HevORT ZR 2.6 Reduction gearing (Retrofit) with triple bearings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 2:1 gear reduction for the HevORT ZR 2.6 Z-axis. Can be retrofitted without dismantling the ZR 2.6 system.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 33
- Makes
- 0
- Views
- 427
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
A 2:1 gear reduction designed to bolt in place of a Nema 17 motor. It is specifically remixed for the HevORT ZR 2.6 Z-axis from the original design by iZOOM. It can be retrofitted without dismantling the bed, ball screws, mounts, etc., i.e. a direct drop-in for the stepper motors. It was designed for heavy bed assemblies that without gearing will move down by spinning the stepper. The gear reduction will prevent this.
BOM (per motor)
-Qty 1 Reduction plate
-Qty 1 Reduction plate cap
-Qty 1 Nema 17 motor
-Qty 1 75mm Length 5mm dia shaft (corbon or steel)
-Qty 3 625-2RS bearings
-Qty 4 M3x12mm hex flat head for motor mounting
-Qty 4 M3x32 screws for cap
-Qty 4 M3 screws for motor plate to original mount (screws that previously held nema motor)
-Qty 8 M3 heat set inserts
-Qty 1 Gates GT2 6mm width 40 tooth pulley
-Qty 1 Gates GT2 6mm width 20 tooth pulley
-Qty 1 Gats GT2 6mm width 158mm length (80 tooth) closed loop belt
It is recommended to make a test print to validate your settings such that the bearings fit snugly in the motor plates.
Print Settings
- Rafts: No
- Supports: No
- Resolution: 0.5mmx0.25mm line with 0.4 nozzle
- Infill: 30% gyroid
- Filament color: Black
- Filament material: PETG
- 5 walls, 5 bottom and top layers