1 / 4
Ikea Skadis Hand Vacuum and Air Duster Holder (48mm) — zdjęcie 1
1 / 4

Ikea Skadis Hand Vacuum and Air Duster Holder (48mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A hand vacuum/duster holder for the Ikea Skadis system. Designed for the PeroBuno vacuum but may work with others

Ocena
0 / 5
Polubienia
8
Pobrania
38
Wydruki
0
Wyświetlenia
178
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I created this Ikea Skadis compatible vacuum and duster holder as I was sick of my hand vacuum laying around. I use it to suck out all the strings and bits and bobs out of my printer, it's a very handy tool to have around. Also use it to blow off things, etc.

There are a couple of other vacuum/duster holders available, but I felt like they didn't have enough “wall height” and could allow for it to be knocked off the holder easily, especially since I keep mine in “vacuum mode” more. 

Anyway, the Skadis system is amazing and there are tons of accessories on printables and elsewhere, I figured I would contribute as well. 

Diameter of the holder is around 48mm. It fits my vacuum nicely. I have a PeroBuno vacuum, but similar models will probably work, too. It could hold other things with a similar diameter, if you wanted. 

Print Settings:

I ran this with 10% infill in PLA, gyroid. Supports are necessary for the Skadis Pegs. PETG would work great as well, or whatever other filament you want.

Tagi