31 models
The HD12MGN9 Tentacool Beacon duct by MirageC and sillysam71 has been adapted to decrease the y-offset. It has also been lowered slightly to fit my setup, please refer to the pictures. A suggested print orientation and support layout for…
Italiano Sistema di gestione Z Wobble della Hevort adattato per Artillery X1. Il sistema si basa su 2 supporti distanziati tra loro da magneti in fase attrattiva e sfere di acciaio per tenerli distanziati ma liberi di oscillare in caso di…
Hello everybody, these are mounts for a Duet 3 board, a Raspberry Pi, a 80mm and 92mm Fan. I use a Raspi 4 and fans from BeQuiet!. But other models should fit as well. The entire asselby is about 35cm long. So make sure that 35mm DIN…
My new Sapphire Plus Toolhead for NF-Crazy Hotend. Please Note that the Bed has to be relocated by about 36mm in y- direction and you are loosing about -10mm in y travel, -5mm in x travel. Klicky Probe using 7x3x2mm Magnets Performing…
Original version for clip on fan or Dragon LC. 2022-06-13: Added version with integrated 40mm fan duct.
This decoupler is meant to reduce Z wobble. It is based on the design from the HevORT as seen in this Video: https://www.youtube.com/watch?v=mqSQhwqSzvg Print instructions I printed the parts in PETG with a 0.6mm nozzle, 0.24mm layer…
You have to get your Extrusions leghts right its not that easy to Change. Draw it first in Cad to get the right lenghts. Frame should be Blind-jointet For now its only for 1204 Ballskrews eventually i will mod it for 1605 if that design…
VZ Hextrudort Rapido UHF for mgn9
Credits MirageC Initial work and for designing this awsome Printer
0.15 layer 45% Infill support (tree) nach ermessen
I has down a step file from thingiverse. I breakdown stl file from its and upload
Moves the optical endstop for Y axis to the rear of the printer to improve cable routing for rear electronics bay.
I created this for my HevORT (see hevort.com) for the Goliath Short with adapted Tentacool. It is mounted below a 3030 extrusion. Height can be adjusted in a range of 5mm. A 5mm metal rod is used to join the parts, cause i dont like…
This is my version of the Hevort's 2.6ZR axis. It uses 12mm lead screws instead of ball screws. I've been running it for 6+ months now with no problems and I think it's a viable alternative to the ball screw version. The build is very…
This is a temporary bracket to hang the bed in the printer while installing it with two free hands. Especially for large sized HevORT printers this can be a real relief and saves backpain and prevents dropping the bed by accident while…
HevORT X-Carriage for the Dragon Burner For my HevORT (CoreXY) there was no X-carriage that cleanly fits the Dragon Burner , so I designed my own from scratch in FreeCAD . The existing carriages are optimized for low mass and speed — this…
Just a simple adapter to mount the ADXL345 sensor on the HevORT carrier. How to use the sensor with Klipper : https://www.klipper3d.org/Measuring\_Resonances.html Category: 3D Printer Accessories
My attempt to make the mounter for the Mosquito hotend and Sherpa mini extruder. You will need some M3xD4.2XL3.0 brass thread insert to assembly the mounter. The 5015 fan duct is from Bear Extruder. 2020-12-06 : New design with better…
Because the Titan aero is very similar to the hemera, I modified MirageC's official Hemera mount to be used with the titan aero. Assembly : https://www.tinkercad.com/things/eVw59P6MlFR Change Use m3 heat thread insert instead of hex nuts.…
acidbee 2020DoorLatchMagnetHolder Replacement for the standard AcidBee door magnet latch but mounted on 2020 extrusion instead. Requires: 2x M5*8mm screws 2x M5 2020 extrusion nuts 2x 10mm dia * 5mm Magnets (same as standard) motorcable…
Welcome to the HevORT XHD12! What is it? Several members of the HevORT community were starting to build 3d printers larger than 500mm which is about the maximum that the standard 20mm gantry beams can handle before having rigidity issues…
This is a simple Filament Holder that fits over the recent HevORT "Acid Bee" Enclosure. I have modified it to fit over my 5.4mm acrylic panels, you will need to modify the model accordingly for your panel size or lack of. 80mm arm fits…
A MASSIVE round of applause to MirageC; not only for his design but willingness to share it with our 3DP community. This is a remix of the recently updated HD12 MGN9 CFx gantry. I love the design as usual but felt like these are soooo…
A MASSIVE round of applause to MirageC; not only for his design but willingness to share it with our 3DP community. Please check out his work and join the fun. This is a remix of the recently released split carriage design for the STD…
Remix of the XY flag because the BMG/Titan Aqua Frankenstien's berd air cooling will hit the frontleft SFU mount. X-flag is elongated to 21mm to be cut to your prefered length. Print Settings Printer Brand: Creality Printer: CR-10S Rafts:…
Really like the original Design from kuhnikuehnast , but I couldn't use it any more since I build an enclosure around my Hypercube. The spool holder is strong enough to hold a 1 kg spool with just the one bolt.
This is a remix of the recently released RIDGA HextrudORT 1.65 for Rapido but cut up to accept the E3D mount. I was so excited to try it out on my own that I made this! The original E3D HextrudORT was used as the base for the spliced…
To use TriHorn Duct, changes in EVA2. Duct wide now 35mm Print Settings Printer: Hevo mix Rafts: No Supports: Yes Resolution: 0.16 to 0.2 Infill: up 25% Filament: any ABS ASA PETG any Category: 3D Printer Parts
A 2:1 gear reduction designed to bolt in place of a Nema 17 motor. It is specifically remixed for the HevORT ZR 2.6 Z-axis from the original design by iZOOM. It can be retrofitted without dismantling the bed, ball screws, mounts, etc.,…
I plan to use these with ultra-thin screws, but so far only tested on button cap screws.
Cover photo: Red is MGN12 Linear rail, Green is BWI's bracket, and Blue is this part. 2 parts depending on your requirements, since BWI doesnt include such a part in his files…
