121 models
There's a model for a 48mm thread (usually from European 5-6l bottles) and for a 28mm thread (ex. Coca Cola bottle). Using a 48mm thread is recommended because the seeds don't get stuck Poke a small hole in the center at the bottom of the…
--Updated V2 Available Now!-- Features 3mm alignment pins and better clearance! Use standard nails as alignment pins for more consistent driving. This is a fork seal driving tool for use with 48mm diameter dirt bike forks. This was…
Originally made for cheap tiny lathes like those sold on Amazon ( like so ). Remixed from mdkendall's excellent design that provided the basis for this smaller version. Thanks mdkendall! This version mini-fies the design to: work within…
Original Creator: https://www.thingiverse.com/thing:3388750 (All files are already in 50% Size!) i edited the original cube so you can print it in 50% Size and made some small improvements like: Logo looks more like the original. Added…
Small Shelf for a better organization of your Spice inventory. 2-5 Containers per Print. Print instructions I recommend using Food safe Materials, like PLA or PETG. Use 3mm countersunk head screws for mounting. Print tested in PETG
Eckverbindungen für Konstruktionslatten 24mm x 48mm Größe: 80mm x 82mm x 55,5 mm (BxLxH) Jeweils eine Rechte und eine Linke Eckverbindung
This is a simple remix of https://www.printables.com/model/255933-tape-dispenser-customisable-magnetic to allow for 48mm tape (like packing tape) that I did in Tinkercad as I didnt have anything to use their parameterized file with.
A round shaped screw measuring tool in a diameter of 50mm with 6mm height to fit in a pocket with a capability to identify M2, M2.5, M3, M4, M5, M6 screws and measure screw lengths up to 48mm. I have used PLA, 0.2mm layer height, 10%…
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
This is a remixed model designed for smaller spools with a width of 48mm. I have smaller spools myself, so I had to modify the original design to fit my needs. This version might also be useful for others who have similar spool sizes and…
This model is compatible with the lego system.
Flaschen Trockner für SIGG Getränke Flaschen passend. Ohne irgendwelche Schrägen so steht die Flasche sicher ohne zu kippen. Gedruckt in PETG - weiss - keine Supports nötig - Infill 15% oder 20%
The print in place mecanum wheels were ok, but suffered from the use of PLA for the rollers, which really limited the surfaces that they functioned properly on. I did consider a new self assembly wheel with TPU rollers but discovered that…
Zestaw uchwytów do mocowania ogrodzenia drewnianego na słupku Fi 48mm... XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX A set of brackets, for fixing a wooden fence on a post Fi 48mm ... - Jeżeli chciałbyś zapoznać się z tym co robię na…
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
Update 20240123 : Added V2 revisions of both designs for Ender-3 S1 compatibility (175x170mm). This new version is retrocompatible with 170x170 beds. Refer to Gulfcoast Robotics' amazing explanation . V1 is only compatible with 170x170mm…
Modified the original 40mm design of cndewil and extended it to support the taller 48mm nema 17 stepper motor variety.
Can be printed with 0.4 or 0.6 nozzle. Recommended to have infill of 10% or more.
If you want to have your cordless screwdriver, impact wrench, electric drill or whatever right in place you can have it with one of these holders (125mm baseplate). The center hole is sloped by 5° to the user to make the handling more…
I 3D scanned this Arrma part and edited the holes a bit so it's printable. It is a little bit rough on the surface. The printed one is on the left. It fits without any problems, screw holes are a bit tight but it won't strip your screw…
This remix makes room for a 48mm Y axis stepper motor. I did test print it at 5mm thick with ASA and it worked, but tigtening the bedscrews will bend the corners upward. It needs to be made out of aluminum. I used https://sendcutsend.com/…
I printed with 10 wall lines and 100% infill. I have a hefty blind, so I don't want to take any chances. For the freewheeling tube plug, I used the included metal axle with a standard skateboard bearing. I used these ones, but any…
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
I didn't have a tamper and needed one. This seems to work perfectly with just a little bit of room at the sides for relief. Message me if you have any questions! Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
Print one 45, one 48 and one bottom bracket. If you use the hose grommet, print in tpu. Hose grommet is not necessary. Use m6x20 bolts and m6 nuts to clamp. Mount 48 clamp high enough above the fork guards that they do not collide when…
Extended cooler bodies for 48mm stepper motors.
A precise model of the Nema17 2.5A 48mm stepper motor I made NOT for printing, this models parts are not joined together and could cause a very weak print! Category: 3D Printing
I printed this tool with 50% fill and it worked great.
This is an Arduino-controlled ring light for stereo microscopes with a 48x0.75mm threaded nose piece. This is one of the most common sizes and fits my vintage Olympus unit. Other thread sizes for which commercial ringlight adapters are…
This is a rim for WLToys 1:18 RC Car that takes 48mmx31mm rims with a 3mm hole in the middle and 7mm nut shaped hub. If you have any questions feel free to comment or dm me. Print Settings Printer: Custom CoreXY Rafts: No Supports: Yes…
Geschenkspapier Wandhalter mit 4 Löcher (jeweils 48mm) für offenes Geschenkspapier. Hier kann auch geöffnetes Geschenkspapier aufbewahrt werden.
A very minimalistic picture frame for 4x6 (100x148mm) pictures. It has multiple mounting holes for pins or nails, depending on if you want to mount it portrait, landscape, at a slight tilt, as a chain, etc. The Frame uses barely any…
This is a remix of card box + short dividers from Gloomhaven Sleeved Cards Storage Organizer by valhala which is a remix of Gloomhaven Full Storage by Wolph42 . The original card box by valvala didn't fit my small sleeved cards. They were…
My cars' winter tyres where fitted on Tekno Wheels rims, and the center hole caps were in really bad shape, so I made these. These fit 48mm center hole. Scaling on XY might allow you to fit them on other hole sizes too. STL is just plain…
A simple tool which uses a slotted ¼" hex bit to adjust the compression clickers on a 48mm KYB shock - Adjusting them using a screwdriver is often difficult because the bars are in the way. There are 2 models here, 1 for standard 25mm…
Information This is a lens hood for the W-Nikkor 3.5cm f/1.8 rangefinder lens (in Nikon S mount). It should also fit on the rare third version of the 3.5cm f/2.5. It uses a M48 X 0.5 filter thread. "Why does it have all those holes?" On…
Printing Instructions Filament Material Advised PETG/PET/ASA Material Propaties Required Property Type Constancy Hard Durablity Not brittle Sun Bleaching Protection depends on use case but would advise for long term use not using PLA Heat…
This is a remixed model designed for smaller spools with a width of 48mm. I have smaller spools myself, so I had to modify the original design to fit my needs. This version might also be useful for others who have similar spool sizes and…
Lens caps for binoculars with 48mm & 38mm outer diameter lenses. The 38mm cap is designed to be looped through a strap m
This is a box for a LM2596 converter whose board measures 48mm X 23mm. A quick way to tell if this one will work for you is if by the output positive there are 4 pads arranged in a square. I made this after I realized that not all…
i thought i'd need to make the base wider for more surface area but turns out it is plenty big enough, i covered the whole surface with pattex double adhesive, i think 3M VHB would work just as well. electric guitar has been attached for…
I created this Ikea Skadis compatible vacuum and duster holder as I was sick of my hand vacuum laying around. I use it to suck out all the strings and bits and bobs out of my printer, it's a very handy tool to have around. Also use it to…
From the original upload: A simple hook for a cubicle wall with 48mm wide tops. Added some curves and angles for strength and smoothness.
Please note, this doesn't have the lock mechanism (it would be pretty easy to add, just haven't done it yet cause I was too excited to get this up and running, lol). The weight of the Satellite should be plenty to keep in place for now. I…
The ADS-B radome by markend is a brilliant design - looks really smart and fits really nicely with no soldering necessary to fit everything together. My only issue with it was the mount, which I wanted to modify so that it would fit on…
There is a lot of cheap and stable arms for microscopes, like Relife one. These is an adapter for arms with tube diameter 31.8mm, as the source file is included you can mod it for other diameters. Because there is play between the arm…
Bei unserer Bad-Dachluke war das Fliegengitter gerissen. Ich habe die Gitter-Reste entfernt und einen Spannrahmen gedruckt, der in den originalen Träger passt. Die Maße des Rahmens sind 248x248mm mit zwei abgeschrägten Ecken und einer…
The handle for the balcony door is mounted on the outside of the balcony door. It can also be used on terrace door, door screens and similar applications. The holes spacing is 43 mm and 48 mm. The hole diameter is 4.6 mm. Add a small drop…
This is a replacement battery hold-down for the Traxxas Rustler 4x4 VXL, to fit 48mm tall batteries. I'm modifying my Rustler to support 4S, and the batteries I've chosen are suited for being used in an xmaxx, so they're tall bois. It's…
I had some left over 48mm Motors from upgrading my Voron A&B drive motors and wanted to put them on my SV06 but the stock Y mount can only fit a 40mm when the stock Motors are only 34mm tall. Also allows the Bed Belt block to impact the…
English description (German description below) Stand for squared timber - The dimensions of the squared timber are 24x48mm. - Two versions available: High (55mm mounting) and Low (40mm mounting). - The bottom of the low version is open,…
The covers were printed from TPU95, filling 100%. Added cutouts to fit standard 5mm wide zip ties. Shields fit any fork whose outside diameter is about 57mm.
7-day insert for 88mm x 48mm pill bottle, as used by HyVee and other pharmacy chains. I use these for daily doses, but also made an AM/PM variant for those who take pills twice a day. This version has slots in the bottom nthat act as a…
Overview A clean, minimalist replacement for the standard plastic "pull tabs" on balcony and patio doors. This model specifically features the common 48mm screw hole spacing (center-to-center), making it a drop-in replacement for the…
Kann z.B. in Stallschränken eingebaut werden, damit die Mäuse nicht durch die Lüftungsbohrungen in den Schrank gelangen.
This is an adapter to attach ring lights to microscopes that do not have a groove to hold on to. It screws into the thread that is usually meant for attaching barlow lenses, a 48mm (x 1mm pitch?) thread in this case. The adapter extends a…
I started this project as an addition for my XRP Offroad mod that can also be seen in the rendered picture to make it ready for the water and you're not limited to the XRP Boat Mod anymore. And in theory this would also work, but that…
Motor mount for Traxxas X-Maxx, designed for a Castle 1717 series 48mm motor. Includes a version with an integrated fan mount and one without, and a 1mm spacer that can be used to shim the mount to fit larger gears. Without shimming, it…
A quick and simple end cap to pop on the end of 48mm speed rail tubing. The ID is 42mm so in my case it has a snug fit. The shape is hexagonal to prevent the pipe from rolling. I also added rounded option. PETG and ASA/ABS would be most…
No inserts are needed, use original screws. You will need extra 4pcs of M4x15mm screws at least. you could go longer than 15mm. No supports, 0.2, as much infill as possible. thick walls. PS. Zip ties in the pictures are not needed at all.…
1x1 bins for AIRTOON toolbox / organizer. May also fit other branded toolboxes with 48mm bins NOTE - the feet on the bottom of the cubes are required to keep things from sliding around when the organizer lid is closed. The bottom of the…
133mm-120,5mm connector 148mm-120,5mm connector counterhold designed with M4 inserts inmind I designt these to connect air hoses with a flage.
Tachohalterung für Mofa/Töffli (Puch, Hercules, Sachs, Kreidler, DKW etc.) Halterung für Nachbauscheinwerfer für Mofa
Building a DIY battery bank requires precision and safety. These spacers are designed to securely hold 3.2V 120Ah LiFePO4 cells , ensuring they remain perfectly aligned for busbar installation while providing structural integrity to your…
A cable guide for 48mm forks for Surron or similar.
This is the Bios: Megafauna boardgame insert, remixed with the width fixed to fit the second edition of the game box which is 148mm wide. Print Settings Printer Brand: Prusa Rafts: No **Resolution:** 0.2 Infill: 10%, Adaptive Cubic Notes:…
This is my first project here. For those who are tired of struggling with adjustable easel, I've created this project for better repeatability, ease and timesaving while printing little postcards in the darkroom. This easel is designed to…
I created this motor mount for the creativity elf/coreception 300 to mount 48mm steppers without major modifications. print in a high temp filament that will not creep (ex: abs,asa,pc,other.) I printed mine in push plastics CF PC+PBT but…
Koudelinek_kryt_48mm_objektiv
Made these adapters to convert a fat tire bike (197mm) frame to 148mm rear boost hub. -Print in PPA-CF for strength. -No supports needed -Do not attempt this unless you are a mechanic -Replace brake disc bolts with M5 x 40mm bolts…
The Kartt 48mm Heavy Duty Cast Iron Swing Clamp has a design flaw. In that it allows the ‘captive’ nut to move back in the casting. Meaning the clamp must be almost completely closed before the screw handle can engage the threads. This…
Eheim Twin Duo Adapter 48mm Category: Hobby
REQUIRES CWT EXPERIMENTAL +10MM Y PARTS BELOW FOR 48MM STEPPERS, BEARING BRACKETS ARE GOOD FOR STABILITY TOO: https://www.printables.com/model/727854-sovol-sv-06-reinforced-y-axis-components-7mm-eleva/files A "Double Sheared" (bearing…
Just a simple housing for adding GX16 Aviation style connectors to hard-wired 48mm NEMA 17 stepper motors. I didnt want to add height to my motors, and this style worked best for my CNC machine. Update - 02/12/25 : Added a version that…
Dust collector adapter for a hose to a Mullet Tools cyclone
Printing More walls are better, At least 3. Probably will work will work with PLA, but might be junk after. PETG will also work great, but I recommend not using a metal hammer as it can shatter sometimes. I used 3 walls and 30% Infill…
What a great time to be alive! Fuzzy little work spaces for us to live in and earn our keep on a daily basis... ample coffee day and night. sigh ... good times. Oh, and if your cubicle wall is 48mm thick and the coat hook that is supposed…
This is a 5-slot spool holder for Silicone-insulated wire spools 48mm in diameter and 34mm wide. The spools snap in place with a slot for the wire to exit near the top front. Printed in PLA. I printed at a 45 degree angle (with brim &…
The Nikkor P 8.5cm f/2 is one of the lenses that put Nikon on the map, but it came about when filter sizes were less standardized. It's really hard to find 48mm-sized step up rings and filters, and the ones that exist today usually have a…
IKEA OFTAST Bowl Holder - Height 5cm, Diameter 15cm (exactly 148mm) I created this bowl holder because our old cat doesn't have many teeth left, and when he licks kibble and food from his bowl, there used to be a mess around the feeding…
my kitchen door hinges are failing. the new hinge i got has different hole patern on the door side. I don't want to modify the door, so i made the jig to modify the hinges to use the existing holes on the door. (hinges are cheaper than…
FreeCAD file included. I printed it in ASA as this is exposed to sunlight and the elements in my case. Warning: Beware of the spacing to your individual shutters as this is quite a bit larger than the original one.
Mit diesem Stabsystem können Sie Batterie-Akku Zellen TypAA aufbewahren oder verschalten paralleloder Seriell!
This adapter was designed for the Eschenbach 33213 microscope , allowing standard 48mm Barlow lenses to be used in place of the original proprietary Eschenbach accessories. The factory microscope uses a ribbed push-fit mount for Barlow…
Die Originalhalterung an meinem Fahrrad war gebrochen. Deshalb habe ich es nachkonstruiert und in PETG gedruckt. Beim Drucken sollte 100% infill verwendet werden und die Lasche auf der Druckplatte aufliegen.
Balcony door handle, holes 48mm apart Plugs can be printed without supports, just upside down. Print setting: Material: PET-G or other UV stable material(preferrably ASA) Perimeters: 6 Support material: Yes, Organic, Use support blocker…
The handle for the balcony door is mounted on the outside of the balcony door. It can also be used on terrace door, door screens and similar applications. The holes spacing is 43 mm and 48 mm. The hole diameter is 4.6 mm. Add a small drop…
IKEA OFTAST Bowl Holder - Height 5cm, Diameter 15cm (exactly 148mm) I created this bowl holder because our old cat doesn't have many teeth left, and when he licks kibble and food from his bowl, there used to be a mess around the feeding…
FreeCAD file included. I printed it in ASA as this is exposed to sunlight and the elements in my case. Warning: Beware of the spacing to your individual shutters as this is quite a bit larger than the original one.
This is my first project here. For those who are tired of struggling with adjustable easel, I've created this project for better repeatability, ease and timesaving while printing little postcards in the darkroom. This easel is designed to…
The original cap has been adapted to a specific model I found on temu. You can see the model in one of the pictures. If you wish to make changes to suite your own dispenser, here is a link to the Onshape document:…
This is a remixed model designed for smaller spools with a width of 48mm. I have smaller spools myself, so I had to modify the original design to fit my needs. This version might also be useful for others who have similar spool sizes and…
Overview A clean, minimalist replacement for the standard plastic "pull tabs" on balcony and patio doors. This model specifically features the common 48mm screw hole spacing (center-to-center), making it a drop-in replacement for the…
This is a box for a LM2596 converter whose board measures 48mm X 23mm. A quick way to tell if this one will work for you is if by the output positive there are 4 pads arranged in a square. I made this after I realized that not all…
Model of the .30 Thompson Center cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be…
this roll holder is meant to be glued with 19mm double sided tap
Držák pro připevnění na trubku průměru 48mm po vytisknutí 1. části je třeba udělat závit M6 pro uchycovací šrouby
