Counting matching models…
An AF Nikkor 24 rim protector with 52mm filter thread v3 for protecting the lens glass on this lens. On my lens the filter thread had sheered off leaving the convex part of glass lens exposed to scratches if placed glass downwards. Also I…
The W-Nikkor 2.1cm f/4 requires a special lens cap, and the original cap is hard to find and quite expensive. So I designed one for anyone to print out. I've made versions with the flash coupler mount of the original viewfinder as well as…
This is a simple twist-on lens cap for a rare vintage lens made by Nikon. I made a few versions, including a multicolor version (pictured) as well as a version with no logo. Let me know if you have any issues or questions, enjoy!
My main lens' cap is always falling off in my camera bag. This over the top style cap works far better. If you can get TPU to play nice, that is going to be your best bet. It also works with PETG and PLA, but you will want to size up the…
An AF Nikkor 24 rim protector with 52mm filter thread v3 for protecting the lens glass on this lens. On my lens the filter thread had sheered off leaving the convex part of glass lens exposed to scratches if placed glass downwards. Also I…
Gegenlichtblende / Sonnenblende / Störlichtblende / Streulichtblende für das 8,5cm f2 Nikkor für die Nikon Meßsucherkamera. Gewinde M48 x 0,5 Kann aufrecht stehend mit der großen Öffnung nach unten ohne Unterstützung gedruckt werden. Für…
This works on the Nikkor-sc auto 50mm f1.4 shown, I believe there are different versions, and this won't work on all of them. I uploaded 2 versions, one with and one without the pattern to add more grip.
This is a lens hood for the following Nikon Rangefinder lenses: W-Nikkor 3.5cm f/2.5 (first and second versions) W-Nikkor 3.5cm f/3.5 (second and third versions) The thread is 43mm x 0.5mm pitch, which matches Nikkor lenses from this era.…
Gegenlichtblende für das Nikkor W-Nikkor 1:1,8 f=3.5 cm Weitwinkelobjektiv für die Meßsucherkamera. Da ich dieses Objektiv - leider - nicht selbst besitze wurde das Modell mit geduldiger Hilfe anderer Personen, welche mir die Abmessungen…
Information This is a lens hood for the W-Nikkor 3.5cm f/1.8 rangefinder lens (in Nikon S mount). It should also fit on the rare third version of the 3.5cm f/2.5. It uses a M48 X 0.5 filter thread. "Why does it have all those holes?" On…
-Slip in hood, threadless, fit tightly. -Possible to lock in position with an extra M2x3mm screw and metal spacer on slot. -Print with fuzzy skin walls, no support needed. -Cap added.
Lens hoods for AF-S DX Nikkor 55-200mm ED VR lenses. These are reversible like the HB-37 lens hood from Nikon. Supports are needed to make the reverse hood mount print properly. .STL and .STEP files included.
Clamp to add a guide scope to a Nikon 300mm f4. Made to fit the ZWO Synta/Vixen style clamp (ZW-FS-II). The holes for the Vixen saddle is threaded for M4. Be careful not to overtighten the screws. These holes could be made stronger using…
Nikon 40mm lens cover. Print in TPU. 26mm lens cover: https://www.printables.com/model/1432243-nikon-28mm-f28-protective-lens-cover Check out my Nikon ZF grip: https://www.printables.com/model/1424562-nikon-zf-camera-grip
The W-Nikkor 2.1cm f/4 requires a special lens cap, and the original cap is hard to find and quite expensive. So I designed one for anyone to print out. I've made versions with the flash coupler mount of the original viewfinder as well as…
This is a simple twist-on lens cap for a rare vintage lens made by Nikon. I made a few versions, including a multicolor version (pictured) as well as a version with no logo. Let me know if you have any issues or questions, enjoy!
Recently I got the gridfinity fever and I started to create some bins for my photography drawer. This model uses a 2x2 grid (42mm standard gridfinity size) to create a nice little bin for a nikkor 28mm lens. I made sure it fits with the…
I created this M65 mount that gives you the proper flange distance for fixed infinity focus for the Nikkor 90mm.
The Nikkor P 8.5cm f/2 is one of the lenses that put Nikon on the map, but it came about when filter sizes were less standardized. It's really hard to find 48mm-sized step up rings and filters, and the ones that exist today usually have a…
Another lens with an original lens hood that costs thousands of dollars due to its rarity. I made this model which is much smaller, and includes vent holes so you can see the whole frame through the viewfinder. I've designed it as a…
As it is a basic design for verification, there is a risk of the lens falling off while focusing. Please use it carefully.
Gegenlichtblende für das Nikon Nikkor 5cm f2 M39 LTM Objektiv mit M40,5 x 0,5 mm Gewinde. Benötigt Stützmaterial. Den Teil mit dem Gewinde mit möglichst niedriger Layerhöhe drucken. .................... Lens hood for the Nikon Nikkor 5cm…
Nikon AF-S NIKKOR 70-200mm f/2.8G ED VR1 Tripod Foot + Modular Arca-Swiss Mount Hey everyone! I recently bought a Nikon AF-S NIKKOR 70-200mm f/2.8G ED VR1, but it didn't come with a tripod foot, so I decided to design my own! The foot…
Checkout for ver 3, reduced design not just replicate internal structure of original aperture ring, replicate Nikon grooves as it is also (if you want to), less support (but still important to use on internal surfaces not visible anyway),…
Modular lens hood system designed for Nikon 40 MM SE lens. May fit other lenses with a 52mm thread. Theoretically compatible with 52mm filters, but I haven't tested. Mounting thread is a standard 55mm camera thread, any hood with 55mm…
Remix of lens cover by balabas ( https://www.thingiverse.com/thing:782450 ) I did following main adjustments: enlarged to fit my lens size balabas's cover goes completely inside the edge of the lens and from my opinion there is risk of…
Bokeh is the way the lens renders out-of-focus points of light, this is reflected in the shape of point sources of light in the background of photos. The bokeh shape is determined by the shape of the shutter, which means you can alter it…
My nikon j1 camera was dropped and the connection between lens and camera was broken. After 4 prints I got the tolerances correct and the print fits perfectly. Only there is still some cleaning work to do to remove the supports. Print…
Replacement for the Nikkor 20-35 f/2.8 D AF broken lock ring. Requires M2.5 nut and 6mm screw (there is also an uncut version, which requires lens disassembly). Print with 0.4 (or smaller) nozzle.
Please note there is an updated version of this Box. This is a storage/transport box for a UW-Nikkor 15mm Lens (Nikonos 15mm Lens) This project has two files. 1)The Box 2)The Lid They are supposed to be held together with (6mmx20mm)…
10.5mm Fisheye Nikkor cap for removed hood-FX modified lens 10.5mm f2.8 Fish Eye Nikkor is one of the most used lenses for taking 360 VR panoramas in a few shots. Especially when using FX sensor cameras. In this case, you have to remove…
The original lens hood was like 20 bucks, so I made my own. Depending on your printer, you may have to carefully file down the tiny plastic tab a little bit so that it snaps in more easily. Since I couldn't find accurate dimensions of the…
Used for film scans.
Lens hood for the El Nikkor Enlarger 50mm Lens
Bahtinov mask designed to fit over the original, integrated lens hood on the Nikon AF-S Nikkor 300mm f/4. Tri-Bahtinov generated using the webapp generator from Satakagi . https://satakagi.github.io/tribahtinovWebApps/Bahtinov.html
This is a storage/transport box for a UW-Nikkor 15mm Lens (Nikonos 15mm Lens) This project has three files. The Box The Lid The Lid with Text They are supposed to be held together with (6mmx20mm) magnets. You will need 8 of them. The fit…
This is a storage/transport box for a UW-Nikkor 35mm Lens (Nikonos 35mm Lens) This project has two files. The Box The Lid The Lid with Text They are supposed to be held together with (6mmx10mm) magnets. You will need 8 of them. The fit is…
Here is number two. I wasn't going to make a 100mm adapter. I was hoping to make a 65mm a 90mm and then a 180mm to round it off. But here we are. It's also funny to see a Nikon Lens on a Canon body. Let's talk about why, now that I have…
Number 3!!! This was the lens I wanted to start with. My Nikkor W 180mm f5.6 Large format lens. This thing is used to cast an image for a 4x5 or 5x7 large format film camera!! It's funny to see a Nikon lens on a Canon body. Let's talk…
Number 4!!! This was not something I even figured I would make. I just found out the Nikkor SW 65mm has a Flange distance of 70mm. So here we go it worked. It's funny to see a Nikon lens on a Canon body. I'm not 100% happy with this one…
Photography accessorie. Blenda HB-32 for Nikkor. Two sided position.
This may fit on other reversed enlarger lenses with m39 thread. However I only have El-Nikkor Enlarger lenses. Tested this on: El-Nikkor 40mm f4n El-Nikkor 50mm f2.8n El-Nikkor 63mm f2.8n El-Nikkor 75mm f4 El-Nikkor 80mm f5.6n El-Nikkor…
Is it ridiculous? Yes. But so is the glare on this camera. Don't be like me. Print this in a matte black PLA, or, better yet, use PETG to add rigidity.
A basic lens cap for the 70-300mm lens that uses the lens hood attachment to attach to the lens
Lens Hood Nikon F AF VR Zoom-Nikkor 80-400mm f/4.5-5.6D use fuzzy skin to beter look Category: Camera
