1 / 6
43mm Hood for W-Nikkor 3.5cm f/2.5 and f/3.5 Nikon Rangefinder Lens — zdjęcie 1
1 / 6

43mm Hood for W-Nikkor 3.5cm f/2.5 and f/3.5 Nikon Rangefinder Lens

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

43mm Lens Hood

Ocena
0 / 5
Polubienia
5
Pobrania
46
Wydruki
0
Wyświetlenia
240
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

This is a lens hood for the following Nikon Rangefinder lenses:

  • W-Nikkor 3.5cm f/2.5 (first and second versions)
  • W-Nikkor 3.5cm f/3.5 (second and third versions)

The thread is 43mm x 0.5mm pitch, which matches Nikkor lenses from this era. Due to the outer flange I designed, it may not fit properly onto other lenses with a 43mm filter ring. It might fit onto the W-Nikkor 2.8cm f/3.5, but I don't have one. It shouldn't be mounted on modern lenses with a 43mm x 0.75mm pitch.

The front of the hood is designed to use generic 58mm lens caps. It's not threaded for filters.

My sample is printed with PETG-CF on a 0.4mm nozzle with 0.12mm layer height. You may need to make adjustments to your settings to get the threads to come out properly. The hood should be printed face-down.

Tagi