Fisheye camera with IR-CUT mount for ZeroBot Pro - Raspberry FPV Robot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fisheye camera mount for for the "ZeroBot Pro - Raspberry FPV Robot" This camera with IR-CUT includes infrared night-…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 381
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Fisheye camera mount for for the "ZeroBot Pro - Raspberry FPV Robot"
This camera with IR-CUT includes infrared night-view LED's.
This camera will turn on the night view mode automatically! This results in a much better image. In trade-off the sensor and as well the case is bigger compared to my other design.
Make sure the record LED its not turned off, otherwise the IR-CUT will not work (it is used to enable or disable the IR-CUT).
DO NOT USE "disable_camera_led=1" in "/boot/config.txt"
This design has support structure build-in to make it easier to print the big holes. Print as orientated in the stl file and enable support anyway!
AliExpress: LINK
Category: R/C Vehicles