1 / 5
Fork Seal Driver Tool - KTM/Husky/GasGas (48mm) — zdjęcie 1
1 / 5

Fork Seal Driver Tool - KTM/Husky/GasGas (48mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Driving tool for KTM/Husky/GasGas (48mm) dirt bike fork seals New Updated Version out now!

Ocena
5 / 5
Polubienia
116
Pobrania
1360
Wydruki
3
Wyświetlenia
5103
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

--Updated V2 Available Now!--

Features 3mm alignment pins and better clearance! Use standard nails as alignment pins for more consistent driving.

 

This is a fork seal driving tool for use with 48mm diameter dirt bike forks. This was designed with WP dual chamber forks in mind, but will service numerous other fork types from KTM/Husky/GasGas.

 

There are two lips designed into the seal interface surface that ensure a proper fit when hammering the seal into place. The seal interface surface was designed to clear the upper fork tube, while the driving face is much beefier to withstand hammer blows.

 

I couldn't take pictures while using the tool due to fork oil but it has been used without issues on two occasions. Printed with 2 walls and 40% infill. Print vertically, no support needed.

Tagi