1 / 1
Ender 3 V2 Y stepper motor cooling mount 40mm fan — zdjęcie 1

Ender 3 V2 Y stepper motor cooling mount 40mm fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a Ender 3 V2 Y stepper motor cooling mount which will fit a 40mm fan.

Ocena
5 / 5
Polubienia
35
Pobrania
288
Wydruki
2
Wyświetlenia
1893
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I noticed my y stepper motor on long prints would get so hot I would get burned if I touched it.  I made this to fix this issue.  The stepper now is warm, but will not burn me anymore.  

 

This was printed with Red translucent PETG.  

Recommended settings:

78 - Bed with garolite (70 if you don't have garolite)

245 extruder

70mm/s with klipper or 35 mm/s with marlin

20% infill - I didn't really notice any infill needed on this print since it is so small.

 

Tagi