RC tyres OD85mm=3.3" ID48mm=1.9" W28mm=1.1"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print your RC tyres with some TPU filament. 14 different treads. 14 different tyre brands + 1 noname.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 154
- Wydruki
- 1
- Wyświetlenia
- 528
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Warning
Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones.
Printing
According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with a thicker tyre casing).
Print all the tyre parts whith à 100% infill.
Except the foam part where I use 5% infill with TPU 95A (but for a heavier model or a softer TPU filament increase the infill).
In your slicer :
- for the left tyres :
- keep only one left sidewall (delete the others)
- keep the right noname sidewall
- for the right tyres :
- keep only one right sidewall (delete the others)
- keep the left noname sidewall
You can set a change color for the 2 last layers to hightlight the brand.
Feedback
It is welcome.
Remark
Several tyres with different inner diameters and widths are available. If you need a specific size you can request; if it is easy I can do it with a one month delay max and free.
I will create later some tyres with bigger outter diameters.
Version
v1/v20250728