Halo XRT6 Rangefinder Battery Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom snug-fit battery cover for Halo XRT6 Rangefinder, 3D printed with 17.34mm width for secure slide-in fit.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a custom 3D-printed battery cover made to fit the Halo XRT6 Rangefinder. I designed it myself in Fusion 360 as a replacement for the original cover.
The part is meant to slide in tight—not loose or wobbly. I adjusted the width by +0.1 mm on the X-axis, making the final width 17.34 mm, to get a snug fit that holds well without needing glue or screws.
Details:
Intended to fit the Halo XRT6 Rangefinder (Have not tried it on any other rangefinders)
Slides in and stays put—tight and secure (Battery strap may get in the way.
Modeled from scratch based on the original part
Prints well in PLA (Might be better in PETG for warmer situations)
Print Recommendations:
Layer height: 0.16 mm
Initial Layer Height: .20 mm
Wall Loops: 2
Infill: 15%
Supports: Not needed if you print it flat on the back side.