Ender 3 S1 Y-Axis Stepper Cooling Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
On my Ender 3 S1, the stepper motor of the Y-axis gets very hot. For this reason, I made myself a cooling housing.
- Ocena
- 4,667 / 5
- Polubienia
- 68
- Pobrania
- 332
- Wydruki
- 3
- Wyświetlenia
- 2853
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The model I have designed is intended to provide more effective cooling for the stepper motor of the Y-axis of your Ender 3 S1. The stepper motor is optimally cooled with a 60mm fan that is fastened with 4 M3x16mm. The model consists of two parts, the housing and a cover plate.
The cover plate must be printed separately and is then securely attached to the enclosure using superglue or 2-component glue. The housing itself is attached to the Y-axis bracket as shown in the attached picture. 2 M3x8mm screws are used for this.
The fan can be connected either directly or via a voltage regulator to the port for accessories. This model ensures optimum cooling of the Y-axis stepper motor to improve the life and performance of the motor and to achieve higher print quality.
Print Settings:
Material: PLA, PETG
Infill: 20%
Resolution: 0.2mm
Supports: Yes, only for the side part of the screw fitting (see picture, blue marked)