Nikon F Rear Lens Cap for Nikkor 2.1cm f/4 and Deep Fisheye Lenses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Specialty deep rear lens cap for the W-Nikkor 2.1cm f/4, 8mm f/8, and 7.5mm f/5.6 lenses
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The W-Nikkor 2.1cm f/4 requires a special lens cap, and the original cap is hard to find and quite expensive. So I designed one for anyone to print out. I've made versions with the flash coupler mount of the original viewfinder as well as one with a standard cold shoe. The cold shoe model may benefit from supports, but either should be printable with bridging on modern printers. After printing, you can push in a small piece of 1.75mm filament into the mount indicator hole.
The design of the Nikon flash coupler, as well as the viewfinders for 2.1cm, 8mm, and 7.5mm lenses changed a lot over the years so it's possible some will not fit here. I've designed it to mount a type 7 flash coupler. Please let me know if you're having trouble mounting an accessory and I can revise the design to work for you!