Liczymy pasujące modele…
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
DungeonStick Church or Cathedral setup. Fast prints without support. Round DungeonStick connection for maximum flexibility. Easy storage Use the included couplers to create a symmetrical build. Functional doors (print in place). Give them…
Replacement level for the open/close function of a Bonavita "Wide Base Porcelain Immersion Dripper" coffee maker. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Infill: 50 Filament: n/a PETG Category: Kitchen…
[Updated 2026-02-02: released additional part: “1-7 pie", a requested missing fraction for the set, description updated.] Notes: A compact version was made that can carry all the pie pieces in one container here:…
Replacement battery cover for DumboRC DDF-350 Transmitter.
Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Max Rafts: No Supports: No Infill: 60% Filament brand: esun and hatchbox Filament color: marble white/yellow Filament material: pla/pla+
This adapts the corner piece of the original file to allow you to mount the filament sensor along the riser. Tony F's File was adjusted to allow the filament sensor to be mounted, the other files were used as references and deserve credit.
Lost Circle from Astro Bot PS5 game --- Cercle Perdu du jeu PS5 Astro Bot
the missing files can be found in the original model
This is the adapter I designed to attach the Smart Orbiter 3 (Revo Edition) to my Hypercube Evolution. It should fit the standard Hypercube Evolution carriage with 3mm dowel pins. It should work as well for the original Smart Orbiter 3…
This magical runic circle allows you to cast spells like a real wizard or witch on Halloween or every other night at Midnight. Unleash your best curses accompanied by wicked laughter, wave a magic wand over the runic magic disc, and light…
A simple tool for field assembly of all RC models that take nylon M6 screws to hold its parts together. Designed for my Multiplex Lentus for attaching horizontal stabilizer. Small size makes it ideal to leave in transmitter case to have…
Update: Added ML_12mm.STL for two layers and ML_24mm.STL for a single layer. --- This is the first of a three part series of multi-layered joysticks that use my arcade joystick mechanism (V3) and three of the push buttons from my Arcade…
Nice elegant planter, you cannot fill it with water but you can easily hide a 2 liter cut bottle inside (see photo). I used PLA WOOD and 0.6 nozzle.
This is a replacement circle pad cover for a Nintendo 2DS/3DS. This is just a cover for the circle pad if the old rubber has peeled off. Print this in TPU with supports on the bottom.
all parts are printable on a 220x220mm printer and all flat parts are CNCable on a 3018 PRO CNC hardware list 1.BEARINGS: 3x8x4mm X16 5x16x5mm X20 8x22x7mm 608 2RS X16 MGN12 C block + 50mm rails X2 2.SCREWS: M2x8mm X34 M2.5x10mm X20…
I have a DJI RC2 controller for my drone, but I wanted to mount my phone on the bottom so I could track the air traffic through an app called Flightradar24 . My phone has PixelSnap so I bought one of those holders to attach it to the RC2.…
A commercial license for the Cat Planter V3 Only, which includes the single and also multicolor version
Needed material: M3 16mm screw & nuts (x20) L298N Motor Driver (x1) ESP 32 (x1) DC Motor (x2) I printed with .4 mm nozzle, PETG for wheels and PLA for other
Only modified to use a NEMA17 stepper motor ## BOM: * cnc 60T pulley (2GT, always 2GT type) * one more 20T pulley ( the same type of the ERCF original design for selector motor) * 154mm belt, (2GT close loop) * nylong washer M5 0.5mm…
Inspired by the LTT magnetic cable management holders I designed these to go with 16 mm diameter x 5mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Each Magnets:…
Inspired by the LTT magnetic cable management holders I designed these to go with 16 mm diameter x 5mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets:…
Inspired by the LTT magnetic cable management holders I designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets:…
The original Mercedes Star on my kids' tractor disintegrated, so I created a replacement one. This is for the Rolly Toys FarmTrac MB 1500 / MB-trac.
Heavy duty buckle used to level up my laptop bag with a more industrial look. The buckle is super strong, easy to install on an existing bag without the need to sew. I'm using it on my daily laptop bag and it works well. Straps are easy…
v1 Of some Drift wheels for my RC Car. See Link for Car details. I have printed and tested these in PLA and they work a treat. Files added if you want to edit them…. No Support required. Outer Diameter 110mm Have fun and share if you like…
Pieces for the board game The Voyages of Marco Polo. I tried to redraw based on the pictures only, not having the original one. Only the Camel is made by TorbenLB ( https://www.thingiverse.com/thing:2756171 ), too nice design to draw the…
This is a niche use case, but maybe someone will find it useful like me for combining two excellent tools to easily and accurately cut shapes from 6 and 12mm MDF. Guide is a two part clamped adapter that fits around the DCS571 base to…
Note: All content on this page was translated in collaboration with an assistant. The original website is in German, and you can find all details and information in German on Wilma Tüftelbausteine . What are the Wilma Tüftelbausteine?…
As part of the project “A Journey to a a free Aeon Pro X Pump Grip”, i have designed various muzzle options to dial in how the pump grip setup on the Aeon Pro X will go. These muzzles replace the one on the blaster, and do not use any…
modern design circular tray print it in black it will looks great
The "Letter Marble Run" is designed to aid in the formation of uppercase letters. It consists of hexagonal building blocks that, when assembled correctly, create a letter shape. Students can trace the letter with their fingers or guide a…
The "Uppercase and Lowercase Letter Matching Puzzle" consists of 3D-printed puzzle pieces with raised letters, making them both visually and tactilely engaging. It is recommended to print the letters in a different color for clearer…
Arcade For Switch Mk1 and Oled With Buttons Board /!\ The plate 4 is for the non Oled version /!\ Print on place , 15% infill , no supports required. Add with Board Buttons Please clean your Bed thoroughly and check that it fits properly.…
This is a drop in modification (no shell cutting required) for the adventure force desperado to convert from a 6 shot cylinder to a chain at least 10 darts long, but probably much more (shown in the image are 30 and 21 darts…
Use with caution! I do not guarantee this brake to work for every motorcycle, and it should not be regarded as an extra safety, just a fun model!
After upgrading my SR-P Lite pedals with a load cell I wasn't happy with how they felt with their smooth plates and shallow angle. I found some decent looking and priced pedals on Amazon and created adapters for mounting them in a more…
For my exhaust air heat pump, I have several external wall air diffusers, so-called ALDs, in the shutter box. I designed this component to improve the sound insulation here. A “first element” and several “middle elements” are required.…
My son put a tail tidy on his Yamaha MT07 but needed the reflector for a roadworthy certificate. I made this bracket that mounts the original reflector flush with the base of the (Australian Motorcycle) number plate. May suit other…
I broke my ACXWA steering arm on my miot and i got a 3d printer so i remixed it with a wider head and bigger holes. If the steering binds at full lock use a zip tie (check image) and that should work very well. Also you its a high…
Reproduction fidèle de l'emblème du RC Lens, adaptée pour une Impression multicolore à couches variables (sans MMU) . Paramètres utilisés pour la fabrication du logo mural (gcode fourni) Périmètres 2 Couches solides Dessus : 5 / Dessous :…
I have remixed the ender 5pro skirts to fit 50mm fans for a cooling solution for the electronics enclosure. Use heat inserts in the centre part of the skirt for the fan.
Быстросъёмное соединение гибких шлангов с автомобильной мойкой высокого давления KARCHER.
Secure your favorite devices with this pierced nipple ! I designed it with key rings in mind, but it works well with paracords also. Glue it or add it directly to your design and print it without supports needed. Easy. Dimensions: Base is…
debes pegar en la tapa de abajo la lamina que hace contacto con la bateria en el polo positivo para que no se mueva dentro con el uso
To keep my keys and padlocks apart, I created these sleeves for the key and corresponding padlock. This one fits the Three Circles 264 padlock. Best results are obtained when printing the key sleeve upright and using supports for the…
So, I already had regular M10 GPS and decided to attach it to tiny FlyFishRC VX3.5 drone. I'm not shure about that front tooth for covering antenna, just wanted to protect somehow and not to use too much plastic. But if you don't like it…
I have a drawer on my arcade and I was looking for a solution to add a button
Many poses with lighter-armored options and different faces and haircuts.
A simple gridfinity holder for this handy torch. Printed in PLA, but any material should be fine.
The Rear Panel kit for the rc2014 is and excellent addition to your DIY vintage computer, but I never really liked the two large openings in the back of the panel to access the modules. The Bump-Out-Boxes for the rc2014 solve this…
I couldn't find a door prop I liked for the fridge in my camper, so I made one. This latches into the catches on the fridge and the door pins, creating a pretty sturdy arrangement that will allow the fridge and freeze to breathe to…
Sturdier RatRig 4 VCore Front Clamp with more clamping force
With just some nylon threads, 6 motors, and an Arduino, you can build your own hand. I'm also sharing the code. It’s more of an aesthetic solution, and it's also intended for robots. Here in action: When printing the fingers, set the…
This model is for the Lego firefighter aircraft, so you can mount it to your wall. It slides into the mount, and the wheels go on it. Since the weight is on the back, it won't fall when it gets mounted. They each need 3 5mm screws but you…
Need a keystone panel for your rc2014? This has you covered. Quick print, requires no support materials. Compatible with the Bump-Out-Box: https://www.printables.com/model/1068569-bump-out-boxes-for-the-rc2014 Source code on Github:…
A simple panel plank for the rc2014 Rear Panel Kit written in OpenSCAD. Compatible with the Bump-Out-Box: https://www.printables.com/model/1068569-bump-out-boxes-for-the-rc2014 Full source code on Github:…
This model is released under a No Derivatives license. If you would like to make a derivative version with your logo, or have us make one for you, you can get in touch at [email protected] via e-mail to discuss licensing terms. I hand…
Rlaarlo Gladiator ROG1 Dumbo RC X10F(G) Receiver Tray Adapter. This is a reworked tray to house the X10F(G) receiver that allows the larger receiver to fin inside the stock chassis. I used PLA at 100% for the stiffness since this part…
Couvercle de protection pour Xbox limitant l'absorption de poussière. Une extension trouée permet d'empêcher l'appui accidentel sur le bouton d'allumage. Le trou permet de vérifier que la console n'a pas été allumée par erreur afin de…
If you have a Mars 5 Ultra and want to wash the entire build plate in the Mercury Wash Station (the model PRIOR to the new one released Nov 2024) like I did, there wasn't any way to hang the build plate inside. I prefer washing the…
simple design of these VDV paddle shifter designs to fit onto Thrustmaster Sparco button boxes (P310 and R383) reccomend printing with a lot more walls and dense infill to make them as solid as possible, i printed mine with 6 walls and…
He creado estos racks expositores de 5 cajas de líquidos de la marca Bombo perfectas para tienda de Vapers Recomiendo la impresión con PLA para uso interior y altura de capa 0.20 o 0.28 con boquilla de 0.40 y con relleno de 15%.
This is a bracket for a 3/4 inch French cleat system. Autodesk files included and parameterized for other cleat sizes.
This holder is designed to hang a 1:10 scale RC car directly on an IKEA Skådis pegboard. The car hangs securely by its tires, with the holder optimized for tires with a diameter of 110 mm. Features: Compatibility : Fits RC cars with tires…
Add wide shelf to support Benchy model in pair with OrcaCube(with and without footprint) Add low wall(55mm) to save some filament(55mm is enough to fit Benchy model) Convert all(include original) parts to .step format Suggested settings…
These labeled circles are a physical version of this quadratic modeling activity where students graph the number of pennies (or nickels) that fit flat in a circle with the diameter of the corresponding circle. When printing for a…
Enables you to mount your Steelseries Arctis Nova Pro DAC to your Aluminium profile simrig. The mount also has a place to store your spare battery.
This is a digital 3D printable model of Jinx’s iconic handgun straight out of Arcane. 💥 The Zap Blaster features movable parts: – a rotating barrel – a hammer that moves with each trigger pull ⚡ And if you’d rather just show it off than…
Yo la imprimo en PETG. LME12UU diametro externo de este rodamiento es 22 mm, hay que tener en cuenta que le LM12UU, tiene un diametro externo de 21mm
I made a clutch service tool, inspired by www.agmotorsports.net. It is more portable if you want to use it on the racetrack an easy to store when not in use. The one agmotorsports made, is super handy when you use it often and keep it on…
camera mount for ender 3 v3 se/ke for creality crcc-s7 camera that comes with the creality box 2. requires no supports or any other special instructions and attaches the ¼ printable camera screws available.
Mount for attaching a mason jar oil lamp torch onto a pole to create a tiki torch. Sized to fit pint sized mason jars. The torch holder clips onto a ¾" pole and allows for deformation at the end of the pole from hammering. I used ¾" steel…
/!\ Attention ! (English below) Non testé / Non imprimer Non compatible avec mes boites de rangement Yu-Gi-Oh! Boite + Séparateur pour rangement de carte Lorcana / Magic. Le rangement est prévu pour des cartes : 6.35 x 8.89cm le modèle…
Color code ring for Neutrik Rean EtherCon connectors (and similar derivates) used on cheap ethercon cables.
I created this EtherCon Housing that fits over several generic RJ45 connectors on cat cables. Very handy when the locking pin broke of ect. Can be printed in the orientation shown without any support.
Print the mesh flat and then use heat (heatgun/hairdryer) to carefully wrap it around your wrist. I have posted 2 sizes of mesh depending on how big your wrists are. The rune stone fits into both. I painted mine with acrylic paint AFTER…
kivimaki's Tube Feeder was an immediate hit in my backyard and I quickly observed larger birds missing out on the fun. So…I created a perch ring of the same profile and added it to the base with enough structure to be sturdy. Fits on…
This is an original stand that I have made, for displaying a circular wood puzzles of my sister in a stable way. It is composed by a base and a plate. The plate is made up of four equal parts that fit together, so you have to print that…
The Mastercool pumps have an exhaust vent that doesn't allow any attachments. When I was drawing a vacuum on large chambers the pump was filling my garage with mist. I tried sponge filters, duct taping filters on, and nothing was working…
update 14/05/2025: As some people had issues with the previous file, I did some tests again and made new preset files. update 30/01/2025: As per a request I got, I added a print profile for an UltiMaker 2+ with a 0.6mm nozzle installed
After you have generated the g-code, delete the entire header block. Otherwise, the g-code won't work! The Ultimaker S-line firmware will check the firmware version and say that G-code file cannot be printed because it contains an…
![Pierced nipple [no supports needed]](https://media.printables.com/media/prints/1066237/images/8067244_74a40e1e-4310-41cf-84f0-1515b55bbbc4_a4fd3984-76e0-47f0-a820-c92d9bda6631/safety-loop.png)
![[Lorcana / Magic] Boite de stockage / Séparateur](https://media.printables.com/media/prints/1d454d23-673e-46c0-8699-a697f55ac00e/images/13055110_8ac5dc0b-78e7-4f6e-b055-66d77be72b85_2ff48165-fa2a-400d-8cdb-c4b142c60d26/photo01.jpg)
