Liczymy pasujące modele…
Ablageschale für Nikon Messsucher 5cm f1,4. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. ……………. Storage tray for Nikon rangefinder 5cm f1.4. The tray is 1 to 2 mm larger in…
The original metal body cap for Nikon rangefinder cameras can cost hundreds of dollars on the used market. I modified RobotToaster's excellent cap I found online many years ago. While the fit was good, I found the front end to be too long…
This model is compatible with the lego system.
Every wanted to impress your friends with the fact that you go WAY overboard for something as simple as foam flinging? This smart scope is just for you! As of now you are going to have to code it yourself until I post the code (My…
Made for Eye Distance of 65cm and a basket of 32" height. Basket has to fit in window of card. Card has to be held 65cm away from the eye.
This model is compatible with the lego system.
Softauslöser (AR-1) für die Nikon Kameras mit Außengewinde um den Auslöser. Getestet an S2, SP, F und F2. Wie stabil der Softauslöser ist habe ich nicht gestestet, aber er funktioniert. Eventuell mit einem stabileren Material als PLA…
This is a clone trooper helmet phase one. If you print it its actual size it is wearable.
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…
Ablageschale für Nikon Messsucher 5cm f1,4. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. ……………. Storage tray for Nikon rangefinder 5cm f1.4. The tray is 1 to 2 mm larger in…
Ablageschale für Voigtländer / Cosina 12mm f5,6 Ultraweitwinkel und 15mm f4,5 für Nikon F und Nikon Messsucher. Ultrawide Heliar Das Objektiv paßt mit oder ohne den Adapterring für die Nikon Meßsucherkamera. Die Schale ist im Durchmesser…
Ablageschale für Voigtländer Weitwinkel Objektive Skopar 35mm, 28mm, 25mm für Nikon Meßsucher Kamera. Könnte auch für das 21mm passen Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann.…
Gegenlichtblende / Sonnenblende / Störlichtblende / Streulichtblende für das 5cm f1,4 Nikkor für die Nikon Meßsucherkamera. Gewinde M43 x 0,5 Kann aufrecht stehend mit der großen Öffnung nach unten ohne Unterstützung gedruckt werden. Für…
Gelochte Gegenlichtblende / Sonnenblende / Störlichtblende / Streulichtblende für das 5cm f1,4 Nikkor für die Nikon Meßsucherkamera oder 50mm Leica Objektive mit M43 x 0,5 mm. Das Gewinde hat die Abmessung M43 x 0,5 mm. Drei verschiedene…
Gegenlichtblende / Sonnenblende / Störlichtblende / Streulichtblende für das 8,5cm f2 Nikkor für die Nikon Meßsucherkamera. Gewinde M48 x 0,5 Kann aufrecht stehend mit der großen Öffnung nach unten ohne Unterstützung gedruckt werden. Für…
Gegenlichtblende / Sonnenblende / Störlichtblende / Streulichtblende für das 10,5cm f2,5 Nikkor für die Nikon Meßsucherkamera. Gewinde M52 x 0,75 Kann aufrecht stehend mit der großen Öffnung nach unten ohne Unterstützung gedruckt werden.…
My FED 3 has scratched two of my nice glasses just from regular use so I fabbed together this piece. This offers protection from the sharp metal eye piece and prevents your glasses from getting scratched. You might have to scale down a…
This is a lens hood for the following Nikon Rangefinder lenses: W-Nikkor 3.5cm f/2.5 (first and second versions) W-Nikkor 3.5cm f/3.5 (second and third versions) The thread is 43mm x 0.5mm pitch, which matches Nikkor lenses from this era.…
Gegenlichtblende für das Nikkor W-Nikkor 1:1,8 f=3.5 cm Weitwinkelobjektiv für die Meßsucherkamera. Da ich dieses Objektiv - leider - nicht selbst besitze wurde das Modell mit geduldiger Hilfe anderer Personen, welche mir die Abmessungen…
Information This is a lens hood for the W-Nikkor 3.5cm f/1.8 rangefinder lens (in Nikon S mount). It should also fit on the rare third version of the 3.5cm f/2.5. It uses a M48 X 0.5 filter thread. "Why does it have all those holes?" On…
This is a little cap to cover the optics of the Bosch Zamo laser rangefinder. Should be printed standing on the top of the cap, so no support is required. I did well with .2mm layer height and PLA. Should work with pretty much everything…
This is a custom 3D-printed battery cover made to fit the Halo XRT6 Rangefinder . I designed it myself in Fusion 360 as a replacement for the original cover. The part is meant to slide in tight —not loose or wobbly. I adjusted the width…
This is an mounting option for a range finder to a pushcart umbrella holder The inside dimensions are 45mm x 72mm
A very simple model of a rangefinder. I decided to optimize it for printing with as few supports as possible. Orientation of all parts should already be correct and only the clip needs supports. This model is purely for decoration, even…
depending on the lenses, the housing of the Zorki rangefinder camera hangs badly around the neck. With this protective cover, you can attach the carrying straps to the sides or front of the camera body, depending on the weight of the…
These are 2 STLs I modelled for a friend who lost the power button on their Bushell Tour V6 Rangefinder. I printed these pieces in PLA so that explains why the design is so rigid. It is a very simple button design but fits easy and with a…
This is a rangefinder tripod adapter to allow you to mount a rangefinder on any 1/4-20 tripod. The three holes are undersize and unthreaded. You must tap the small hole to install a 10-32 helicoil.. The 2 larger holes should be tapped to…
let the print cool down before using or it might snap This tool should be usable for: zorki 1 zorki 2 zorki S fed 1 fed 2 maybe also usable on the Schraubleicas, im not really sure about this since i dont own any leicas to try this out on…
Ultrasonic rangefinder to measure distance over time via phyphox or serial connection. The sensorbox is designed to fit on a 10mm standing rod. Instructions, ardino file and other boxes can be found at guthub:…
Seems to work just fine in PLA, but would also probably be good to go in PETG. Walls and floor are 3mm thick, chamfers are 1mm (bottom) and 0.6mm (top)- all to be easily divisble by a printer nozzle diameter. Interior dimensions are…
I had difficulties getting the device to remain straight when pushing it against a wall, so this is what came from it. Does not add additional length to the device. Make sure to push it firmly until it sits flush, as the device uses its…
Tangoinnos Fire4000 Rangefinder Front Protective Cap. Cap rotates 270 degree to lay flat on the unit. Detent built in to keep cap open. Frame clamps onto front of unit. Bill of material (1) M3 x 3mm CNCKitchen threaded insert (1) M3 x 8mm…
Tangoinnos Fire4000 Rangefinder Lens Protective Cap. This cap is a press fit on the range finder. Cut the magnifier to fit inside the frame. Insert magnifier into frame then insert retaining ring into frame. Place/press complete frame on…
The original metal body cap for Nikon rangefinder cameras can cost hundreds of dollars on the used market. I modified RobotToaster's excellent cap I found online many years ago. While the fit was good, I found the front end to be too long…
The Nikkor P 8.5cm f/2 is one of the lenses that put Nikon on the map, but it came about when filter sizes were less standardized. It's really hard to find 48mm-sized step up rings and filters, and the ones that exist today usually have a…
Another lens with an original lens hood that costs thousands of dollars due to its rarity. I made this model which is much smaller, and includes vent holes so you can see the whole frame through the viewfinder. I've designed it as a…
IMPORTANT: I am not responsible for your print breaking and your camera falling. Do NOT print this with PLA. Always use a wrist or neck strap. This must be printed on its side for proper layer strength , do not print it from bottom to…
If you want to use the rangefinder on your Speed Graphic with your LomoGraflok back without needing to recalibrate it, then these spacers will have you covered. They fit both Pacemaker and Anniversary/Pre-Anni Speed Graphics. They simply…
This model is compatible with the lego system.
Every wanted to impress your friends with the fact that you go WAY overboard for something as simple as foam flinging? This smart scope is just for you! As of now you are going to have to code it yourself until I post the code (My…
ClicGear 3.5+ Clip for range finder holder, makes sure the range finder is the right height and available when you need it. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.16 Infill: 80%…
Model of a camera. Print 0.12mm layer height, support under lens and strap loops
This model can be used as a lightmeter. There are two bottom plates available, depending on where you want the meter to sit on your camera. The front one is used for my Minolta X-370, while the centered one is for my Pentax SFXn. This…
What's the best way to hang photos on your refrigerator door? A camera-shaped magnet. (Add a 9x1.5mm disc magnet to the back with a drop of CA) It looks sort of "like a" popular rangefinder model from Germany.
I drew up this case for my 2800.com. Unfortunately, my first 2800.com broke after falling 2 feet onto concrete—pretty disappointed since it was my first trip out with it. So I designed this case for my replacement. Make with TPU.
Body cap for Contax/Kiev rangefinders. Thanks to pz38 for providing the STEP file for his adapter, that I remixed this from: https://www.thingiverse.com/thing:4927503 Update: I've added a v2 that is combined to stop my slicer complaining.…
Cap for the FocusSpot port on top of the Kalart rangefinders found on Graflex Speed Graphic, Crown Graphic and other cameras. Remix of the laser pointer mount by brettpim on Thingiverse. I wanted something to block the port to keep light…
Side includes a CSK hole for 3mm self tapping screw to fit into the belt clip hole if the friction fit is not enough. Bottom features 3x M4 CSK (PCD24mm) for mounting to your custom mounting plates, feel free to edit the “DT11 Plate…
LS-1/ LS-1S Rangefinder Cover This is a protective cover for the LS-1/LS-1S Rangefinder (also known as Alfawise LS-1, Xiaomi ATuMan LS-1... same product, different branding). It's a quick and easy print (around 2h) and it has been…
READ BEFORE PRINTING! This is a non-commercial print, this means you are not allowed to sell files or prints of this model. ------------------------------------------------------ What is it for? I created this to make it easier to bring…
Similar to other clicgear accessories , this basket snaps onto the side knob on your cart. Its a convenient place to put your rangefinder if you are using the mesh basket for other things. The keyhole fit is pretty tight, depending on…
This hood/cover for the Nikon Aculon 6x20 was requested by my dad. Printed in TPU.
See hivemonkey.com for the full project writeup, including electronics, code, Stryfe modifications, etc. This is a case specifically designed to fit on the left side of a Nerf Stryfe and mount a particular homebrew electronics package,…
Next Update: Better storage and support for the lower part of the visor is coming soon. Update: Now with a cover for transport. This is a credit card sized range finder. Assembly: Remove the optics, stand and front sight from the kit…
Printed 50% infill 5 Walls SIG Sauer Kilo Rangefinder Picatinny Mount
Printed in TPU. Fits over eyecup for protection
based on the bf2 model uses 6 5x3 mm magnets to rotate and lock in raised or lowered position -stack 2 magnets in the base and press on the stalk to assemble the cap has worked for me as a friction fit only the top part should need…
I try and print all of my black series parts at 100% infill. Supports are needed. print standing straight up or leaning back at a 45.
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…
This is a rangefinder that uses two laser pointers (link below) to show the optimal scanning distance for the Mole 3D Scanner by 3DMakerPro. The lasers converge at 230mm. There is a second file that omits the laser pointer holders/tubes…
This print does not work right out of the box. It requires a few additional parts and some post-print work: 1. You will need to drill out the 5 screw holes with a 7/64 bit, and add a 45 degree countersink with a countersink bit in order…
I printed this at 0.1mm layer height since the filter threads are a 0.75mm pitch, best use as low as you can get and print at a slower speed. The fit is a bit loose until it's tightened down, but it's not going anywhere once in place. You…
This model connects the chopped up mandalorian helmet with a rangefinder and a cap with the mandalorian insignia. The model is a remix of the Helmet (https://www.printables.com/de/model/583752-clone-trooper-rangefinder-bf2) and the…
This is a camera that's been a long time coming. As far as I know, there's nothing quite like it out there. All the files are also available on Github and that's where updates will be posted first, so check there first. The LRF45 is a…
ATN Front Scope Cover with Rangefinder. Can't find a scope cover for the very abstract front end of your ATN Night Vision or Thermal scope that has the ABL Range finder mounted? Look no further. This would also make a great gift. Print…
This is a protector for glasses if you use older Leica M rangefinder cameras. These cameras have a metal ring around the rangefinder which can cause scratches on your glasses. This protector works with Leica M2, M3, M4, M4-2. In the…
What is this ? This is a laser rangefinder using the STMicroelectronics ToF sensor VL53L0X. I designed and assembled a printed circuit board with the following components and a 3D printable case.…
Replacement case for the bushnell rangefiner, more practical than the zipper. - PLA - print each part separately, carefully snap the hinges together afterwards - prints without support
I wanted to have a mini laser rangefinder to carry along with my Zeiss Ikon Nettar and I didn't want to use the included mini strap, so I designed it to hold it and use it at the same time to properly focus the camera. My design was based…
Parametric model with FreeCAD file of a cover for a mini laser rangefinder like https://www.aliexpress.com/item/1005005570855120.html to protect the laser, usb, display and knobs.
Simple Remix of the Rangefinder Card including an alternative flat base & Picatinny Mount
Ein paar untere Einsätze für die alten Kamerataschen für die Nikon Meßsucherkameras. Veschiedene Höhen und verschiedene Unterteilungen. Es passen die Objektive von Voigtländer, oder das Zeiss Biogon, ein Einsatz ist für das 12mm…
Ein paar obere Einsätze für die alten Kamerataschen für die Nikon Meßsucherkameras. Verschiedene Höhen und verschiedene Unterteilungen. Z. B. für Sucher oder andere Kleinteile. Es empfiehlt sich die Einsätze innen mit Samt oder ähmlichem…
Case for Bosch PLR15 PLR-15 Laser Rangefinder. Prints without support
Designed to be used on ZUCA cart pole, parametric just like original design, STL files are for Nikon Coolshot 20GII
This is a working rangefinder which is remixed off of camuisc's file. It rotates and locks into position. The changes to the model is only the head and the rest is the same. The head has a 0.4mm slit which is perfect for fitting face…
