Lens Caps (one part print)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lens caps in various sizes printed as one part.
- Rating
- 4.957 / 5
- Likes
- 152
- Downloads
- 961
- Makes
- 29
- Views
- 2,871
- Reviews
- 23
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a lens cap for my Raynox-250 macro lens to go with the rear cover I designed earlier. After some modifications to make it easier to adjust dimensions I've uploaded more cap sizes.
Print without support. After print, place the cap with button towards a hard surface and push firmly until it snaps loose. Do the same for the other side. There's only a 0.3mm gap in the design so it will probably stick together somewhat. I've printed in 0.15mm PLA and PETG.
As always, if you find it useful a tiny donation goes a long way to show appreciation. :)
NOTE: This lens-cap uses the same spring mechanism as GlOwl but is otherwise designed from scratch: https://www.thingiverse.com/thing:3241700
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.
https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
