- The CAPelot - 10.5mm Fisheye Nikkor cap for removed hood (FX modified lens)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10.5mm Fisheye Nikkor cap for removed hood-FX modified lens 10.5mm f2.8 Fish Eye Nikkor is one of the most used lenses…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 292
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
10.5mm Fisheye Nikkor cap for removed hood-FX modified lens
10.5mm f2.8 Fish Eye Nikkor is one of the most used lenses for taking 360 VR panoramas in a few shots. Especially when using FX sensor cameras. In this case, you have to remove the hood in order to use it as a circular fisheye and not have the plastic light shade IN the picture. https://www.thefisheyelist.com/lens/nikon-af-dx-fisheye-nikkor-10-5mm-f-2-8g-ed/
After a gruesome, cruel treatment with the handsaw, your circumcised lens will not accept the original plastic cap anymore, which was actually gripping the foreskin itself. Or worse, you try to fit it and it will end up scratching your delicate and sensible bulging glass element that now is exposed all the time.
This is a safety cap. Born to naturally grip the lens body, stop on the last remaining of the hood, exactly where you shaved it, and leave room for the delicate glass, even if the focusing ring is set close and the lens group protrudes all out.
Design collaboration with Chiara Masiero Sgrinzatto. https://www.thefisheyelist.com/lens/nikon-af-dx-fisheye-nikkor-10-5mm-f-2-8g-ed/
Print Settings
Printer Brand:
Sovol 3D
Printer:
Sovol SV06
Rafts:
No
Supports:
Yes
Resolution:
0.15
Infill:
30
Filament: xcelled PLA matte filament fits better
Notes:
6 walls, Better if z seam is random. For best results print with closed part facing up, habilitate roof in support, and use cross support type.
Printing reverse gives less refined look but far less printing time and material.
Category: Camera
