1 / 1
Nema 17 Stepper Motor Spacer - 1.9mm - With Step File
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nema 17 Stepper Motor Spacer. The STL is 1.9mm Tall. Included is a step file for all your custom spacing requirments.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 358
- Wydruki
- 7
- Wyświetlenia
- 837
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 7) (Komentarze: 7)Remiksy (0)Kolekcje (16)Powiązane
Basic Nema 17 Spacer with Step File for any custom spacing you require.
I printed mine as per below:
Printer: Ender 3 V2
Material: ABS+ (As mine was going in a heated enclosure)
Filament Brand: ESUN
Infill: 30% (So i could clamp the motor down tight without deformation)
Build Plate Adhesion: None