Lens Caps (one part print)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lens caps in various sizes printed as one part.
- Ocena
- 4,957 / 5
- Polubienia
- 152
- Pobrania
- 961
- Wydruki
- 29
- Wyświetlenia
- 2871
- Oceny
- 23
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a lens cap for my Raynox-250 macro lens to go with the rear cover I designed earlier. After some modifications to make it easier to adjust dimensions I've uploaded more cap sizes.
Print without support. After print, place the cap with button towards a hard surface and push firmly until it snaps loose. Do the same for the other side. There's only a 0.3mm gap in the design so it will probably stick together somewhat. I've printed in 0.15mm PLA and PETG.
As always, if you find it useful a tiny donation goes a long way to show appreciation. :)
NOTE: This lens-cap uses the same spring mechanism as GlOwl but is otherwise designed from scratch: https://www.thingiverse.com/thing:3241700
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.
https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
