1 / 2
RC tyres OD85mm=3.3" ID48mm=1.9" W 20mm=0.8" — zdjęcie 1
1 / 2

RC tyres OD85mm=3.3" ID48mm=1.9" W 20mm=0.8"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Print your RC tyres with some TPU filament. 14 different treads. 14 different tyre brands + 1 noname.

Ocena
0 / 5
Polubienia
10
Pobrania
92
Wydruki
0
Wyświetlenia
289
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Warning

Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones.

 

Printing

According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with a thicker tyre casing).

Print all the tyre parts whith à 100% infill. 

Except the foam part where I use 5% infill with TPU 95A (but for a heavier model or a softer TPU filament increase the infill).

 

In your slicer :

  • for the left tyres :
    • keep only one left sidewall (delete the others)
    • keep the right noname sidewall
  • for the right tyres :
    • keep only one right sidewall (delete the others)
    • keep the left noname sidewall

 

You can set a change color for the 2 last layers to hightlight the brand.

 

Feedback

It is welcome.

 

Remark

Several tyres with different inner diameters and widths are available. If you need a specific size you can request; if it is easy I can do it with a one month delay max and free.

I will create later some tyres with bigger outter diameters. 

 

Version

v1/v20250728

Tagi