Liczymy pasujące modele…
I was not satisfied with the already available lens-protectors so I made another one. This one is very slim and does not influence the general look of the sight too much. Meant for the cheap EOTech clones from China (e.g. for Airsoft). I…
This is a case for the HIKMICRO Mini2 thermal camera, with a sliding 20mm macro lens holder. A 20mm ZnSe CO2 focus lens is needed for this project. I used a 38.1mm focal length. Printed in PLA, 0.10 layer height Instructions: Fit the…
This print allows you to use a 4x microscope objective as a macro lens with a Nikon-Z mount camera. Based on the concept from this model , but designed not to use screws. I've been using the Nikon Z-fc. The cone, and the base of the model…
Camera lens rear caps for M42x1, M39x1, Pentax K, Sony E, Nikon F mounts. Print Settings Printer Brand: VoronDesign Printer: Voron 0 **Rafts:** No Supports: No **Resolution:** 0.15mm & 0.4mm nozzle Infill: 100% **Filament:** FDplast ABS…
This lens flipper prints in two halves which must be attached together. Alignment holes with pins are included. The handle will also need to be glued in, which can be done after the assembly of the two halves. This is a multi-color print…
I use this cap to protect the ZEISS lens inserts. I printed the cap once for one lens and then mirror flipped it and printed again for the second lens. I used soft TPU plastic
I created this case for my H14R.2 head lamp so it won't accidentally power up inside my pack. The case is part of a set of cases I created for different stuff I use as an event technician. The lamp needs to be twisted 360° against the…
A lens protector and kill-flash for your airsoft sniper optic. It was tested with a point blank (less than an inch) Hi-Capa pistol, and all four shots bounced away, however, obviously I cannot guarantee that this model will protect your…
Someone in the Virtual Boy Fans Unite group on facebook said his lenses were cracked. I didnt have any extras to send, so within an hour I'd removed the best original lens I had from one of my two working Virtual Boys, and I reverse…
I needed to repair a T66 flashlight that was missing its lens. This lens retainer will let you use a generic 28mm acrylic lens from AliExpress. Simply insert the lens between the 3D printed part and the flashlight and screw in place.…
I saw someone print something similar to this but for a different camera on Instagram, I lost the name so I feel horrible, but it was not my idea. It is an adapter for the lens from an old CVS brand disposable camera to fit into the Sony…
Bought a digital microscope (link to the exact model below) to use for inspecting Pokemon cards for grading, repairing fine solder joins on various PCB's ranging from 3D printer control boards to other various PCBs in need of minor…
I bought a nice microscope polarized light on Aliexpress but I didn't like that polarized lens is always in the optical path even when I don't need it. So, I decided this mount that allows to flip-in and flip-out the polarized lens when…
Acoustic lenses designed to be placed in front of R1855's tweeters. (they are attached through the hex allen slots). The intent of those "lenses" is to reduce the beaming effect in high frequencies. In practice the difference is not huge,…
Nikon bayonet mount to use various projector lenses on nikon camera's. The inside barrel width is 44mm wide and fits the Leica Elmaron 1:2.8/100mm and Leica Hektor -P2 1:2.8/85mm projector lenses PLA printed
Remixed DJI Action 4 lens cap with an "anti-scratch gap" between the lens and cover.
Printed on ender 3 pro with sprite pro direct drive extruder using tpu with shore hardness of 95. Using vase mode. https://business-lounge.heidelbergengineering.com/ch/de/products/hrt3-rcm/hrt3-rcm/gallery/
Camera lens rear caps for M42x1, M39x1, Pentax K, Sony E, Nikon F mounts. Print Settings Printer Brand: VoronDesign Printer: Voron 0 **Rafts:** No Supports: No **Resolution:** 0.15mm & 0.4mm nozzle Infill: 100% **Filament:** FDplast ABS…
Reproduction fidèle de l'emblème du RC Lens, adaptée pour une Impression multicolore à couches variables (sans MMU) . Paramètres utilisés pour la fabrication du logo mural (gcode fourni) Périmètres 2 Couches solides Dessus : 5 / Dessous :…
I made a mistake when working with the great LaserPecker LP5 and launching a project without remove the laser lens cover… and the disaster happened :). If you lost your cover, by accident or no :) like me, or to have a replacement you can…
A 3D printed lens to create film wigglegrams on a Canon FD mount camera (.step files included so you can adapt it for any camera) Joshua Birds blog post: https://joshuabird.com/blog/post/3d-printed-wigglegram-lens Hardware: 7x 1.4X3mm…
Parameters: Printer used: Prusa MK3s Filament: PLA+ I have printed these parts with a single extruder. Imade stops to change the filament in the first 3 layers (0,2mm each). If you need a help to print in 2 color: here you have a…
TPU front cap for the Helios 44M 58mm f2. I made two versions: one dualcolor with text and a simple one without text and one color. It might also fit for other versions of this lens but i don't know. The Fusion file is included in case…
I was not satisfied with the already available lens-protectors so I made another one. This one is very slim and does not influence the general look of the sight too much. Meant for the cheap EOTech clones from China (e.g. for Airsoft). I…
Because my Picatinny rail was too short and the standard off-the-shelf Lens-Protectors did not fit, I designed this shorter version. (mounted on a Tavor T21) The lens is taken over from the normal lens protectors that can bought e.g. on…
The orange lens mount ring on sony A7 quite annoying for me. made this to cover it
Use 3mm diameter, 3mm deep heat inserts on the sides. Printing: Layer thickness should be 0.1mm for the threads to print correctly.
This is a fairly compact case which will carry 10 pairs of daily wear contact lenses and a pair of glasses.
These are custom front lens caps designed for the Pentax UD 9x21 binoculars. The original binoculars do not come with front lens caps, so I created this model to provide proper protection for the lenses. Features: Designed to fit snugly…
No extra tips here. This is a remix of a remix. Follow the rabbit back a few makes for better info from better makers. Last photo is the original remix by huberjer.
E N G L I S H The model is slightly smaller than the lens itself, so when printed with TPU it holds firmly onto the lens. My design does not need any support. D E U T S C H Das Modell ist etwas kleiner als die Linse selbst, so dass sie,…
A model of a micro four thirds lens for anyone who wants to see how the lens looks like. You can 3D print it to see the size in real life.
This system allows a quick switch between 0.5x/1x/2x lenses for AmScope or Eakins stereo microscopes. Slightly twist the lens to unmount it from the microscope. Note that the lens is positioned lower with this system on, so that some…
I've printed in both PLA and PETG, and both works fine, though I prefer the variant in PETG.
This is an old version. For the new version go here Open source case for storage of lens filters of varying sizes. All parts were designed in OpenSCAD for a parametric approach allowing additional sizes to be easily generated and to…
EXTRUDR Easter Bunny 2017 Separate Sunglasses + Lenses >>> Reupload of the Extrudr Easter Bunny 2017 Separate Sunglasses >>> Lenses for Sunglasses (my remix) I made suitable lenses for the Extrudr Easter Bunny 2017 with separate…
This is a simple holder for lens caps. Now, you don't have to worry about losing or misplacing your lens covers while on the go. This 3D printable model will keep them safe, secure, and easily accessible. It is a very simple and quick…
Binocular covers are easily lost. Scope covers are expensive. 3D printed covers are usually bulky, fragile, and complicated affairs, with lots of easily broken moving parts. They also are difficult to properly size to your needs. TPU…
Solar light bulb shaped lens. Examples printed using PETG without supports. Small (1x scale) bulb with post or bracket mounting and large (2x scale) post mounted with threaded sleeve. Transparent bulbs are more subtle in daylight, White…
Currently it has the following variants: 62mm for Samsung S23 58mm for Samsung S23 62mm for Samsung A52 All of these are designed to go on top of the TPU case
Holder for 55mm lens caps with convenient attachment hole.
Heyho Here I designed 2 lens hoods for the Sigma 85 1.4 Art . 30 mm and 18 mm. I did not like how big the original one is but I still wanted to protect the lens with a hood! So I created a good and tight snap fit design that perfectly…
I wanted the lens to lay lengthwise so that the model is visible, instead of the end cap.
What is this? This is a fully printable dispenser for zeiss lens wipes that can be mounted onto an IKEA SKADIS peg board. How does it work? As you pull out the bottom package, the rest above fall down into place. To refill, take off the…
First I made a version that is held down entirely by velcro strap, but realized that PETG work great even without a strap, so I made a version that can be held together with a glue. Some might prefer velcro version as it can act as a…
I could not find a model which suited me. So I created one myself. This is a Gridfinity holder for those small filters you screw ontop of your cameralens. Have fun printing it.
A TPU lens cap for Nextbase 422GW dashcam to protect the lens when removing it from the windshield mount. The way it's designed, the cap offers a secure fit and doesn't slip off despite the cone shaped lens.
Medium size cinema style hood for the Sony 18-135 Kit Lens. This is friction fit. Printed in two parts out of PLA with fuzzy skin for a better appearance. On my print I was able to just friction fit the two parts and then friction mount…
I remixed from single lens Disposable Camera Lens Adapter by volzotan which is sony e mount and use the canon rf mount by jhobson. I'm appreciate both of originator! You use the same instruction and the same lens screwand the same lens…
Snaps into the small recess behind the lens and can stay on the AcePro. On the other side it press-fits the FSTOP-LABS filters. The press-fit is not as secure as the original magnetic mount, so I wouldn't rely on it for action sports.…
This fusion file is a bit of a mess, i will clean it up and re-upload when i get time. I just wanted to get this work out there for anyone else that felt like tinkering in the mean time. There's several revisions inside, the 2 most recent…
Recommended Print Material: PETG Print settings: 100% infill. This is a small print. Clips on the back side of a FLIR TAU2 lens holder to protect the inside from dust while in storage.
Objektivdeckel für die Hasselblad SWC mit M 67 x 0,75 mm Gewinde. Oder für Objektive mit M 67 x 0,75 mm Gewinde. Es empfiehlt sich, zumindest den Teil mit dem Gewinde mit der niedrigst möglichen Layerhöhe zu drucken. ………………….. Lens cap…
Objektivdeckel für die Gegenlichtblende der Hasselblad SWC mit M 86 x 1 mm Gewinde. Oder für Objektive mit M 86 x 1 mm Gewinde. Es empfiehlt sich, zumindest den Teil mit dem Gewinde mit der niedrigst möglichen Layerhöhe zu drucken.…
For those who tend to have all of those lenses and would like to display them on a shelf, I thought it would be nice to have a rear cap with some level of chunkiness to match those beasts. They feature deep design grooves to allow a…
Compatible with Model 20, 21 and 22 Overland! non printed parts needed: Optical PMMA LED Lens Reflector on Ali (i recommend 60 degree) 1W/3W High power LED 20mm star pcb on Ali (1W is sufficient, I recommend warm white for older cars,…
Here's a universal lens support bridge for the Arri LWS / Lightweight 15mm standard (60mm spacing on centre). You can use it flipped up or down depending on your needs and your lens diameter. Making this saved me about $400, maybe it'll…
The W-Nikkor 2.1cm f/4 requires a special lens cap, and the original cap is hard to find and quite expensive. So I designed one for anyone to print out. I've made versions with the flash coupler mount of the original viewfinder as well as…
This lens flipper prints in two halves which must be attached together. Alignment holes with pins are included. The handle will also need to be glued in, which can be done after the assembly of the two halves. This is a multi-color print…
This is a simple twist-on lens cap for a rare vintage lens made by Nikon. I made a few versions, including a multicolor version (pictured) as well as a version with no logo. Let me know if you have any issues or questions, enjoy!
Stackable Gridfinity bin to hold Sony alpha 5000 Telescopic lens.
Note that the shade is recessed, and so may not be usable on other makes of camera. My example is printed in PET-CF, 0.4 nozzle, 0.12mm layer height.
It should be combined with laser-cutting parts and 10 ml syringes and rubber tube.
conception d une canopy pour le cadre fyrelens de flywoo ou meteor pro pour ceux qui veulent faire le lens mod du air unit O4 lite avec une lentille du O3 . percement de 3 trous pour la fication de celle-ci sur n importe cam plat pour O3…
Adaptor to use Nikon F lenses on Canon RF body - only for lenses that have manual focus and aperture control ability. This includes pre-AF lenses as well as some Autofocus era ones - if your lens has physical aperture and focus rings,…
Lens hood compatible with Leica Elmarit 28mm v3
Copal 1 Extended Lensboard for Toyo Field Cameras This lensboard is for the 110mm front board of Toyo 4x5 field cameras, not the 158mm boards of the Toyo view cameras. I designed this from scratch in Fusion and it provides a 50mm…
HOTO Laser Level Model QWFGJ002 Beam Cover and Constrainer. As designed, the laser beams shine in all directions, when initially turned on. This creates a vision risk. This constrains the beams to the area needed and protects vision…
Fits this housing: https://www.printables.com/model/1453676-dji-o4-o3-lens-mod-housing Still fits the O3 camera. Thanks to LorenzFPV for the alternate versions!
Lampe fan-art inspirée du blason du Racing Club de Lens, montée sur un socle rond, pensée comme objet déco pour bureau, étagère ou table de nuit. Le modèle est conçu pour être imprimé en plusieurs parties (fond, contours noirs, zones…
This is a Lens Cap for the Streamlight ProTac 2.0 Rifle Light I put a thin o-ring in the grooves on the light head to snug up the fit.
DJI O4 light weight lens adapter kit. 1.6 grams. 30 Degrees.
Laowa 90mm f2.8 lens hood designed for those who have lost theirs. Features: Uses the lens bayonet to mount. Uses friction to stay in place instead of a neat spring :( Does not interfere with filter threads or lens cap. Anti reflection…
!!! During calibration, make sure they do not overtighten or crash into the rig !!!+ To make this drum work properly, the sensor position needs to be adjusted. In my case, I had to move the sensor slightly to get consistent triggering.…
Do you have a large lens with no filter threads but want/need to use filters. This model attaches to the barrel of the lens and lets you use one or two 100mm square filters. I believe any brand of 100mm filters. If you need to re-size…
Same idea as my version 1, just with a bit more work and a nicer end product. The lens holder part is made twice and will need a slightly larger lens shape cut into the top side, but not through, and a smaller lens shape that does go all…
Modelled in Fusion 360. I made this lens cap cover for my replacement dive housing. I have a Hero 3 and purchased some underwater filters but later leared that they fit the newer style Hero 4 housing which has a smaller lens opening. None…
The Fujifilm XF 27mm F/2.8 lens comes with a screw-on lens hood, which in turn come with a small injection molded PE lens cap. It fits snuggly and appears neat, but is a bit hard to manupulate when using the camera. There's too thin a…
Ring to replace a missing gauge cover. This one is for a 55mm lens up to 1/8" thick. I intended to use some plexiglass, but I cut my ring from a have clear plastic bottle. You cannot tap on it like plexiglass, but it works. This lens…
It is designed to be printed from flexible filament such as TPU/TPE with an optional hard insert (PETG) to make the cap harder. The design contains a few different versions: Simple flat: one piece with flat internal cap surface (TPU/TPE).…
Friction fit lens cover for a Canon PowerShot SX240 or SX260 digital camera. Designed to be attached with a small keyring to the camera's wrist strap. May or may not be able to pop off on its own when the lens extends. Printing in PLA is…
Rapsberry Pi picamera micro case. Designed to be mountable on flat surface or using self adhesive tape on smooth surface ie window. Best printed on ASA although my builds are on PLA for the test. The files: ✅ Front ✅ Gasket ✅ Rear ❌ No…
Update 08.02.2026 noticed that you can't flip the video feed in the goggles anymore. So cam needs to be rotated 180 degrees and therefore the "backplate" needed changes 15, 25 and 35 degree mount for Kayoumini 2.5 and the Flywoo O4 Wide…
Kayoumini Canopy for O4 lite with Betafpv's C03 lens mod. Print in TPU
Box for 30 trial Optometry Lens and box for trial frame Individual printed springs hold each lens avoiding disorder and damage Use two M2.5x10 screw for hinges Printer setting: 0.2 Layer 3 Wall 3 Bottom/5Top 10% Infill Tree Supports for…
3D printed rear lens cover compatible with SONY E mount. If you have multiple lenses facing rear up towards you, you can easily tell which one is which without tearing your bag apart. Printable on Prusa XL and MMU3 out of PETG, supports…
