1 / 2
24 tooth Lego gear adapter for 28BYJ-48 stepper motor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
24 tooth lego gear, but flattened for easy printing and with a stepper motor shaft hole instead of the axle hole.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 538
- Wydruki
- 1
- Wyświetlenia
- 1314
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (42)Powiązane
Only top is rounded, to make printing easier
Printing notes:
- Prints in-place, no supports
- This models assumes a fairly well calibrated printer, but you probably don't have one:
- Try to print as-is at the start
- If axles don't fit properly or you can't insert the motor, use a slicer feature like x-y hole compensation to make them wider (I print on an Ender 3 v2 with a value of 0.05). I wouldn't raise this value too high, or the gear might slip off
- I used 100% infill for strength, but it's probably overkill
Created to be compatible with:
https://www.printables.com/model/263749-lego-technic-stepper-motor-mount-for-28byj-48-type/files
