…
P
Printables
Qidi Plus4 Stepper Driver cooling Fan
The stepper motor drivers on my Qidi X-Plus 4 were reaching temperatures of up to 100°C. I mounted a 40mm x 40mm radial fan with a 3D printed mount. This reduced the temperatures by around 30-40°C. You will need a 40mm x 40mm radial fan…
P
Printables
GT2 belt Hadley Neumo rocker + Stepper mound for the rocker frame
In my mission to add Onstep GoTo to the Hadley Neumo, I modified the rocker to include a 236-tooth pulley. I used an 852mm GT2 belt. Video showing it working The stepper motor mount is made with the Rocker frame in mind. This is because…
P
Printables
Rear Z Stepper Mount For Original Ender 3 - Joushou's Triple Z Mod
Designed to fit the original Ender 3 to EN3G v1.2 conv with Joushou's triple Z.
P
Printables
ZEROG Mercury One.1 v1.1.6 inside stepper towers modified
I have two problems with the stock mercury one.1 tower: They stick out from the back and under heat and stress they bend, this make the belt rub on the idler, causing excessive wear and tear. The latter could be explained by my poor…
P
Printables
Pan Tilt Mount (Nema 17 Stepper Motor)
I have designed a precise pan-tilt system featuring a sturdy horizontal plate on top, adaptable for various applications. The system utilizes NEMA 17 stepper motors with microstepping, enabling finer control and higher accuracy in…
P
Printables
![NEMA 14 Stepper Planetary Gearbox [1:4] Compact](https://media.printables.com/media/prints/1193642/images/8970765_4c42be19-aec7-469e-8c4e-e9cb75902998_428cdf88-54da-40bd-a8a9-6a5554b5bbe1/img_20250215_225948.jpg)
NEMA 14 Stepper Planetary Gearbox [1:4] Compact
NEMA 14 Stepper Planetary Gearbox [1:4 reduction ratio]. Designed to be compact. All CAD files included (File layering is a mess). Photo depicts a custom shaft but I've included a generic template of the adapter plate. First photo depicts…
P
Printables
Crunchlabs irturret - stepper mod
Modifying the Crunchlabs irturret for stepper motors NOTES: The plastic is too soft for the azimuth bracket, so it's increasingly sloppy.
P
Printables
Stepper Stand NEMA16 V1.2
ow to construct a Stepper stand and design it in a CAD you can see on https://www.nerd-corner.com/solid-works-stepper-stand-nema-17// https://youtu.be/MYQX3vViWXg
P
Printables
NEMA 17 43-34 Stepper Motor Vertical Mount
Needed an accurate mount to install an adjustable Z axis riser to my laser engraver. These will mount inside the enclosure I have to lift and lower the entire engraver.
P
Printables
Sieg X2P stepper motor mount
stepper motor belt drive with 1:3 ratio for the X-axis of the X2P mill including a drill template with 2.5mm holes for M3 tapping also including a version with extra mount underneath the bed on the side of the stepper motor both models…
P
Printables
LEGO Minifigure Mount for Stepper Motors
Add a touch of personality to your Voron printer! These decorative parts let you securely mount a LEGO minifigure on top of the stepper motor, turning your machine into a playful showcase while it works. • Left stepper mount: The…
P
Printables
nema 23 y axis stepper motor mount
this is a mount i made for the nema 23 stepper motor. it connects to a 2020 aluminum extrusion bar. on 3d printers. it connects to the y axis bar, modifications to the aluminum are needed for it to work, if not already there, you will…
P
Printables
BTT Manta M5P Stepper Fan Mount
This design is inspired by I completely remade this, because I wanted better printability with less bridging and a different fan mount direction. One of the fans is flipped, so that hot air from above the MCU is expelled. I also wanted to…
P
Printables
Voron Trident Z-stepper covers for 2040 profile sides
Needed to make the covers/mounts fit a frame built out of 2040 extrusions. Parts are labelled as per original Voron Trident naming conventions and include the logos etc. If you happened to build your 2040 Trident "sideways" then you can…
P
Printables
Nema 17 stepper motor vertical mount with slot
Modified the orginal so you can pull the motor out without dismounting the mount.
P
Printables
Generic 28BYJ-48 Stepper Motor Adapter
Generic 28BYJ-48 Stepper Motor Adapter, printed on a Prusa i3 mk3
P
Printables
30:1 reduction cycloidal drive for nema 17 stepper
Description I couldn't find a free reduction gearbox design for a Nema 17 stepper - so I made one myself! My design only requires 2 608 skateboard bearings and a bunch of m3 screws. The drive works with the cycloidal reduction principle…
P
Printables
STEPPER CABLE CLIP
This cable clip for the stepper motors, for new Voron (or DIY) printers. I tired to make all variations (e.g for AWD).
P
Printables
Stepper adapter coupling 5mm to 8mm
This model is based on the geometry of the McMaster‑Carr 2464K14 clamping precision flexible shaft coupling. It connects a 5 mm stepper motor shaft to an 8 mm leadscrew , using a helical flex pattern to compensate for minor misalignment…
P
Printables
Geared Bipolar Stepper Motor Mount
Mounting block for 3V, 1.6A, 233 oz-in Geared Bipolar Stepper Motor with attached integrated Planetary gearbox with a 52/11 :1 ratio. Instructions Printed in ABS with 0.2mm layers. I had to clean out the bolt holes. Used 3mm flat head…
P
Printables
Eva 3 Mount for MK8 Extruder & NEMA17 Stepper
Want to convert your EVA 3 toolhead into a direct drive without buying an extra extruder and motor? Well here you go! With these prints you can save some money and reuse some of your old parts to do so! Save that purchase for later and…
P
Printables
Din Rail DM86x Stepper Driver Holder
Great for mounting larger Stepper Drivers for CNC control projects, etc. Mounts with M4 screws to the driver - minimum 10-12mm length screws. Allows for easy removal and placement on a DIN 35mm rail. Printed in PETG for strength, 25%…
P
Printables
Stepper motor fans for Flashforge AD5X and Adventurer 5M
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Check out my other AD5X replacement parts,…
P
Printables
MSG compliant AI stepper gripper
For latest models check: https://github.com/PCrnjak/MSG-compliant-AI-stepper-gripper 📖 Project Overview MSG compliant AI stepper gripper is a gripper based on StepFOC stepper drivers . It is a gripper capable of controlling its gripping…
P
Printables
ZeroG Mercury 1.1.6 stepper tower support
These stepper motor mounts are modified from the original ZeroG Mercury One.1 mounts (v.1.1.6). I modified the top and bottom support both left and right, and added a back frame reinforcement to fix support flexing. The back 5x30mm dowel…
P
Printables
NEMA 17 Stepper Arrow
Simple press-fit arrow for standard NEMA 17 stepper motor. Includes CAD files and public domain license. Use as you please.
P
Printables
28BYJ-48 Stepper Motor Pulley / Elevator Pulley
Hi, this is a pulley for tiny elevator you can use this pulley with ‘28BYJ-48 Step Motor’.
P
Printables
Stepper motor Jog Wheel 1/4 inch Drill adapter (20 mm diameter)
I created a stepper motor 1/4 inch Drill adapter for a 20 mm diameter jog wheel to aid in adjusting removing Y-Axis block for my Genmitsu 4040 Max CNC. Please use at your own risk. It's a pretty simple design where the top opening is 21…
P
Printables
BTT MANTA MP8 fan mounts for CB1 and stepper drivers
No supports ,your go to ABS print settings. CB1: 4 M2.5X16mm socketcap screws 4 M3X12mm socket cap screws for the 4040 fan on the CB1 heatsink 4 M3 hex nuts 2.5mm thick 4010 Fans mount: 3 Hex standoffs 20mm 3 M3X16mm flathead screws 4 or…
P
Printables
Snapmaker U1, cover for external fan for X,Y stepper driver
i made cover for external fan for X,Y stepper driver for snapmaker U1, thaht allow instal noctua 40x40x10 mm 5V fan from noctua without printer diesasembling. Fan is powered from USB port of U1. Fan is blowing air to inseide U1. Printed…
P
Printables
AWD SV08 Max Rear Right Stepper Mount for Cable Box
This has not been tested but should function fine to put the cable box from a Max onto the AWD stepper mount from an SV08 to build an AWD SV08 Max. Thank you Nadir for your efforts!
P
Printables
NastyThermostat — 3D printed parts for Nest thermostat Gen2 stepper controller
3D printed parts for the NastyThermostat project — a mechanical controller that automates a Nest Gen2 thermostat using a stepper motor and GT2 belt. No cloud, no API, fully local. This set includes 3 parts: GT2 Pulley 138T — attaches to…
P
Printables
P2S Stepper Motor Covers Bambu Lab Logo
Bambu Lab P2S Stepper Motor Covers Left and right side. With Bambu Lab logo cutout.
P
Printables
Ender/CR-10 X Axis Top Cover for Longer Steppers
No supports, 0.2mm layer height PETG so that it doesn't have the chance to soften if the motor heats up.
P
Printables
Mercury 1.1 AWD Mod Adjusted Front Stepper Towers
I found that installing, tensioning, and adjusting the stepper towers was tricky because a wrench had next to no room. I ended up using a small bit and pliers to lock it down, but it kept stripping the bolts. So I cutout a small section…
P
Printables
Stepper E9701N Repair Frame
The model could be improved, but it works. I've also created another model that fits the shape of the glasses better, but I'm not quite satisfied with it yet, so I'm using the published model on a daily basis. I used PLA because my…
P
Printables
Lego Technic stepper motor mount for 28BYJ-48 type
This 9 x 9 x 1 hole module provides seamless attachment of a small 28BYJ-48 type stepper motor to Lego Technic models. Great for powering a robot or other mechanism. It will mesh with standard Lego gears through a 24 tooth module 1 spur…
P
Printables
Voron 2.4 XY Stepper Motor PCB Breakout Board
This is a little breakout board board for the XY stepper motors to help with the ease of maintenance. It is to prevent the rerouting of cables through the rear drag chain of your Voron 24 printer when your having to change the stepper…
P
Printables
Voron corner bracket for z-axis stepper
A simple corner bracket for a z-axis stepper. Designed for 1515 extrusion, or more specifically, the Voron 0.1. This bracket pulls the stepper motor as close to the corner as possible while still allowing mounting bolts to be easily…
P
Printables
Anycubic Kobra Additional Z-axis stepper motor mount
Stepper mount for Anycubic Kobra(Normal) that holds using side of the frame (2040 profile). Things you also need: M3x16 bolts x2 (for steppers) M4x10 bolts x4 2020 M4 T-shaped nut x4 Update V2: - Added more mounting points - Some…
P
Printables
Stepper motor adapter for Bresser Hexafoc telescope focuser
I created this adapter to be able to use automatic focusing during my astrophotography sessions. A small Nema 17 motor is driven by an Arduino running Arduino ASCOM Focuser Pro2 DIY download | SourceForge.net and is controlled by N.I.N.A.…
P
Printables
NEMA 23 Stepper Motor Adjustable
Hi, I designed an adjustable motor holder for NEMA 23 motor. Checking the dimensions before printing can be good, some manifacturers use lighltly different ones, so that you wont waste filament :) Things you will need for assembly: 8x M4…
P
Printables
Stepper motor driver 8825 case
You can print and use it for accuracy in to your working table. No short circuit will be by random item on your desk.
P
Printables
Box for stepper motor controller ZK-SMC01
Krabička pre ovládač krokového motora ZK-SMC01 @https://www.aliexpress.com/item/1005005124688985.html Vytlačené bez podpory. PETG / vrstva 0,2 / obvod 4x.
P
Printables
RatRig V-Core Z Stepper Wire Guide
This protects the wires from the Z motors on a ratrig v-core as they enter the electrical compartment. These wires run on the bottom of the 3030 extrusion at the bottom of the machine and can easily snag on something while moving the…
P
Printables
Stepper Driver Mount
Small modular mount for two TB6600 stepper drivers and an 80mm fan. These mounts are designed to be connectable if more drivers are needed. Mounting holes for the drivers are 4.4mm in diameter. Mounting holes for the fan and the mount…
P
Printables
28BYJ Stepper motor test rig
This model was used during software development when I wasn't sure the motor would suffice for my application. There are 2 kinds of markings on the ring : The smaller are spaced by 5 degrees The bigger are spaced by 30 degrees The rig was…
P
Printables
Bracket or mount for stepper motor (kysan 1124090)
Bracket, or mount for my Kysan 1124090 stepper motors which have mounting holes in the top, but I needed to mount them where the "bottom" of the motors are attached to a plate. Included the Fusion 360 file if anyone needs to modify it for…
P
Printables
Extruder visualizer / Stepper motor Visualizer
Feedback is appreciated Remix is encouraged
P
Printables
Stepper Coolers with cold air intake
60mm cooling fan cooling for stepper motors with Cold Air Intake and snorkel (to clear the heated enclosure) I attached 4mm copper heatsinks to the sides of the stepper, the idea of this is to create a wind tunnel effect blowing air over…
P
Printables
Shapeoko CNC HDZ Z-Stepper Gimbal Mount for 2.5-inch Dust Hose
This gimbal-style mount allows the dust hose (2.5in) to clear the HDZ and rotates freely to prevent sharp bends in the hose during the movements of the CNC. ASSEMBLY Insert the spacer into the base, and assemble the clamp with an M6 x…
P
Printables
![Ender 3 V3 SE/KE X Axis Stepper cover with cable clip. [Slimmer and stronger] With optional spine cable chain](https://media.printables.com/media/prints/997542/images/7590934_1fce7923-c1f7-4fa5-bd72-395bbf9c98d6_c07266b5-b580-4bab-a593-653b146c3dd0/pxl_20240905_165430364.jpg)
Ender 3 V3 SE/KE X Axis Stepper cover with cable clip. [Slimmer and stronger] With optional spine cable chain
Original model were too fragile for me and had a gap on top of my stepper, so I decided to make a stronger and slimmer version. It's a X axis Stepper motor cover that also doubles as toolhead cable clip. There is two versions: - With…
P
Printables
NEMA 17 stepper motor to actobotics mount adapter
An adapter for a nema 17 stepper motor to an actobotics frame. Made it to work with this stepper motor: https://www.sparkfun.com/products/9238 The motor will need 4 M3x10mm, the actobotics screws will be 6-32 x 3/8in screws, which are…
P
Printables
reittec polisher stepper mod
Update 11/2021: Added a stronger drive gear, since the normal one failed. For this one you have to get the orientation right. In any case I recommend printing in ABS and checking the screw regularly to prevent coming loose. Reitec…
P
Printables
Benfeybay 50mm Linear Rail Stepper Motor Model
Part on Amazon: https://www.amazon.com/dp/B087NMCGPV Part on AliExpress: https://www.aliexpress.com/item/2255801085771823.html
P
Printables
Altmill Closed loop Nema 23 Stepper motor cover
The closed loop stepper motors have 12 wires on them in 2 different locations. this cover protects them from accidently bumping into them. works great on the Sienci AltMill
P
Printables
NEMA 17 stepper damper
Your 3D printer is too loud? Try these stepper dampers. Not only will they dampen sound, they can also reduce vibration.
P
Printables
ZeroG Mercury 1.1 stepper tower support
Modeled to use “ Mercury One.1 Zero G Inside Frame Stepper towers” by mhunley123 from thingiverse. (https://www.thingiverse.com/thing:5996645) Requires: 1 m5 heatset insert 1 m5 bolt (minimum 50mm) 2-3 m5 t-nuts 2-3 m5x15mm bolts (for…
P
Printables
Prusa i3 extruder stepper cooler
Remix to fit MK2 fan that got redundant somewhere in MK2 -> MK2.5-> MK2.5S upgrade chain Print Settings Printer Brand: Prusa Printer: MMU2s Rafts: No Supports: No Resolution: 0.2 Infill: 5 Filament: ClasOhlson PLA gray Category: 3D…
P
Printables
K1 / K1 max E stepper fan mount
You may not need this “active cooling” mod! I have two easier suggestions below you could try first. Take a look. The issue of "Heat Creep" The Creality K1 & K1 Max extruder stepper motor generates a LOT of heat. This heat builds up and…
P
Printables
Filament Roll with Stepper
Hi all, this is the Filament Roll with Stepper. It can be dynamically changing width dimension. It is just generated theoretically but I think i works =)
P
Printables
K1C stepper motor cover (heatsink compatible)
replaces the part covering stepper motor on the toolhead of any K1 printer to allow addition of a stepper motor heatsink to reduce heat buldup in the extruder and hopefully reduce or eleiminate jamming. PRINT IN A HIGH TEMP FILLAMNET. i…
P
Printables
Parametric Stepper Motor Heat-Sink
Design to use TCPoly's Thermally Conductive Material . Engineered in OpenSCAD . This is a filled filament so you will need a hardened nozzle, I recommend a 0.6mm Nozzle X . Printer settings. 0.6mm Nozzle. 0.3mm Layer Height. 30mm/s Print…
P
Printables
Lego wheel to stepper adapter
This is a little adapter to fit a lego wheel to a nema17 stepper motor. To assemble your gonna need two m5 screws. Category: DIY
P
Printables
Slewdrive for stepper 28BYJ-48
Točna https://www.printables.com/model/144450-parametric-slew-drive-v2 (airsoft BB kuličky 6mm) upravená pro krokový motor 28BYJ-48 : https://www.hwkitchen.cz/krokovy-motorek-28byj-48-driver/ Vylepšená verze / NEW VERSION:…
P
Printables
Turbolader Stepper Spinner Anet a8
Spinner for the Stepper motors Print Settings Printer Brand: Anet Printer: A8 Supports: No Infill: 100 Filament: Janbex PLA Notes: print time in arround 10 mins Category: 3D Printing
P
Printables
LITTLE STEPPER MOTOR (28BYJ-48) HOLDER
GADGET FOR HOLDING AND FASTENING 28BYJ-48 STEPPER MOTOR FOR YOUR PROJECTS
P
Printables
Neptune 3 Pro/Plus/Max Stepper Hood With Eyes And Accessories
Added eye slots for easier placing the 20mm eyes and mounts for glasses and hats. Only 2 accessories are available at the moment but I added the hat hole and glasses arms for those who want to make their own hats and glasses. Eye holes…
P
Printables
Vented Altmill Stepper Motor Cover
Vented Altmill Stepper Motor Cover to help prevent damage to the motor & cabling.
P
Printables
FYSETC Spider (All Versions) Stepper Fan Shroud
Available in 2 or 3 Fan variants, simply prints upside down and screws in using the original fixing points and longer (40mm) screws. I designed this to be printed at .2 layer height, it requires 4x Heatset inserts per fan. It was designed…
P
Printables
Fysetc Spider stepper driver cooling duct
Cooling duct for the stepper drivers for my custom Voron build. It suites 6 or 7 steppers drivers. Pick the file you need. Note: didn't test the 7-stepper driver version, since my printer has only 6 (extruder is on the toolhead board).
P
Printables
Stepper Stand Nema 34 V1.1
More information: https://nerd-corner.com/solid-works-stepper-stand-nema-17/
P
Printables
RatRig V-Core Z Stepper Wire Guide with 3030 stoppers
This protects the wires from the Z motors on a ratrig v-core as they enter the electrical compartment. These wires run on the bottom of the 3030 extrusion at the bottom of the machine and can easily snag on something while moving the…
P
Printables
Stepper motor box chassis
I made this project for custom made 3d printer it is decoritive for stepper motors
P
Printables
Ender 3 V3 KE/SE Z Stepper Motor Spacer
The Creality Ender 3 V3 KE is plagued with the instability of the Z-axis after doing the usual mods of installing reinforcement of the gantry and TPU feet, the performance still didn't improve much. I noticed that when checking for…
P
Printables
Raspberry Pi Camera Bracket for Stepper Motor
Camera and stepper motor bracket. One side connects to the raspberry pi camera (I used M2*6mm screws to secure it), the other snaps around the NEMA stepper motor: The camera is slightly angled and offset so that the extruder is perfectly…
P
Printables
Prusa I2 Y stepper bracket, adustable and removable
I wanted to be able to tenson my Y belt without haveing to pull the machine apart to replace parts. I found two things that where close and basicaly combined them. Since this part was orriginaly a dxf that was extruded and I have no way…
P
Printables
28byj-48 stepper mount
Made it for my personal project. I was done to be printed without support. Enjoy 🙂
P
Printables
K1/Max Stepper Motor Cover (remixed for easier printing)
Changed fillets to chamfers for easier overhang printing.
P
Printables
Nema17 stepper motor
A NEMA17 stepper motor mock-up with a rotating shaft and face mounting capabilities. Print Settings Printer: Prusa i3 MK2 Dolly Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% Post-Printing Remove supports and clean up. Assemble…
P
Printables
Ender 3 V3 SE Stepper Motor Cover
I have added 2 versions with small differences. One has the “Ender” text and the other one doesn't. Both could be preffered. Thanks for checking out!
P
Printables
MINI x-axis stepper motor cable guide
Is it overengineered? Yes. Can you overengineer it even more?! definitely! Requires a 3030 M5 t-nut and M5x12 screw, optional a 2.3mm wide cable-tie. I wanted the x-axis motor cable to run close to the extrusion profile, thus I sketched…
P
Printables
Simple hand-cranked Dynamo based on 28BYJ-48 stepper motor
As part of a school project showcasing alternative power sources, this is a small, simple hand-cranked dynamo, capable to light up some LEDs, or something bigger, if you connect all the phases. A rectifier diode bridge (made with four…
P
Printables
mk3s extruder stepper cooler ( MMU3 compatible )
I completely redrawn the model because i couldn't find editable one If you need model in a specific format just ask.
P
Printables
Qidi Plus4 Stepper Driver cooling Fan
The stepper motor drivers on my Qidi X-Plus 4 were reaching temperatures of up to 100°C. I mounted a 40mm x 40mm radial fan with a 3D printed mount. This reduced the temperatures by around 30-40°C. You will need a 40mm x 40mm radial fan…
P
Printables
Stepper motor cable holder
Releaves stress on stepper motor cable ooccuring in motion of the printing assembly. Must have on Direct Drive printers. SNUG FIT, print with upright (flop picture :) ), no overhangs thus no supports needed. Tested on CR-10 PRO-S V2…
P
Printables
Clockhands for NEMA17 Stepper Motors
Do not guess the direction of your stepper motor any longer while developing code - just use a clockhand-style pointer. These parts are press-fit for NEMA17 axis, just print it with an as-fine-as-possible setting (I used 0.1mm Layers in…
P
Printables
FLSUN Super Racer 5015 Fan Duct for Mainboard Stepper Drivers
I had some extra 24V 5015 blower fans lying around that I used to upgrade my FLSUN Super Racer's part cooling, so I figured I'd upgrade the mainboard cooling too! This drop-in replacement directs the air flow over the stepper driver…
P
Printables
Stepper Motor Cover with Prusa CORE One Logo
For those of you who cannot wait till Prusa CORE One is coming, I’ve designed covers featuring its logo! These can be attached to stepper motors on the Prusa i3 MK3/S/+, MK3.5/S, and MINI/+. Print settings Slicer: PrusaSlicer 2.8.1 Based…