43mm Hood for W-Nikkor 3.5cm f/2.5 and f/3.5 Nikon Rangefinder Lens
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
43mm Lens Hood
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 46
- Makes
- 0
- Views
- 240
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
This is a lens hood for the following Nikon Rangefinder lenses:
- W-Nikkor 3.5cm f/2.5 (first and second versions)
- W-Nikkor 3.5cm f/3.5 (second and third versions)
The thread is 43mm x 0.5mm pitch, which matches Nikkor lenses from this era. Due to the outer flange I designed, it may not fit properly onto other lenses with a 43mm filter ring. It might fit onto the W-Nikkor 2.8cm f/3.5, but I don't have one. It shouldn't be mounted on modern lenses with a 43mm x 0.75mm pitch.
The front of the hood is designed to use generic 58mm lens caps. It's not threaded for filters.
My sample is printed with PETG-CF on a 0.4mm nozzle with 0.12mm layer height. You may need to make adjustments to your settings to get the threads to come out properly. The hood should be printed face-down.