Fisheye camera with IR-CUT mount for ZeroBot Pro - Raspberry FPV Robot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fisheye camera mount for for the "ZeroBot Pro - Raspberry FPV Robot" This camera with IR-CUT includes infrared night-…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 27
- Makes
- 0
- Views
- 381
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
Fisheye camera mount for for the "ZeroBot Pro - Raspberry FPV Robot"
This camera with IR-CUT includes infrared night-view LED's.
This camera will turn on the night view mode automatically! This results in a much better image. In trade-off the sensor and as well the case is bigger compared to my other design.
Make sure the record LED its not turned off, otherwise the IR-CUT will not work (it is used to enable or disable the IR-CUT).
DO NOT USE "disable_camera_led=1" in "/boot/config.txt"
This design has support structure build-in to make it easier to print the big holes. Print as orientated in the stl file and enable support anyway!
AliExpress: LINK
Category: R/C Vehicles