1 / 3
Arduino Lightmeter for SLR and Rangefinder Film Cameras — zdjęcie 1
1 / 3

Arduino Lightmeter for SLR and Rangefinder Film Cameras

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model is a housing for an arduino based lightmeter that mounts to a hotshoe.

Ocena
0 / 5
Polubienia
15
Pobrania
26
Wydruki
0
Wyświetlenia
790
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This model can be used as a lightmeter. There are two bottom plates available, depending on where you want the meter to sit on your camera. The front one is used for my Minolta X-370, while the centered one is for my Pentax SFXn. This should be able to fit onto any camera that uses a standard shoe mount. It has space to accommodate a 4 AA battery pack.

Parts used:

1 x Arduino Nano

1 x BH1750 Light Sensor

1 x SSD1306 I2C OLED Display

6 x 12 MM Buttons

1 x Toggle Switch

6 x M3 x 12mm Screws

2 x M3 Nut

4 x M2 x 12mm Screws

4 x M2 Nut

Uses shoe mount found at on bottom plate

Original software

My fork of software for I2C OLEDS, with Blue and White OLED compatibility 

 

Tagi