1 / 9
- The CAPelot -  10.5mm Fisheye Nikkor cap for removed hood (FX modified lens) — image 1
1 / 9

- The CAPelot - 10.5mm Fisheye Nikkor cap for removed hood (FX modified lens)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

10.5mm Fisheye Nikkor cap for removed hood-FX modified lens 10.5mm f2.8 Fish Eye Nikkor is one of the most used lenses…

Rating
0 / 5
Likes
2
Downloads
37
Makes
0
Views
298
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

10.5mm Fisheye Nikkor cap for removed hood-FX modified lens

10.5mm f2.8 Fish Eye Nikkor is one of the most used lenses for taking 360 VR panoramas in a few shots. Especially when using FX sensor cameras. In this case, you have to remove the hood in order to use it as a circular fisheye and not have the plastic light shade IN the picture. https://www.thefisheyelist.com/lens/nikon-af-dx-fisheye-nikkor-10-5mm-f-2-8g-ed/

After a gruesome, cruel treatment with the handsaw, your circumcised lens will not accept the original plastic cap anymore, which was actually gripping the foreskin itself. Or worse, you try to fit it and it will end up scratching your delicate and sensible bulging glass element that now is exposed all the time.

This is a safety cap. Born to naturally grip the lens body, stop on the last remaining of the hood, exactly where you shaved it, and leave room for the delicate glass, even if the focusing ring is set close and the lens group protrudes all out.

Design collaboration with Chiara Masiero Sgrinzatto. https://www.thefisheyelist.com/lens/nikon-af-dx-fisheye-nikkor-10-5mm-f-2-8g-ed/

Print Settings

Printer Brand:

Sovol 3D

Printer:

Sovol SV06

Rafts:

No

Supports:

Yes

Resolution:

0.15

Infill:

30

Filament: xcelled PLA matte filament fits better


Notes:

6 walls, Better if z seam is random. For best results print with closed part facing up, habilitate roof in support, and use cross support type.
Printing reverse gives less refined look but far less printing time and material.

Category: Camera

Tags