Stepper Motor Fan Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this fan mount clip for stepper motors as I needed to attach a fan and didn't want to use cable ties or anything…
- Ocena
- 4 / 5
- Polubienia
- 48
- Pobrania
- 306
- Wydruki
- 2
- Wyświetlenia
- 1459
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made this fan mount clip for stepper motors as I needed to attach a fan and didn't want to use cable ties or anything that's semi-permanent. This clip style is easy to attach and detach.
For 40mm fan. Can be adapted to smaller fans, I'll probably upload clip for 30mm fan as I have those lying around and the current 40mm fans are quite loud.
Update 13.1.2018:
- added 30mm and 35mm fan versions
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
50%
Notes:
Printed these with PETG and they work fine. PLA and ABS should work also.
Post-Printing
Remove brim if brim used. Bolt holes might need drilling, depending of the print tolerances and bolts you are using. I used 4 16mm M3 bolts and M3 nuts, should be able to screw the bolt right to the hole as long as not overtighten it.
Category: 3D Printer Accessories