Counting matching models…
This is a case for the PI camera with fisheye lens and IR light https://www.amazon.co.uk/MakerHawk-Wide-angle-Automatically-Day-Vision-Night-Vision/dp/B07DRH5Y5S REMIX from https://www.prusaprinters.org/prints/3407
A camera case & mounting solution for the ELP 180 degree fisheye camera (ELP-USBFHD01M-L180). I designed this myself with some elements of other cases I've seen. The documentation on this camera is pretty crappy with a few drawings, so…
As a holder for the camera, I use the parts of jgeyer. You can find them here: https://www.thingiverse.com/thing:2736439/files I use: -holder_mk3_looser.stl -cable_holder.stl -knob.stl Print instructions Category: 3D Printer Accessories…
This is a remix which allowes to install the standard fisheye cams for the Raspberry which gives a nice wide view.
This is a zoom gear for use on a Tokina 10-17 lens on a Nautucam housing. It requires a M3 hex bolt and nut to secure the gear to the lens. NOTE: You must remove the rubber cover from the lens ring before installation, the same as you…
Camera mount for the OV5647 Fish Eye Raspberry Pi Camera. Works great with: https://www.prusaprinters.org/prints/150154-elegoo-neptune-2-raspberry-pi-camera-arm
This contraption holds the Samyang 8mm fish eye lens on a tripod rotating it around the nodal point and at the right angle as to minimize the number of shots needed for 360 panorama. 6 shots needed with 60 degree rotation and a 7th one…
A simple 2-part clamshell camera case for a VGA USB Camera Module (640x480) . Includes flexible mounting points. Camera can be oriented as desired and includes a connection port on the back with two small slots for a strain-relieving…
FishEye Camera Cover For Articulating Raspberry Pi Camera Mount
This is a easy-printing housing for an ELP stereo webcam, which comes as a bare board with fisheye lenses: the ELP-960P2CAM-L180 It accepts a 1/4"-20 nut in the bottom to allow tripod mounting: you may want to glue the nut in place (I…
A camera mount for the “MakerHawk IR Fisheye Pi Camera OV5647” for the SV06. Designed to fit the modular mounting system arms, which can be found here: https://www.printables.com/de/model/185322-modular-mounting-system-arms-customizable…
mount a Reolink fisheye camera to a standard octagon box. the mount that comes with the camera won't fit an electrical box. I wanted to use one as I needed to mount the camera lower than the trusses in the garage. I printed it out of TPU,…
assembly instructions for the modular system on the creator's page https://www.thingiverse.com/thing:1079807 you'll need one m3x25mm bolt and nut (or 20mm without nut) to secure the camera mount and the cover two m5 Tnuts and bolts to…
A remix for the camera housing to fit the MakerHawk IR fisheye camera (ASIN: B07DRH5Y5S). I also made a longer arm to get a wider overview of the buildplate. It requires: -4x M3x20 screws to assemble the camera housing. -1x M3x12 to…
Keystudio Fisheye Raspberry Pi camera mount for Prusa i3 MK2 3D printer. You will need one M3x35 screw, an M3 nut, and 4 M3x8 screws. Used this model as inspiration: https://www.thingiverse.com/thing:2521717/files Included a modified…
10.5mm Fisheye Nikkor cap for removed hood-FX modified lens 10.5mm f2.8 Fish Eye Nikkor is one of the most used lenses for taking 360 VR panoramas in a few shots. Especially when using FX sensor cameras. In this case, you have to remove…
(pour le français, voir plus bas) If the hole for the lens from the RPi camera case by @ZORK77_18465 is too small, I adjust the model (with 16.4 mm hole diameter) Settings Nozzle : 4mm Resolution : 0.1mm Infill : 15% Rafts : no Support :…
Bare-Minimum RPI + Fisheye Camera with automatic IR-Filter using MotionEyeOS. M3x4 knurled nuts and M3 screws are used inside the Fisheye camera holder. M2.5 3 3.5 knurled nuts and M2.5 screws are used to fix the RPI. 3/8 "-16 nut is used…
This is a Fisheye Camera Case from a Raspberry Pi Fisheye Module to Support night vision to a ESP32CAM as I had this camera lying around. The ESP32 Fisheye Cameras / Lenses contains a IR-Filter, so they won't work in night vision. You…
3D Model of the Arducam Day-Night Vision Camera (Fisheye) OV5647 5MP linked below. LINK: https://a.co/d/fcFQiCM
The original for Delta Kossel is 40 mm long as I have the need expanded to 45mm for Rostock mini. (to design carriage http://www.thingiverse.com/thing:1462452 ). There's an open file sldprt therefore you adjust if you need different…
Fisheye camera mount for for the "ZeroBot Pro - Raspberry FPV Robot" This camera with IR-CUT includes infrared night-view LED's. This camera will turn on the night view mode automatically! This results in a much better image. In trade-off…
i try to reduce the high of the ring tower with the fisheye lens for the ESP-CAM i use this cam module .. https://www.amazon.de/gp/product/B07YXYTY2K it works quite good. i use a 25mm ring the custom cover (this thing) you can screw the…
I'm not sure if my fisheye is different than everyone elses but it did not fit in one of the remixes for the lense that I am using. So I edited to fit my needs. This file only supports cameras that are 3.6mm. Please measure your camera…
This is a mount for the Pimoroni Fisheye Night vision camera. It has also built in guides for the raspberry pi flex cable. The currently solution attaches the camera to 3030 extrusion (Prusa MK3). This uses 10mm M3 screws and nuts. Print:…
This mount attaches Pi fisheye camera to the X axis motor. It has a slight angle tilting downwards. Requires the front plate from LC26 . Printed with PETG. Require supports.
EDIT 6/18/2015: I added "fixed" versions of the STL files that have been run through netfabb. Use these instead. I found this camera on eBay and prefered it to the official Raspberry Pi one. It has a mounted fish eye lens that can adjust…
print it flat on its back use high infill. I tested at 98% infill, Cubic printed from PLA+. takes 2 m3 heat inserts. i used m3x3x5mm but slightly longer should work.
Here is a lens cap that I designed for my Fisheye. Ideally print this in TPU so it's flexible and nice (I printed in eSun TPU 95A) but you can get away with any other filament. Solidworks project is included, to allow you to very easily…
This is a Fisheye mount from a Raspberry Pi Fisheye Module to Support night vision to a ESP32CAM as I had this camera lying around. The ESP32 Fisheye Cameras / Lenses contains a IR-Filter so they won't work in night vision. You will have…
I love fisheye lenses, both for artistic and technical purposes, and I have quite a collection from door peepholes to high-quality fisheye lenses. Unfortunately, few cheap options give full 180-degree views, and almost none give more than…
Remix with larger hole
Fisheye camera mount for for the "ZeroBot Pro - Raspberry FPV Robot" This camera includes infrared night-view LEDs. AliExpress: LINK Category: R/C Vehicles
It's fairly obvious that a crystal ball produces a fisheye view when you look into it... so why not have a camera look into it? That's what this thing does: mount a little crystal ball at an appropriate distance in front of a Canon…
The W-Nikkor 2.1cm f/4 requires a special lens cap, and the original cap is hard to find and quite expensive. So I designed one for anyone to print out. I've made versions with the flash coupler mount of the original viewfinder as well as…
printed in PETG you need : 1x M3x10 1x M3x16mm 2x M3 Nuts you also need Wires and a soldering Iron to connecting the power from the cam to the IR LED as seen as on the Photos i put a connector in between you dont need that but it makes…
Scaled the model and printed on the Core One with Overture 95A TPU using the default profile at 0.25mm layer height.
It's fairly obvious that a crystal ball produces a fisheye view when you look into it... so why not have a camera look into it? That's what this thing does: mount a BIG crystal ball at an appropriate distance in front of a Canon PowerShot…
The lens cap that came with the lens kept falling off, so a more secure replacement was designed. Version 1 works well but can still dislodge when pressed at certain angles. Version 2 is thicker, edge smoothed and includes a secondary…
This fan shroud is for object cooling. Category: 3D Printer Parts
The slanted panorama head meets all i wanted to have. Compact, easy to use and very quick to set up. Just slide your camera in. The design is very specific for setup i use. You would need: a Fujifilm X-T3 Grip MHG-XT3 Samyang 8mm 2.8…
Deckel für das Nikon Fischauge 8mm f2,8. Beim Aufschrauben oder Abschrauben keinen seitlichen Druck anwenden sonst klemmt das Gewinde. Der Kunststoffdeckel ist leichter verformbar als der originale Metalldeckel. Es empfiehlt sich das…
The 7Artisans 7.5mm fisheye is meant for APS-C, but by unscrewing the front element it is possible to remove the built in lens hood. This makes it a fisheye distored lens for full frame. This lens cap is meant to protect the front element…
A 3D printed adapter designed to mount the Lomography Fisheye No.2 35mm film lens system onto the Leica M39 LTM screw mount standard. This allows the circular 170 degree fisheye lens from the Lomography 35mm film point and shoot camera to…
I didn't like not being able to tighten my 20mm m2 bolts to lock in a specific position for my camera. A couple of small notches allowed me to fix that by giving enough room for a nut. Category: 3D Printer Accessories
Ablageschale für Nikon 8mm f 2,8 Fischauge. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. …………………… Storage tray for Nikon 8mm f 2.8 Fisheye. The tray is 1 to 2 mm larger in…
The W-Nikkor 2.1cm f/4 requires a special lens cap, and the original cap is hard to find and quite expensive. So I designed one for anyone to print out. I've made versions with the flash coupler mount of the original viewfinder as well as…
Deckel für das Nikon Fischauge 8mm f2,8. Beim Aufschrauben oder Abschrauben keinen seitlichen Druck anwenden sonst klemmt das Gewinde. Der Kunststoffdeckel ist leichter verformbar als der originale Metalldeckel. Es empfiehlt sich das…
