1 / 3
Nikon F Rear Lens Cap for Nikkor 2.1cm f/4 and Deep Fisheye Lenses — image 1
1 / 3

Nikon F Rear Lens Cap for Nikkor 2.1cm f/4 and Deep Fisheye Lenses

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Specialty deep rear lens cap for the W-Nikkor 2.1cm f/4, 8mm f/8, and 7.5mm f/5.6 lenses

Rating
0 / 5
Likes
3
Downloads
11
Makes
0
Views
93
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The W-Nikkor 2.1cm f/4 requires a special lens cap, and the original cap is hard to find and quite expensive. So I designed one for anyone to print out. I've made versions with the flash coupler mount of the original viewfinder as well as one with a standard cold shoe. The cold shoe model may benefit from supports, but either should be printable with bridging on modern printers. After printing, you can push in a small piece of 1.75mm filament into the mount indicator hole.

The design of the Nikon flash coupler, as well as the viewfinders for 2.1cm, 8mm, and 7.5mm lenses changed a lot over the years so it's possible some will not fit here. I've designed it to mount a type 7 flash coupler. Please let me know if you're having trouble mounting an accessory and I can revise the design to work for you!

Tags