48mm Hood for Nikkor 8.5cm f/2 Nikon Rangefinder Lens
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lens hood for the Nikkor P 8.5cm f/2 Rangefinder Lens, S and LTM
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Nikkor P 8.5cm f/2 is one of the lenses that put Nikon on the map, but it came about when filter sizes were less standardized. It's really hard to find 48mm-sized step up rings and filters, and the ones that exist today usually have a 0.75mm thread pitch which can cause damage to the traditional 0.5mm pitched threads on the lens.
I took some liberties with the design of this hood to make it my own - I don't have the original hood, but this one is possibly larger, which is good because this lens flares like crazy! My design can also be unscrewed and reversed (push-on style) for storage. Additionally, you can squeeze in a modern 43mm (0.75mm pitch) filter, which I've tested to make sure it doesn't vignette. In stored position, you can place a 43mm lens cap for protection (though if you have a filter installed, it may stop you from mounting some lens caps). I've also increased the outer diameter of the hood so that the camera sits flat on a surface when the lens and hood is attached.
Print settings: object facing down, with the threads side at the top. 0.4mm nozzle at 0.08 layer height (or close to it) recommended for printing fine threads. No supports needed. PETG recommended.