Custom NEMA17 mounting plate for Ender 3 cable chain (compatible with Jwhiskey3D's chain / CR10 & Ender 3 Drivinator)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom NEMA17 mounting plate for Ender 3 cable chain (compatible with Jwhiskey3D's chain / Madau3D's Drivinator)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
2026-06-21 - Update v1.4:
I've realized that v1.3 was buggy and the X limit switch could not be reached due to the geometry of the chain link on the plate. I've rounded it a little more and hopefully it works better now. I've also added a curved slot to the chain link on the plate so that you can thread through the cables without having to pull them out completely.
Pictures still show v1.3. I might update them later.
Initial Text:
I was too stingy to reprint a Drivinator bracket with a cable chain mount point and my chain came in from a different angle anyway so I've decided to design a custom retrofit option which bolts onto the backside of the direct drive NEMA17 motor. You will need four M3x40. screws to mount this part.
The mount is compatible with Jwhiskey3D's cable chain (and Vijit's remixes which I've used) and the CR10 & Ender 3 Drivinator desinged by Madau3D.
The 3mf file contains the slicer settings I've used but I've also included the STEP and FreeCAD file to allow easy remixing.
Other parts in the pictures are: